[ python-Bugs-1637120 ] Python 2.5 fails to build on AIX 5.3 (xlc_r compiler)
SourceForge.net
noreply at sourceforge.net
Thu Jan 25 23:29:02 CET 2007
Bugs item #1637120, was opened at 2007-01-16 18:06
Message generated for change (Comment added) made by oirraza
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=105470&aid=1637120&group_id=5470
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Build
Group: Python 2.5
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Orlando Irrazabal (oirraza)
Assigned to: Thomas Heller (theller)
Summary: Python 2.5 fails to build on AIX 5.3 (xlc_r compiler)
Initial Comment:
Initial Comment:
Build of Python 2.5 on AIX 5.3 with xlc_r fails with the below error message.
The configure line is:
./configure --with-gcc="xlc_r -q64" --with-cxx="xlC_r -q64" --disable-ipv6 AR="ar -X64"
[...]
building '_ctypes' extension
xlc_r -q64 -DNDEBUG -O -I. -I/sw_install/python-2.5/./Include -Ibuild/temp.aix-5.3-2.5/libffi/include -Ibuild/temp.aix-5.3-2.5/libffi -I/sw_install/python-2.5/Modules/_ctypes/libffi/src -I./Include -I. -I/sw_install/python-2.5/Include -I/sw_install/python-2.5 -c /sw_install/python-2.5/Modules/_ctypes/_ctypes.c -o build/temp.aix-5.3-2.5/sw_install/python-2.5/Modules/_ctypes/_ctypes.o
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 221.3: 1506-166 (S) Definition of function ffi_closure requires parentheses.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 221.15: 1506-276 (S) Syntax error: possible missing '{'?
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 248.3: 1506-273 (E) Missing type in declaration of ffi_raw_closure.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 251.38: 1506-275 (S) Unexpected text '*' encountered.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 252.23: 1506-276 (S) Syntax error: possible missing identifier?
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 251.1: 1506-033 (S) Function ffi_prep_raw_closure is not valid. Function cannot return a function.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 251.1: 1506-282 (S) The type of the parameters must be specified in a prototype.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 254.23: 1506-275 (S) Unexpected text 'void' encountered.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 254.38: 1506-275 (S) Unexpected text ')' encountered.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 257.43: 1506-275 (S) Unexpected text '*' encountered.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 258.28: 1506-276 (S) Syntax error: possible missing identifier?
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 257.1: 1506-033 (S) Function ffi_prep_java_raw_closure is not valid. Function cannot return a function.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 257.1: 1506-282 (S) The type of the parameters must be specified in a prototype.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 260.28: 1506-275 (S) Unexpected text 'void' encountered.
"build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 260.43: 1506-275 (S) Unexpected text ')' encountered.
"/sw_install/python-2.5/Modules/_ctypes/ctypes.h", line 71.9: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/ctypes.h", line 77.26: 1506-195 (S) Integral constant expression with a value greater than zero is required.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 2804.31: 1506-068 (E) Operation between types "void*" and "int(*)(void)" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 3357.28: 1506-280 (E) Function argument assignment between types "int(*)(void)" and "void*" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 3417.42: 1506-022 (S) "pcl" is not a member of "struct {...}".
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 4749.67: 1506-280 (E) Function argument assignment between types "void*" and "void*(*)(void*,const void*,unsigned long)" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 4750.66: 1506-280 (E) Function argument assignment between types "void*" and "void*(*)(void*,int,unsigned long)" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 4751.69: 1506-280 (E) Function argument assignment between types "void*" and "struct _object*(*)(const char*,long)" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 4752.64: 1506-280 (E) Function argument assignment between types "void*" and "struct _object*(*)(void*,struct _object*,struct _object*)" is not allowed.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes.c", line 4754.70: 1506-280 (E) Function argument assignment between types "void*" and "struct _object*(*)(const unsigned int*,int)" is not allowed.
building '_ctypes_test' extension
xlc_r -q64 -DNDEBUG -O -I. -I/sw_install/python-2.5/./Include -I./Include -I. -I/sw_install/python-2.5/Include -I/sw_install/python-2.5 -c /sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c -o build/temp.aix-5.3-2.5/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.o
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 61.1: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 68.1: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 75.1: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field M must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field N must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field O must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field P must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field Q must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field R must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 320.9: 1506-009 (S) Bit-field S must be of type signed int, unsigned int or int.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 371.1: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 371.31: 1506-045 (S) Undeclared identifier get_last_tf_arg_s.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 372.1: 1506-046 (S) Syntax error.
"/sw_install/python-2.5/Modules/_ctypes/_ctypes_test.c", line 372.31: 1506-045 (S) Undeclared identifier get_last_tf_arg_u.
[...]
----------------------------------------------------------------------
>Comment By: Orlando Irrazabal (oirraza)
Date: 2007-01-25 19:29
Message:
Logged In: YES
user_id=876766
Originator: YES
This is the debug output from makesetup command (add "set -x" to
begining):
+ usage=
usage: makesetup [-s srcdir] [-l libdir] [-c config.c.in] [-m
Makefile.pre]
[Setup] ... [-n [Setup] ...]
+ srcdir=.
+ libdir=
+ config=
+ makepre=
+ noobjects=
+ doconfig=yes
+ :
+ shift
+ config=./Modules/config.c.in
+ shift
+ :
+ shift
+ srcdir=Modules
+ shift
+ :
+ break
+ + sed s,/[^/]*$,,
+ echo ./Modules/makesetup
libdir=./Modules
+ makepre=Makefile.pre
+ NL=\
+ uname -s
+ echo *doconfig*
+ cat Modules/Setup.config
+ sed -e s/[ ]*#.*// -e /^[ ]*$/d
+ rulesf=@rules.843936
+ trap rm -f $rulesf 0 1 2 3
+ echo
# Rules appended by makedepend
+ 1> @rules.843936
+ DEFS=
+ MODS=
+ SHAREDMODS=
+ OBJS=
+ LIBS=
+ LOCALLIBS=
+ BASELIBS=
+ read line
+ echo *doconfig*
+ cat Modules/Setup.local
+ echo *doconfig*
+ cat Modules/Setup
+ grep \\$
+ echo *doconfig*
+ 1> /dev/null
+ doconfig=yes
+ continue
+ read line
+ grep \\$
+ echo thread threadmodule.c
+ 1> /dev/null
+ srcs=
+ cpps=
+ libs=
+ mods=
+ skip=
+ mods= thread
+ srcs= threadmodule.c
+ LIBS=
+ MODS= thread
+ objs=
+ + basename threadmodule.c .c
obj=threadmodule.o
+ cc=$(CC)
+ obj=Modules/threadmodule.o
+ objs= Modules/threadmodule.o
+ src=$(srcdir)/Modules/threadmodule.c
+ cc=$(CC) $(PY_CFLAGS)
+ rule=Modules/threadmodule.o: $(srcdir)/Modules/threadmodule.c; $(CC)
$(PY_CFLAGS) -c $(srcdir)/Modules/threadmodule.c -o
Modules/threadmodule.o
+ echo Modules/threadmodule.o: $(srcdir)/Modules/threadmodule.c; $(CC)
$(PY_CFLAGS) -c $(srcdir)/Modules/threadmodule.c -o
Modules/threadmodule.o
+ 1>> @rules.843936
+ OBJS= Modules/threadmodule.o
+ base=threadmodule
+ file=Modules/threadmodule$(SO)
+ rule=Modules/threadmodule$(SO): Modules/threadmodule.o
+ rule=Modules/threadmodule$(SO): Modules/threadmodule.o; $(LDSHARED)
Modules/threadmodule.o -o Modules/threadmodule$(SO)
+ echo Modules/threadmodule$(SO): Modules/threadmodule.o; $(LDSHARED)
Modules/threadmodule.o -o Modules/threadmodule$(SO)
+ 1>> @rules.843936
+ read line
+ echo signal signalmodule.c
+ grep \\$
+ 1> /dev/null
+ srcs=
+ cpps=
+ libs=
+ mods=
+ skip=
+ mods= signal
+ srcs= signalmodule.c
+ LIBS=
+ MODS= thread signal
+ objs=
+ + basename signalmodule.c .c
obj=signalmodule.o
+ cc=$(CC)
+ obj=Modules/signalmodule.o
+ objs= Modules/signalmodule.o
+ src=$(srcdir)/Modules/signalmodule.c
+ cc=$(CC) $(PY_CFLAGS)
+ rule=Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c; $(CC)
$(PY_CFLAGS) -c $(srcdir)/Modules/signalmodule.c -o
Modules/signalmodule.o
+ echo Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c; $(CC)
$(PY_CFLAGS) -c $(srcdir)/Modules/signalmodule.c -o
Modules/signalmodule.o
+ 1>> @rules.843936
+ OBJS= Modules/threadmodule.o Modules/signalmodule.o
+ base=signalmodule
+ file=Modules/signalmodule$(SO)
+ rule=Modules/signalmodule$(SO): Modules/signalmodule.o
+ rule=Modules/signalmodule$(SO): Modules/signalmodule.o; $(LDSHARED)
Modules/signalmodule.o -o Modules/signalmodule$(SO)
+ echo Modules/signalmodule$(SO): Modules/signalmodule.o; $(LDSHARED)
Modules/signalmodule.o -o Modules/signalmodule$(SO)
+ 1>> @rules.843936
+ read line
+ grep \\$
+ echo *doconfig*
+ 1> /dev/null
+ doconfig=yes
+ continue
+ read line
+ grep \\$
+ echo *doconfig*
+ 1> /dev/null
+ doconfig=yes
+ continue
+ read line
+ grep \\$
+ echo
+ 1> /dev/null
+ srcs=
+ cpps=
+ libs=
+ mods=
+ skip=
in ho bad word
+ 1>& 2
in word
+ exit 1
+ rm -f @rules.843936
----------------------------------------------------------------------
Comment By: Martin v. Löwis (loewis)
Date: 2007-01-25 18:07
Message:
Logged In: YES
user_id=21627
Originator: NO
That should have worked. Can you please debug the build process yourself a
bit. It will be very tedious to communicate individual commands, then wait
a day, communicate the next command.
Start looking at the command immediately before the mv. It should have
been a "makesetup" invocation, which should have produced config.c which it
then tried to move.
----------------------------------------------------------------------
Comment By: Orlando Irrazabal (oirraza)
Date: 2007-01-25 11:13
Message:
Logged In: YES
user_id=876766
Originator: YES
I downloaded with eclipse (subclipse addin) and then ftp to my aix
machine. It's this ok?
----------------------------------------------------------------------
Comment By: Martin v. Löwis (loewis)
Date: 2007-01-25 03:20
Message:
Logged In: YES
user_id=21627
Originator: NO
oirraza: when you say "I downloaded", what precisely do you mean? The only
sensible way of downloading it is through subversion checkout, i.e. "svn co
http:...".
----------------------------------------------------------------------
Comment By: Orlando Irrazabal (oirraza)
Date: 2007-01-24 21:08
Message:
Logged In: YES
user_id=876766
Originator: YES
Thomas, i downloaded the subversion maintenance branch from
http://svn.python.org/projects/python/branches/release25-maint/
but when i run ./configure
fails with the below error message
[...]
mv: cannot rename config.c to Modules/config.c:
No such file or directory
----------------------------------------------------------------------
Comment By: Thomas Heller (theller)
Date: 2007-01-24 18:00
Message:
Logged In: YES
user_id=11105
Originator: NO
There seem to be three separate compilation errors:
1. (build/temp.aix-5.3-2.5/libffi/include/ffi.h", line 221.3: 1506-166 (S)
Definition of function ffi_closure requires parentheses)
>This looks like the compile does not understand the
__attribute__((...)) syntax.
2. In _ctypes_test.c, lines 61/68/75: The source uses C++ comments
instead of C comments.
3. The compiler does not seem to support bit fields in structures with
type 'short'.
For issue 1: oirraza, can you try the compilation with
'__attribute__((...))' removed?
Issue 2: is fixed now in SVN.
Issue 3: Hm, I don't actually know how to approach this.
----------------------------------------------------------------------
Comment By: Martin v. Löwis (loewis)
Date: 2007-01-18 17:02
Message:
Logged In: YES
user_id=21627
Originator: NO
oirraza, can you please try the subversion maintenance branch for Python
2.5 instead and report whether the bug has there? It is at
http://svn.python.org/projects/python/branches/release25-maint/
Thomas, can you please take a look at this? If not, unassign.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=105470&aid=1637120&group_id=5470
More information about the Python-bugs-list
mailing list