From noreply at sourceforge.net Thu Jun 17 09:10:22 2010 From: noreply at sourceforge.net (SourceForge.net) Date: Thu, 17 Jun 2010 07:10:22 +0000 Subject: [spambayes-bugs] [ spambayes-Feature Requests-3017463 ] add "spam" and "not spam" buttons to Outlook 2010 Ribbon Message-ID: Feature Requests item #3017463, was opened at 2010-06-17 00:10 Message generated for change (Tracker Item Submitted) made by billvb You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498106&aid=3017463&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Outlook Group: None Status: Open Priority: 5 Private: No Submitted By: Bill Van Buren (billvb) Assigned to: Mark Hammond (mhammond) Summary: add "spam" and "not spam" buttons to Outlook 2010 Ribbon Initial Comment: Spambayes controls appear only in an "addins" tab in Outlook 2010, so you have to navigate away from your Mail controls to use them. Please enable these buttons to be added to the main Mail tool 'ribbon'. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498106&aid=3017463&group_id=61702 From noreply at sourceforge.net Tue Jun 22 15:00:19 2010 From: noreply at sourceforge.net (SourceForge.net) Date: Tue, 22 Jun 2010 13:00:19 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-2906094 ] Outlook 2010 crashes w/ SpamBayes because of DEP Message-ID: Bugs item #2906094, was opened at 2009-11-30 17:15 Message generated for change (Comment added) made by mrzeno You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=2906094&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Outlook Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: duveneck (duveneck) Assigned to: Nobody/Anonymous (nobody) Summary: Outlook 2010 crashes w/ SpamBayes because of DEP Initial Comment: Outlook 2010 (beta) crashes while loading when SpamBayes is enabled, reporting a Data Execution Error. It then disables SpamBayes and opens normally without it. Adding OUTLOOK.EXE to the DEP exclusion list has no effect--it does not solve the problem (unlike in earlier versions of Outlook.) It appears there is no way to get SpamBayes to work with 2010. Because of this, I am also unable to test how SpamBayes' toolbars work with the new ribbon interface in 2010. ---------------------------------------------------------------------- Comment By: mrzeno (mrzeno) Date: 2010-06-22 13:00 Message: Hi, sadly i rest with the same problem: Windows 7x64 Outlook 2010 final x86, Spambayas 1.1a6. DEP in Outlook unchecked; DEP in System configuration set to use exceptions and added outlook.exe (http://spambayes.sourceforge.net/faq.html#id68) as well as all exe in program files x86\spambayas\bin\*.exe (all applications in the list are checked). (Jamie Hanrahan) However the it still doesnt load ("There was an error initializing the Spambayas Addin"). When i first installed it, it worked. Reinstall didn't helpt though. Thanks you for any further hints! ---------------------------------------------------------------------- Comment By: Mike Honey (mikehoney) Date: 2010-05-07 15:26 Message: I just tried the 1.1a6 release but can't get it working. Win 7 x32 and Outlook 2010 RTM. Outlook starts but reports an error: There was an error initializing the Spambayes addin. I turned off DEP mode in Outlook as per danmcco's post below. I looked into System DEP properties - it was already set to "Turn on DEP for essential Windows programs and services only". It looks like this is the lowest setting? I previously had Spambayes 1.0.4 working well on Outlook 2007. Then upgraded Outlook to 2010, uninstalled Spambayes 1.0.4 and installed Spambayes 1.1a6 Happy to be the crash-test dummy on this one - been using Spambayes for many many years and love it. ---------------------------------------------------------------------- Comment By: Mark Hammond (mhammond) Date: 2010-04-29 12:10 Message: The 1.1a6 release should have this fixed - please let me know if this isn't the case (and even if it is :) ---------------------------------------------------------------------- Comment By: Jamie Hanrahan () Date: 2010-04-29 09:27 Message: Correction! Good news, everyone! :) After doing the DEP fixes described below, AND fixing the permissions on Program Files (x86)\SpamBayes, it works fine. I'll put some change/enhancement suggestions in another thread. ---------------------------------------------------------------------- Comment By: Jamie Hanrahan () Date: 2010-04-29 09:08 Message: montanaro, danmcco - I tried making Outlook an exception for DEP in the System configuration, and also unchecked the DEP option as danmcco suggested - no help. This is with 32-bit Outlook 2010 on Windows 7 x64. ---------------------------------------------------------------------- Comment By: Skip Montanaro (montanaro) Date: 2010-03-06 01:25 Message: Does this help? http://spambayes.sourceforge.net/faq.html#id68 ---------------------------------------------------------------------- Comment By: Daniel McCormack (danmcco) Date: 2010-03-05 22:42 Message: If you Go to File...options...Trust Center... Trust Center Settings...DEP Setting and uncheck enable DEP mode it will load and work. Danmcco ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=2906094&group_id=61702 From noreply at sourceforge.net Tue Jun 22 20:03:39 2010 From: noreply at sourceforge.net (SourceForge.net) Date: Tue, 22 Jun 2010 18:03:39 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-3019753 ] 1.1a6: Python 2.6 - ImportError: No module named setuptools Message-ID: Bugs item #3019753, was opened at 2010-06-22 21:03 Message generated for change (Tracker Item Submitted) made by jaalto You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=3019753&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Jari Aalto (jaalto) Assigned to: Nobody/Anonymous (nobody) Summary: 1.1a6: Python 2.6 - ImportError: No module named setuptools Initial Comment: While building the package under Python 2.6: $ python setup.py build Traceback (most recent call last): File "setup.py", line 6, in from setuptools import setup, find_packages ImportError: No module named setuptools ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=3019753&group_id=61702 From noreply at sourceforge.net Wed Jun 23 03:07:11 2010 From: noreply at sourceforge.net (SourceForge.net) Date: Wed, 23 Jun 2010 01:07:11 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-3019753 ] 1.1a6: Python 2.6 - ImportError: No module named setuptools Message-ID: Bugs item #3019753, was opened at 2010-06-23 04:03 Message generated for change (Comment added) made by mhammond You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=3019753&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None >Status: Closed >Resolution: Invalid Priority: 5 Private: No Submitted By: Jari Aalto (jaalto) Assigned to: Nobody/Anonymous (nobody) Summary: 1.1a6: Python 2.6 - ImportError: No module named setuptools Initial Comment: While building the package under Python 2.6: $ python setup.py build Traceback (most recent call last): File "setup.py", line 6, in from setuptools import setup, find_packages ImportError: No module named setuptools ---------------------------------------------------------------------- >Comment By: Mark Hammond (mhammond) Date: 2010-06-23 11:07 Message: Unfortunately we depend on this non-standard 'setuptools' module. Fortunately many other packages do too :) Install this package and you should be good to go. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=3019753&group_id=61702