From rosuav at gmail.com Thu Dec 1 11:12:44 2016 From: rosuav at gmail.com (Chris Angelico) Date: Fri, 2 Dec 2016 03:12:44 +1100 Subject: [Python-buildbots] Buildbot: buildslave angelico-debian-amd64 was lost In-Reply-To: <3tV28N3YC7zFrWD@mail.python.org> References: <3tV28N3YC7zFrWD@mail.python.org> Message-ID: On Fri, Dec 2, 2016 at 3:01 AM, wrote: > The Buildbot working for 'Python' > has noticed that the buildslave named angelico-debian-amd64 went away > > It last disconnected at Thu Dec 1 15:01:21 2016 (buildmaster-local time) > > The admin on record (as reported by BUILDSLAVE:info/admin) > was 'Chris Angelico > '. Excellent, glad these are working. And I hadn't noticed that it had gone down, so this was very much useful. Thank you to whoever got that online. ChrisA From zachary.ware+pydev at gmail.com Thu Dec 1 11:19:17 2016 From: zachary.ware+pydev at gmail.com (Zachary Ware) Date: Thu, 1 Dec 2016 10:19:17 -0600 Subject: [Python-buildbots] Buildbot: buildslave angelico-debian-amd64 was lost In-Reply-To: References: <3tV28N3YC7zFrWD@mail.python.org> Message-ID: On Thu, Dec 1, 2016 at 10:12 AM, Chris Angelico wrote: > On Fri, Dec 2, 2016 at 3:01 AM, wrote: >> The Buildbot working for 'Python' >> has noticed that the buildslave named angelico-debian-amd64 went away >> >> It last disconnected at Thu Dec 1 15:01:21 2016 (buildmaster-local time) >> >> The admin on record (as reported by BUILDSLAVE:info/admin) >> was 'Chris Angelico >> '. > > Excellent, glad these are working. And I hadn't noticed that it had > gone down, so this was very much useful. Thank you to whoever got that > online. Glad you find it useful rather than annoying :). I managed to get that going as part of updating the master last weekend. As it turned out, all it took for that was `sudo apt-get install python-twisted-mail`, which I could swear I'd looked for before and failed to find it... -- Zach From zachary.ware at gmail.com Wed Dec 7 23:20:01 2016 From: zachary.ware at gmail.com (Zachary Ware) Date: Wed, 7 Dec 2016 22:20:01 -0600 Subject: [Python-buildbots] Git installation and roll call Message-ID: Hi all, It has come to my attention that one of our members has been trying to send mail to the list and it has been silently disappearing. To determine whether this is a widespread issue, please reply-all to this message, sending to both the list and me. I'll compare replies I receive to the archives. If you've also sent messages that were never replied to, please mention that as well. We'll also take this opportunity to ensure that all of our buildslaves have Git installed in preparation for the GitHub switchover. Please note whether Git is installed on your slave(s) in your reply. Thanks, -- Zach From koobs at FreeBSD.org Wed Dec 7 23:49:58 2016 From: koobs at FreeBSD.org (Kubilay Kocak) Date: Thu, 8 Dec 2016 15:49:58 +1100 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: <33EDA390-CAC7-471C-9A4B-3F82D442898F@FreeBSD.org> @Zach Ack. git installed (w/ curl http/https support) x 3 FreeBSD buildbot workers -- Regards, Kubilay Kocak > On 8 Dec 2016, at 3:20 PM, Zachary Ware wrote: > > Hi all, > > It has come to my attention that one of our members has been trying to > send mail to the list and it has been silently disappearing. To > determine whether this is a widespread issue, please reply-all to this > message, sending to both the list and me. I'll compare replies I > receive to the archives. If you've also sent messages that were never > replied to, please mention that as well. > > We'll also take this opportunity to ensure that all of our buildslaves > have Git installed in preparation for the GitHub switchover. Please > note whether Git is installed on your slave(s) in your reply. > > Thanks, > -- > Zach > _______________________________________________ > Python-Buildbots mailing list > Python-Buildbots at python.org > https://mail.python.org/mailman/listinfo/python-buildbots From db3l.net at gmail.com Thu Dec 8 00:00:08 2016 From: db3l.net at gmail.com (David Bolen) Date: Thu, 8 Dec 2016 00:00:08 -0500 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: Git has been installed on all of my buildslaves. And I don't believe any lost messages in the past for me. -- David On Wed, Dec 7, 2016 at 11:20 PM, Zachary Ware wrote: > Hi all, > > It has come to my attention that one of our members has been trying to > send mail to the list and it has been silently disappearing. To > determine whether this is a widespread issue, please reply-all to this > message, sending to both the list and me. I'll compare replies I > receive to the archives. If you've also sent messages that were never > replied to, please mention that as well. > > We'll also take this opportunity to ensure that all of our buildslaves > have Git installed in preparation for the GitHub switchover. Please > note whether Git is installed on your slave(s) in your reply. > > Thanks, > -- > Zach > _______________________________________________ > Python-Buildbots mailing list > Python-Buildbots at python.org > https://mail.python.org/mailman/listinfo/python-buildbots > From rosuav at gmail.com Thu Dec 8 00:07:09 2016 From: rosuav at gmail.com (Chris Angelico) Date: Thu, 8 Dec 2016 16:07:09 +1100 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: On Thu, Dec 8, 2016 at 3:20 PM, Zachary Ware wrote: > We'll also take this opportunity to ensure that all of our buildslaves > have Git installed in preparation for the GitHub switchover. Please > note whether Git is installed on your slave(s) in your reply. Wasn't previously, but it is now. ChrisA From flub at devork.be Thu Dec 8 02:34:29 2016 From: flub at devork.be (Floris Bruynooghe) Date: Thu, 8 Dec 2016 07:34:29 +0000 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: Hi, I previously tried to tell to this list that the machines hosting the bruynooghe-* buildslaves are now permanently powered down and I no longer work at the company which used to own/host them. So probably nest to remove them from the configuration. As I didn't get a reply to that and still appear on this list I'm resending this. Regards, Floris On 8 Dec 2016 4:21 a.m., "Zachary Ware" wrote: Hi all, It has come to my attention that one of our members has been trying to send mail to the list and it has been silently disappearing. To determine whether this is a widespread issue, please reply-all to this message, sending to both the list and me. I'll compare replies I receive to the archives. If you've also sent messages that were never replied to, please mention that as well. We'll also take this opportunity to ensure that all of our buildslaves have Git installed in preparation for the GitHub switchover. Please note whether Git is installed on your slave(s) in your reply. Thanks, -- Zach _______________________________________________ Python-Buildbots mailing list Python-Buildbots at python.org https://mail.python.org/mailman/listinfo/python-buildbots From dje.gcc at gmail.com Thu Dec 8 08:40:38 2016 From: dje.gcc at gmail.com (David Edelsohn) Date: Thu, 8 Dec 2016 05:40:38 -0800 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: On Wed, Dec 7, 2016 at 8:20 PM, Zachary Ware wrote: > Hi all, > > It has come to my attention that one of our members has been trying to > send mail to the list and it has been silently disappearing. To > determine whether this is a widespread issue, please reply-all to this > message, sending to both the list and me. I'll compare replies I > receive to the archives. If you've also sent messages that were never > replied to, please mention that as well. > > We'll also take this opportunity to ensure that all of our buildslaves > have Git installed in preparation for the GitHub switchover. Please > note whether Git is installed on your slave(s) in your reply. Git is installed on the AIX system. Thanks, David From zachary.ware at gmail.com Thu Dec 8 10:51:52 2016 From: zachary.ware at gmail.com (Zachary Ware) Date: Thu, 8 Dec 2016 09:51:52 -0600 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: <46383522-5277-4c5a-01be-db7adad4a495@jcea.es> References: <46383522-5277-4c5a-01be-db7adad4a495@jcea.es> Message-ID: On Thu, Dec 8, 2016 at 6:49 AM, Jesus Cea wrote: > On 08/12/16 05:20, Zachary Ware wrote: >> Hi all, >> >> It has come to my attention that one of our members has been trying to >> send mail to the list and it has been silently disappearing. To >> determine whether this is a widespread issue, please reply-all to this >> message, sending to both the list and me. I'll compare replies I >> receive to the archives. If you've also sent messages that were never >> replied to, please mention that as well. > > I have send two messages in the last week, not delivered neither visible > in the archives. This will be the third try. This is very strange. Your message was held for moderation as expected, but it seems to have disappeared after I accepted it. I've passed this issue along to postmaster. >> We'll also take this opportunity to ensure that all of our buildslaves >> have Git installed in preparation for the GitHub switchover. Please >> note whether Git is installed on your slave(s) in your reply. > > Just added "git" to the ansible recipe and redeployed. "git" available now. Thanks! -- Zach From zachary.ware at gmail.com Thu Dec 8 10:52:18 2016 From: zachary.ware at gmail.com (Zachary Ware) Date: Thu, 8 Dec 2016 09:52:18 -0600 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: References: Message-ID: On Thu, Dec 8, 2016 at 1:34 AM, Floris Bruynooghe wrote: > Hi, > > I previously tried to tell to this list that the machines hosting the > bruynooghe-* buildslaves are now permanently powered down and I no longer > work at the company which used to own/host them. So probably nest to remove > them from the configuration. As I didn't get a reply to that and still > appear on this list I'm resending this. Thanks for the heads-up, Floris. I've now removed that slave from the master. Feel free to stay subscribed or unsubscribe as you would like, but we won't kick you out just because you aren't actively running a buildslave :) -- Zach From zachary.ware+pydev at gmail.com Thu Dec 8 10:52:28 2016 From: zachary.ware+pydev at gmail.com (Zachary Ware) Date: Thu, 8 Dec 2016 09:52:28 -0600 Subject: [Python-buildbots] Git installation and roll call In-Reply-To: <20161208064721.GA39362@mail.codigo23.net> References: <20161208064721.GA39362@mail.codigo23.net> Message-ID: On Thu, Dec 8, 2016 at 12:47 AM, Francisco de Borja Lopez Rio wrote: > Yes, git is available in the openbsd -current i386 buildbot Thanks Francisco! It appears that that bot hasn't connected in quite some time, though; is there something wrong that I can help with? -- Zach From xdegaye at gmail.com Sun Dec 11 09:39:33 2016 From: xdegaye at gmail.com (Xavier de Gaye) Date: Sun, 11 Dec 2016 15:39:33 +0100 Subject: [Python-buildbots] buildbots not processing the pending requests Message-ID: Just to inform you that the buildbots seem to have mostly stopped processing the pending building requests since yesterday. Xavier From zachary.ware+pydev at gmail.com Sun Dec 11 12:30:24 2016 From: zachary.ware+pydev at gmail.com (Zachary Ware) Date: Sun, 11 Dec 2016 11:30:24 -0600 Subject: [Python-buildbots] buildbots not processing the pending requests In-Reply-To: References: Message-ID: On Sun, Dec 11, 2016 at 8:39 AM, Xavier de Gaye wrote: > Just to inform you that the buildbots seem to have mostly stopped > processing the pending building requests since yesterday. Thanks for the heads up, Xavier. This seems to coincide with the OpenIndiana bots both hanging during tests, but I don't know why that would affect the rest of the fleet or if the master was somehow responsible for those bots hanging. After a hard restart of the master, things are building again. -- Zach From xdegaye at gmail.com Sun Dec 11 14:34:02 2016 From: xdegaye at gmail.com (Xavier de Gaye) Date: Sun, 11 Dec 2016 20:34:02 +0100 Subject: [Python-buildbots] buildbots not processing the pending requests In-Reply-To: References: Message-ID: <5fb04317-8521-e038-cb41-81e1826cdbdc@gmail.com> On 12/11/2016 06:30 PM, Zachary Ware wrote: > After a hard restart of the master, things are building again. Thanks Zachary. Xavier From jcea at jcea.es Mon Dec 12 11:57:48 2016 From: jcea at jcea.es (Jesus Cea) Date: Mon, 12 Dec 2016 17:57:48 +0100 Subject: [Python-buildbots] buildbots not processing the pending requests In-Reply-To: References: Message-ID: On 11/12/16 18:30, Zachary Ware wrote: > Thanks for the heads up, Xavier. This seems to coincide with the > OpenIndiana bots both hanging during tests, but I don't know why that > would affect the rest of the fleet or if the master was somehow > responsible for those bots hanging. We are trying to diagnose what happened yesterday with openindiana buildbots. So far we are seeing tens of GB of RAM consumed. Trying to triage. -- Jes?s Cea Avi?n _/_/ _/_/_/ _/_/_/ jcea at jcea.es - http://www.jcea.es/ _/_/ _/_/ _/_/ _/_/ _/_/ Twitter: @jcea _/_/ _/_/ _/_/_/_/_/ jabber / xmpp:jcea at jabber.org _/_/ _/_/ _/_/ _/_/ _/_/ "Things are not so easy" _/_/ _/_/ _/_/ _/_/ _/_/ _/_/ "My name is Dump, Core Dump" _/_/_/ _/_/_/ _/_/ _/_/ "El amor es poner tu felicidad en la felicidad de otro" - Leibniz -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: OpenPGP digital signature URL: