From noreply at sourceforge.net Fri Aug 1 00:21:46 2008 From: noreply at sourceforge.net (SourceForge.net) Date: Thu, 31 Jul 2008 22:21:46 +0000 Subject: [spambayes-bugs] [ spambayes-Patches-1803127 ] Fix for bsddb._db.DBAccessError: (13, 'Permission denied -- Message-ID: Patches item #1803127, was opened at 2007-09-26 18:36 Message generated for change (Comment added) made by montanaro You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498105&aid=1803127&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None >Status: Closed >Resolution: Accepted Priority: 5 Private: No Submitted By: David Abrahams (david_abrahams) >Assigned to: Skip Montanaro (montanaro) Summary: Fix for bsddb._db.DBAccessError: (13, 'Permission denied -- Initial Comment: http://article.gmane.org/gmane.mail.spam.spambayes.devel/3953 describes a problem and offers an analysis for which I am submitting a patch. This is the most conservative change I could think of. ---------------------------------------------------------------------- >Comment By: Skip Montanaro (montanaro) Date: 2008-07-31 17:21 Message: Logged In: YES user_id=44345 Originator: NO Don't know why I didn't close this awhile ago. This patch was applied on 2007-10-21. ---------------------------------------------------------------------- Comment By: David Abrahams (david_abrahams) Date: 2007-09-27 15:42 Message: Logged In: YES user_id=52572 Originator: YES The original patch was broken, sorry. I've replaced it. File Added: hammie.patch ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498105&aid=1803127&group_id=61702 From noreply at sourceforge.net Fri Aug 8 19:58:38 2008 From: noreply at sourceforge.net (SourceForge.net) Date: Fri, 08 Aug 2008 17:58:38 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-1835536 ] Office/Outlook SP3 Breaks Spambayes Message-ID: Bugs item #1835536, was opened at 2007-11-20 22:48 Message generated for change (Comment added) made by tssmith2002 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1835536&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Outlook Group: 1.0.4 Status: Open Resolution: None Priority: 5 Private: No Submitted By: Raymondg (raymondg) Assigned to: Mark Hammond (mhammond) Summary: Office/Outlook SP3 Breaks Spambayes Initial Comment: Immediately after installing Office 2003 SP3, Spambayes stopped working on Outlook 2003. Tried 1.0.4 and 1.1A. Both are disabled in Outlook. Reference MSKB article 938814 http://support.microsoft.com/?kbid=938814 Spambayes log: Loaded bayes database from 'C:\Documents and Settings\xxxxxxx\Application Data\SpamBayes\default_bayes_database.db' Loaded message database from 'C:\Documents and Settings\xxxxxxxx\Application Data\SpamBayes\default_message_database.db' Bayes database initialized with 1675 spam and 1746 good messages SpamBayes Outlook Addin Version 1.1a3 (April 2007) on Windows 5.1.2600 (Service Pack 2) using Python 2.4.4 (#71, Feb 5 2007, 15:24:39) [MSC v.1310 32 bit (Intel)] Log created Tue Nov 20 22:22:36 2007 *** SpamBayes is NOT enabled, so will not filter incoming mail. *** pythoncom error: Failed to call the universal dispatcher Traceback (most recent call last): File "win32com\universal.pyc", line 177, in dispatch File "win32com\server\policy.pyc", line 332, in _InvokeEx_ File "win32com\server\policy.pyc", line 659, in _invokeex_ File "win32com\server\policy.pyc", line 593, in _invokeex_ File "addin.pyc", line 1365, in OnStartupComplete File "win32com\client\dynamic.pyc", line 496, in __getattr__ exceptions.AttributeError: .Explorers pythoncom error: Unexpected gateway error Traceback (most recent call last): File "win32com\universal.pyc", line 177, in dispatch File "win32com\server\policy.pyc", line 332, in _InvokeEx_ File "win32com\server\policy.pyc", line 659, in _invokeex_ File "win32com\server\policy.pyc", line 593, in _invokeex_ File "addin.pyc", line 1365, in OnStartupComplete File "win32com\client\dynamic.pyc", line 496, in __getattr__ exceptions.AttributeError: .Explorers SpamBayes - Disconnecting from Outlook Session: Messages classified: 0 Total: Messages classified: 0 Addin terminating: 0 COM client and 1 COM servers exist. ---------------------------------------------------------------------- Comment By: Todd Smith (tssmith2002) Date: 2008-08-08 12:58 Message: Logged In: YES user_id=497490 Originator: NO My Spambayes install was after Outlook 2003 SP3 and WinXP SP3. The DLL registers successfully according to the Spambayes log but as soon as it starts, Outlook reports a serious error and asks to shut the Spambayes plugin down. I have followed MSKB article 938814 as well with no result. Spambayes, if active crashes Outlook. Todd Smith ---------------------------------------------------------------------- Comment By: Powernout (powernout) Date: 2008-02-25 03:44 Message: Logged In: YES user_id=1988242 Originator: NO My Spambayes is also not working the way it's supposed to. Not sure when SP3 was installed, but my symtoms are: In Junk Suspects, I can no longer use the "Delete as Spam" button, nor can I use the "Recover from Spam" button. Although junk mail is still being filtered, I am getting approximately 3 times more Junk Suspects, even email addresses which are safe go into the Junk Suspects. ---------------------------------------------------------------------- Comment By: joefidler (joefidler) Date: 2008-01-15 17:09 Message: Logged In: YES user_id=1911145 Originator: NO I am seeing same symptoms - plug-in just does not enable under Outlook 2003 with SP3. See 1811774 for details. I have not tested with another version of Outlook/SP so cannot confirm problem is specific to this service pack. Cheers, Joe. ---------------------------------------------------------------------- Comment By: Raymondg (raymondg) Date: 2007-11-21 11:26 Message: Logged In: YES user_id=1942118 Originator: YES I thought the KB article may be relevant as it mentions COM add-ins that are disabled after applying Office 2003 SP3. If that is not the case, OK, but has anyone else reported this problem, and is there a fix? Bug report 1811774 looks like similar problem (also using Outlook 2003 SP3). Spambayes toolbar buttons are there but do not respond at all when clicked. No way to delete spam or recover messages from spam. Can't run Spambayes config manager. Outlook 2K3 Toolbar options for Spambayes are grayed out. Happened immediately after installing Office 2K3 SP3. ---------------------------------------------------------------------- Comment By: Mark Hammond (mhammond) Date: 2007-11-20 23:41 Message: Logged In: YES user_id=14198 Originator: NO Is there any reason to believe MSKB article 938814 is relevant here? I can't see one. Not having an 'explorers' object would cripple things, so ignoring this error isn't really an option, and sadly I skipped 2003 and only have 2007. ---------------------------------------------------------------------- Comment By: Raymondg (raymondg) Date: 2007-11-20 23:39 Message: Logged In: YES user_id=1942118 Originator: YES Yes, I followed all of the suggestions on the troubleshooting page. Tried several times for 1.0.4 and 1.1a before posting. ---------------------------------------------------------------------- Comment By: Skip Montanaro (montanaro) Date: 2007-11-20 23:26 Message: Logged In: YES user_id=44345 Originator: NO Assigning to Mark. Have you checked the troubleshooting guide? http://spambayes.svn.sourceforge.net/viewvc/*checkout*/spambayes/trunk/spambayes/Outlook2000/docs/troubleshooting.html ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1835536&group_id=61702 From noreply at sourceforge.net Fri Aug 8 20:00:19 2008 From: noreply at sourceforge.net (SourceForge.net) Date: Fri, 08 Aug 2008 18:00:19 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-1914241 ] Ourlook crash Message-ID: Bugs item #1914241, was opened at 2008-03-14 06:41 Message generated for change (Comment added) made by tssmith2002 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1914241&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Outlook Group: 1.1.x Status: Open Resolution: None Priority: 5 Private: No Submitted By: Andrey Eroshevsky (andyero) Assigned to: Nobody/Anonymous (nobody) Summary: Ourlook crash Initial Comment: Vista Business/Outlook 2007 Install SpamBayes Run Outlook On second run Outlook ask to disable spambayes plugin DEP for Outlook is disabled User rights for ProgramFiles\SpamBayes granted log file "spambayes1.log": Loaded bayes database from 'C:\Users\AEroshevskiy\AppData\Roaming\SpamBayes\default_bayes_database.db' Loaded message database from 'C:\Users\AEroshevskiy\AppData\Roaming\SpamBayes\default_message_database.db' Bayes database initialized with 0 spam and 0 good messages SpamBayes Outlook Addin Version 1.1a3 (April 2007) on Windows 6.0.6000 () using Python 2.4.4 (#71, Feb 5 2007, 15:24:39) [MSC v.1310 32 bit (Intel)] Log created Fri Mar 14 14:15:49 2008 ERROR enumerating a receive folder - (-2147221233, 'OLE error 0x8004010f', None, None) ---------------------------------------------------------------------- Comment By: Todd Smith (tssmith2002) Date: 2008-08-08 13:00 Message: Logged In: YES user_id=497490 Originator: NO I am having the same problem with Outlook 2003 and Spambayes, but Outlook crashes right after Spambayes starts. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1914241&group_id=61702 From noreply at sourceforge.net Thu Aug 21 17:51:40 2008 From: noreply at sourceforge.net (SourceForge.net) Date: Thu, 21 Aug 2008 15:51:40 +0000 Subject: [spambayes-bugs] [ spambayes-Bugs-1622941 ] Delete as SPAM not moving message Message-ID: Bugs item #1622941, was opened at 2006-12-27 10:08 Message generated for change (Comment added) made by helpdeskdan You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1622941&group_id=61702 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Victor Roberts (vicroberts) Assigned to: Nobody/Anonymous (nobody) Summary: Delete as SPAM not moving message Initial Comment: I know this is an old problem, but I have done all the suggested fixes. I use Outlook 2000 on Windows 2000. After a few messages the Delete as SPAM button will change when clicked but the message will not move. I have deleted the SpamBayes toolbar and also deleted outcmd.dat as recommended. This fixes the problem for a day or so and then SpamBayes breaks again. I do not remember having this problem before I upgraded to 1.0.4. I have attached my most recent log file. Vic Roberts ---------------------------------------------------------------------- Comment By: Dan Schmidt (helpdeskdan) Date: 2008-08-21 11:51 Message: Logged In: YES user_id=646407 Originator: NO I am using 1.1a4 and have also found that the "spam" button does not work. However, manually moving the message to the spam folder appears to work - the Spam score changes after moving it to the spam folder. ---------------------------------------------------------------------- Comment By: Skip Montanaro (montanaro) Date: 2008-05-05 18:01 Message: Logged In: YES user_id=44345 Originator: NO Ah, wait. I just saw you had attached a log file. Your database is corrupt. I'm afraid there's nothing to be done other than delete your training database and retrain from scratch. ---------------------------------------------------------------------- Comment By: Skip Montanaro (montanaro) Date: 2008-05-05 17:58 Message: Logged In: YES user_id=44345 Originator: NO What version are you using? If you are using 1.0.4 can you try updating to 1.1a4 and let us know if that solves the problem? ---------------------------------------------------------------------- Comment By: towdesign (towdesign) Date: 2008-05-05 17:24 Message: Logged In: YES user_id=1819817 Originator: NO I am having the same exact problem - very annoying!!!! ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=498103&aid=1622941&group_id=61702