"hashlib" — Secure hashes and message digests
*********************************************

**Source code:** Lib/hashlib.py

======================================================================

This module implements a common interface to many different secure
hash and message digest algorithms.  Included are the FIPS secure hash
algorithms SHA1, SHA224, SHA256, SHA384, SHA512, (defined in the FIPS
180-4 standard), the SHA-3 series (defined in the FIPS 202 standard)
as well as RSA’s MD5 algorithm (defined in internet **RFC 1321**).
The terms “secure hash” and “message digest” are interchangeable.
Older algorithms were called message digests.  The modern term is
secure hash.

Note:

  If you want the adler32 or crc32 hash functions, they are available
  in the "zlib" module.


Hash algorithms
===============

There is one constructor method named for each type of *hash*.  All
return a hash object with the same simple interface. For example: use
"sha256()" to create a SHA-256 hash object. You can now feed this
object with *bytes-like objects* (normally "bytes") using the "update"
method.  At any point you can ask it for the *digest* of the
concatenation of the data fed to it so far using the "digest()" or
"hexdigest()" methods.

To allow multithreading, the Python *GIL* is released while computing
a hash supplied more than 2047 bytes of data at once in its
constructor or ".update" method.

Constructors for hash algorithms that are always present in this
module are "sha1()", "sha224()", "sha256()", "sha384()", "sha512()",
"sha3_224()", "sha3_256()", "sha3_384()", "sha3_512()", "shake_128()",
"shake_256()", "blake2b()", and "blake2s()". "md5()" is normally
available as well, though it may be missing or blocked if you are
using a rare “FIPS compliant” build of Python. These correspond to
"algorithms_guaranteed".

Additional algorithms may also be available if your Python
distribution’s "hashlib" was linked against a build of OpenSSL that
provides others. Others *are not guaranteed available* on all
installations and will only be accessible by name via "new()".  See
"algorithms_available".

Warning:

  Some algorithms have known hash collision weaknesses (including MD5
  and SHA1). Refer to Attacks on cryptographic hash algorithms and the
  hashlib-seealso section at the end of this document.

New in version 3.6: SHA3 (Keccak) and SHAKE constructors "sha3_224()",
"sha3_256()", "sha3_384()", "sha3_512()", "shake_128()", "shake_256()"
were added. "blake2b()" and "blake2s()" were added.

Changed in version 3.9: All hashlib constructors take a keyword-only
argument *usedforsecurity* with default value "True". A false value
allows the use of insecure and blocked hashing algorithms in
restricted environments. "False" indicates that the hashing algorithm
is not used in a security context, e.g. as a non-cryptographic one-way
compression function.

Changed in version 3.9: Hashlib now uses SHA3 and SHAKE from OpenSSL
if it provides it.


Usage
=====

To obtain the digest of the byte string "b"Nobody inspects the
spammish repetition"":

   >>> import hashlib
   >>> m = hashlib.sha256()
   >>> m.update(b"Nobody inspects")
   >>> m.update(b" the spammish repetition")
   >>> m.digest()
   b'\x03\x1e\xdd}Ae\x15\x93\xc5\xfe\\\x00o\xa5u+7\xfd\xdf\xf7\xbcN\x84:\xa6\xaf\x0c\x95\x0fK\x94\x06'
   >>> m.hexdigest()
   '031edd7d41651593c5fe5c006fa5752b37fddff7bc4e843aa6af0c950f4b9406'

More condensed:

>>> hashlib.sha256(b"Nobody inspects the spammish repetition").hexdigest()
'031edd7d41651593c5fe5c006fa5752b37fddff7bc4e843aa6af0c950f4b9406'


Constructors
============

hashlib.new(name, [data, ]*, usedforsecurity=True)

   Is a generic constructor that takes the string *name* of the
   desired algorithm as its first parameter.  It also exists to allow
   access to the above listed hashes as well as any other algorithms
   that your OpenSSL library may offer.

Using "new()" with an algorithm name:

>>> h = hashlib.new('sha256')
>>> h.update(b"Nobody inspects the spammish repetition")
>>> h.hexdigest()
'031edd7d41651593c5fe5c006fa5752b37fddff7bc4e843aa6af0c950f4b9406'

hashlib.md5([data, ]*, usedforsecurity=True)

hashlib.sha1([data, ]*, usedforsecurity=True)

hashlib.sha224([data, ]*, usedforsecurity=True)

hashlib.sha256([data, ]*, usedforsecurity=True)

hashlib.sha384([data, ]*, usedforsecurity=True)

hashlib.sha512([data, ]*, usedforsecurity=True)

hashlib.sha3_224([data, ]*, usedforsecurity=True)

hashlib.sha3_256([data, ]*, usedforsecurity=True)

hashlib.sha3_384([data, ]*, usedforsecurity=True)

hashlib.sha3_512([data, ]*, usedforsecurity=True)

Named constructors such as these are faster than passing an algorithm
name to "new()".


Attributes
==========

Hashlib provides the following constant module attributes:

hashlib.algorithms_guaranteed

   A set containing the names of the hash algorithms guaranteed to be
   supported by this module on all platforms.  Note that ‘md5’ is in
   this list despite some upstream vendors offering an odd “FIPS
   compliant” Python build that excludes it.

   New in version 3.2.

hashlib.algorithms_available

   A set containing the names of the hash algorithms that are
   available in the running Python interpreter.  These names will be
   recognized when passed to "new()".  "algorithms_guaranteed" will
   always be a subset.  The same algorithm may appear multiple times
   in this set under different names (thanks to OpenSSL).

   New in version 3.2.


Hash Objects
============

The following values are provided as constant attributes of the hash
objects returned by the constructors:

hash.digest_size

   The size of the resulting hash in bytes.

hash.block_size

   The internal block size of the hash algorithm in bytes.

A hash object has the following attributes:

hash.name

   The canonical name of this hash, always lowercase and always
   suitable as a parameter to "new()" to create another hash of this
   type.

   Changed in version 3.4: The name attribute has been present in
   CPython since its inception, but until Python 3.4 was not formally
   specified, so may not exist on some platforms.

A hash object has the following methods:

hash.update(data)

   Update the hash object with the *bytes-like object*. Repeated calls
   are equivalent to a single call with the concatenation of all the
   arguments: "m.update(a); m.update(b)" is equivalent to
   "m.update(a+b)".

   Changed in version 3.1: The Python GIL is released to allow other
   threads to run while hash updates on data larger than 2047 bytes is
   taking place when using hash algorithms supplied by OpenSSL.

hash.digest()

   Return the digest of the data passed to the "update()" method so
   far. This is a bytes object of size "digest_size" which may contain
   bytes in the whole range from 0 to 255.

hash.hexdigest()

   Like "digest()" except the digest is returned as a string object of
   double length, containing only hexadecimal digits.  This may be
   used to exchange the value safely in email or other non-binary
   environments.

hash.copy()

   Return a copy (“clone”) of the hash object.  This can be used to
   efficiently compute the digests of data sharing a common initial
   substring.


SHAKE variable length digests
=============================

hashlib.shake_128([data, ]*, usedforsecurity=True)

hashlib.shake_256([data, ]*, usedforsecurity=True)

The "shake_128()" and "shake_256()" algorithms provide variable length
digests with length_in_bits//2 up to 128 or 256 bits of security. As
such, their digest methods require a length. Maximum length is not
limited by the SHAKE algorithm.

shake.digest(length)

   Return the digest of the data passed to the "update()" method so
   far. This is a bytes object of size *length* which may contain
   bytes in the whole range from 0 to 255.

shake.hexdigest(length)

   Like "digest()" except the digest is returned as a string object of
   double length, containing only hexadecimal digits.  This may be
   used to exchange the value in email or other non-binary
   environments.

Example use:

>>> h = hashlib.shake_256(b'Nobody inspects the spammish repetition')
>>> h.hexdigest(20)
'44709d6fcb83d92a76dcb0b668c98e1b1d3dafe7'


File hashing
============

The hashlib module provides a helper function for efficient hashing of
a file or file-like object.

hashlib.file_digest(fileobj, digest, /)

   Return a digest object that has been updated with contents of file
   object.

   *fileobj* must be a file-like object opened for reading in binary
   mode. It accepts file objects from  builtin "open()", "BytesIO"
   instances, SocketIO objects from "socket.socket.makefile()", and
   similar. The function may bypass Python’s I/O and use the file
   descriptor from "fileno()" directly. *fileobj* must be assumed to
   be in an unknown state after this function returns or raises. It is
   up to the caller to close *fileobj*.

   *digest* must either be a hash algorithm name as a *str*, a hash
   constructor, or a callable that returns a hash object.

   Example:

   >>> import io, hashlib, hmac
   >>> with open(hashlib.__file__, "rb") as f:
   ...     digest = hashlib.file_digest(f, "sha256")
   ...
   >>> digest.hexdigest()  
   '...'

   >>> buf = io.BytesIO(b"somedata")
   >>> mac1 = hmac.HMAC(b"key", digestmod=hashlib.sha512)
   >>> digest = hashlib.file_digest(buf, lambda: mac1)

   >>> digest is mac1
   True
   >>> mac2 = hmac.HMAC(b"key", b"somedata", digestmod=hashlib.sha512)
   >>> mac1.digest() == mac2.digest()
   True

   New in version 3.11.


Key derivation
==============

Key derivation and key stretching algorithms are designed for secure
password hashing. Naive algorithms such as "sha1(password)" are not
resistant against brute-force attacks. A good password hashing
function must be tunable, slow, and include a salt.

hashlib.pbkdf2_hmac(hash_name, password, salt, iterations, dklen=None)

   The function provides PKCS#5 password-based key derivation function
   2. It uses HMAC as pseudorandom function.

   The string *hash_name* is the desired name of the hash digest
   algorithm for HMAC, e.g. ‘sha1’ or ‘sha256’. *password* and *salt*
   are interpreted as buffers of bytes. Applications and libraries
   should limit *password* to a sensible length (e.g. 1024). *salt*
   should be about 16 or more bytes from a proper source, e.g.
   "os.urandom()".

   The number of *iterations* should be chosen based on the hash
   algorithm and computing power. As of 2022, hundreds of thousands of
   iterations of SHA-256 are suggested. For rationale as to why and
   how to choose what is best for your application, read *Appendix
   A.2.2* of NIST-SP-800-132. The answers on the stackexchange pbkdf2
   iterations question explain in detail.

   *dklen* is the length of the derived key. If *dklen* is "None" then
   the digest size of the hash algorithm *hash_name* is used, e.g. 64
   for SHA-512.

   >>> from hashlib import pbkdf2_hmac
   >>> our_app_iters = 500_000  # Application specific, read above.
   >>> dk = pbkdf2_hmac('sha256', b'password', b'bad salt'*2, our_app_iters)
   >>> dk.hex()
   '15530bba69924174860db778f2c6f8104d3aaf9d26241840c8c4a641c8d000a9'

   New in version 3.4.

   Note:

     A fast implementation of *pbkdf2_hmac* is available with OpenSSL.
     The Python implementation uses an inline version of "hmac". It is
     about three times slower and doesn’t release the GIL.

   Deprecated since version 3.10: Slow Python implementation of
   *pbkdf2_hmac* is deprecated. In the future the function will only
   be available when Python is compiled with OpenSSL.

hashlib.scrypt(password, *, salt, n, r, p, maxmem=0, dklen=64)

   The function provides scrypt password-based key derivation function
   as defined in **RFC 7914**.

   *password* and *salt* must be *bytes-like objects*.  Applications
   and libraries should limit *password* to a sensible length (e.g.
   1024).  *salt* should be about 16 or more bytes from a proper
   source, e.g. "os.urandom()".

   *n* is the CPU/Memory cost factor, *r* the block size, *p*
   parallelization factor and *maxmem* limits memory (OpenSSL 1.1.0
   defaults to 32 MiB). *dklen* is the length of the derived key.

   New in version 3.6.


BLAKE2
======

BLAKE2 is a cryptographic hash function defined in **RFC 7693** that
comes in two flavors:

* **BLAKE2b**, optimized for 64-bit platforms and produces digests of
  any size between 1 and 64 bytes,

* **BLAKE2s**, optimized for 8- to 32-bit platforms and produces
  digests of any size between 1 and 32 bytes.

BLAKE2 supports **keyed mode** (a faster and simpler replacement for
HMAC), **salted hashing**, **personalization**, and **tree hashing**.

Hash objects from this module follow the API of standard library’s
"hashlib" objects.


Creating hash objects
---------------------

New hash objects are created by calling constructor functions:

hashlib.blake2b(data=b'', *, digest_size=64, key=b'', salt=b'', person=b'', fanout=1, depth=1, leaf_size=0, node_offset=0, node_depth=0, inner_size=0, last_node=False, usedforsecurity=True)

hashlib.blake2s(data=b'', *, digest_size=32, key=b'', salt=b'', person=b'', fanout=1, depth=1, leaf_size=0, node_offset=0, node_depth=0, inner_size=0, last_node=False, usedforsecurity=True)

These functions return the corresponding hash objects for calculating
BLAKE2b or BLAKE2s. They optionally take these general parameters:

* *data*: initial chunk of data to hash, which must be *bytes-like
  object*.  It can be passed only as positional argument.

* *digest_size*: size of output digest in bytes.

* *key*: key for keyed hashing (up to 64 bytes for BLAKE2b, up to 32
  bytes for BLAKE2s).

* *salt*: salt for randomized hashing (up to 16 bytes for BLAKE2b, up
  to 8 bytes for BLAKE2s).

* *person*: personalization string (up to 16 bytes for BLAKE2b, up to
  8 bytes for BLAKE2s).

The following table shows limits for general parameters (in bytes):

+---------+-------------+----------+-----------+-------------+
| Hash    | digest_size | len(key) | len(salt) | len(person) |
|=========|=============|==========|===========|=============|
| BLAKE2b | 64          | 64       | 16        | 16          |
+---------+-------------+----------+-----------+-------------+
| BLAKE2s | 32          | 32       | 8         | 8           |
+---------+-------------+----------+-----------+-------------+

Note:

  BLAKE2 specification defines constant lengths for salt and
  personalization parameters, however, for convenience, this
  implementation accepts byte strings of any size up to the specified
  length. If the length of the parameter is less than specified, it is
  padded with zeros, thus, for example, "b'salt'" and "b'salt\x00'" is
  the same value. (This is not the case for *key*.)

These sizes are available as module constants described below.

Constructor functions also accept the following tree hashing
parameters:

* *fanout*: fanout (0 to 255, 0 if unlimited, 1 in sequential mode).

* *depth*: maximal depth of tree (1 to 255, 255 if unlimited, 1 in
  sequential mode).

* *leaf_size*: maximal byte length of leaf (0 to "2**32-1", 0 if
  unlimited or in sequential mode).

* *node_offset*: node offset (0 to "2**64-1" for BLAKE2b, 0 to
  "2**48-1" for BLAKE2s, 0 for the first, leftmost, leaf, or in
  sequential mode).

* *node_depth*: node depth (0 to 255, 0 for leaves, or in sequential
  mode).

* *inner_size*: inner digest size (0 to 64 for BLAKE2b, 0 to 32 for
  BLAKE2s, 0 in sequential mode).

* *last_node*: boolean indicating whether the processed node is the
  last one ("False" for sequential mode).

   [image: Explanation of tree mode parameters.][image]

See section 2.10 in BLAKE2 specification for comprehensive review of
tree hashing.


Constants
---------

blake2b.SALT_SIZE

blake2s.SALT_SIZE

Salt length (maximum length accepted by constructors).

blake2b.PERSON_SIZE

blake2s.PERSON_SIZE

Personalization string length (maximum length accepted by
constructors).

blake2b.MAX_KEY_SIZE

blake2s.MAX_KEY_SIZE

Maximum key size.

blake2b.MAX_DIGEST_SIZE

blake2s.MAX_DIGEST_SIZE

Maximum digest size that the hash function can output.


Examples
--------


Simple hashing
~~~~~~~~~~~~~~

To calculate hash of some data, you should first construct a hash
object by calling the appropriate constructor function ("blake2b()" or
"blake2s()"), then update it with the data by calling "update()" on
the object, and, finally, get the digest out of the object by calling
"digest()" (or "hexdigest()" for hex-encoded string).

>>> from hashlib import blake2b
>>> h = blake2b()
>>> h.update(b'Hello world')
>>> h.hexdigest()
'6ff843ba685842aa82031d3f53c48b66326df7639a63d128974c5c14f31a0f33343a8c65551134ed1ae0f2b0dd2bb495dc81039e3eeb0aa1bb0388bbeac29183'

As a shortcut, you can pass the first chunk of data to update directly
to the constructor as the positional argument:

>>> from hashlib import blake2b
>>> blake2b(b'Hello world').hexdigest()
'6ff843ba685842aa82031d3f53c48b66326df7639a63d128974c5c14f31a0f33343a8c65551134ed1ae0f2b0dd2bb495dc81039e3eeb0aa1bb0388bbeac29183'

You can call "hash.update()" as many times as you need to iteratively
update the hash:

>>> from hashlib import blake2b
>>> items = [b'Hello', b' ', b'world']
>>> h = blake2b()
>>> for item in items:
...     h.update(item)
>>> h.hexdigest()
'6ff843ba685842aa82031d3f53c48b66326df7639a63d128974c5c14f31a0f33343a8c65551134ed1ae0f2b0dd2bb495dc81039e3eeb0aa1bb0388bbeac29183'


Using different digest sizes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

BLAKE2 has configurable size of digests up to 64 bytes for BLAKE2b and
up to 32 bytes for BLAKE2s. For example, to replace SHA-1 with BLAKE2b
without changing the size of output, we can tell BLAKE2b to produce
20-byte digests:

>>> from hashlib import blake2b
>>> h = blake2b(digest_size=20)
>>> h.update(b'Replacing SHA1 with the more secure function')
>>> h.hexdigest()
'd24f26cf8de66472d58d4e1b1774b4c9158b1f4c'
>>> h.digest_size
20
>>> len(h.digest())
20

Hash objects with different digest sizes have completely different
outputs (shorter hashes are *not* prefixes of longer hashes); BLAKE2b
and BLAKE2s produce different outputs even if the output length is the
same:

>>> from hashlib import blake2b, blake2s
>>> blake2b(digest_size=10).hexdigest()
'6fa1d8fcfd719046d762'
>>> blake2b(digest_size=11).hexdigest()
'eb6ec15daf9546254f0809'
>>> blake2s(digest_size=10).hexdigest()
'1bf21a98c78a1c376ae9'
>>> blake2s(digest_size=11).hexdigest()
'567004bf96e4a25773ebf4'


Keyed hashing
~~~~~~~~~~~~~

Keyed hashing can be used for authentication as a faster and simpler
replacement for Hash-based message authentication code (HMAC). BLAKE2
can be securely used in prefix-MAC mode thanks to the
indifferentiability property inherited from BLAKE.

This example shows how to get a (hex-encoded) 128-bit authentication
code for message "b'message data'" with key "b'pseudorandom key'":

   >>> from hashlib import blake2b
   >>> h = blake2b(key=b'pseudorandom key', digest_size=16)
   >>> h.update(b'message data')
   >>> h.hexdigest()
   '3d363ff7401e02026f4a4687d4863ced'

As a practical example, a web application can symmetrically sign
cookies sent to users and later verify them to make sure they weren’t
tampered with:

   >>> from hashlib import blake2b
   >>> from hmac import compare_digest
   >>>
   >>> SECRET_KEY = b'pseudorandomly generated server secret key'
   >>> AUTH_SIZE = 16
   >>>
   >>> def sign(cookie):
   ...     h = blake2b(digest_size=AUTH_SIZE, key=SECRET_KEY)
   ...     h.update(cookie)
   ...     return h.hexdigest().encode('utf-8')
   >>>
   >>> def verify(cookie, sig):
   ...     good_sig = sign(cookie)
   ...     return compare_digest(good_sig, sig)
   >>>
   >>> cookie = b'user-alice'
   >>> sig = sign(cookie)
   >>> print("{0},{1}".format(cookie.decode('utf-8'), sig))
   user-alice,b'43b3c982cf697e0c5ab22172d1ca7421'
   >>> verify(cookie, sig)
   True
   >>> verify(b'user-bob', sig)
   False
   >>> verify(cookie, b'0102030405060708090a0b0c0d0e0f00')
   False

Even though there’s a native keyed hashing mode, BLAKE2 can, of
course, be used in HMAC construction with "hmac" module:

   >>> import hmac, hashlib
   >>> m = hmac.new(b'secret key', digestmod=hashlib.blake2s)
   >>> m.update(b'message')
   >>> m.hexdigest()
   'e3c8102868d28b5ff85fc35dda07329970d1a01e273c37481326fe0c861c8142'


Randomized hashing
~~~~~~~~~~~~~~~~~~

By setting *salt* parameter users can introduce randomization to the
hash function. Randomized hashing is useful for protecting against
collision attacks on the hash function used in digital signatures.

   Randomized hashing is designed for situations where one party, the
   message preparer, generates all or part of a message to be signed
   by a second party, the message signer. If the message preparer is
   able to find cryptographic hash function collisions (i.e., two
   messages producing the same hash value), then they might prepare
   meaningful versions of the message that would produce the same hash
   value and digital signature, but with different results (e.g.,
   transferring $1,000,000 to an account, rather than $10).
   Cryptographic hash functions have been designed with collision
   resistance as a major goal, but the current concentration on
   attacking cryptographic hash functions may result in a given
   cryptographic hash function providing less collision resistance
   than expected. Randomized hashing offers the signer additional
   protection by reducing the likelihood that a preparer can generate
   two or more messages that ultimately yield the same hash value
   during the digital signature generation process — even if it is
   practical to find collisions for the hash function. However, the
   use of randomized hashing may reduce the amount of security
   provided by a digital signature when all portions of the message
   are prepared by the signer.

   (NIST SP-800-106 “Randomized Hashing for Digital Signatures”)

In BLAKE2 the salt is processed as a one-time input to the hash
function during initialization, rather than as an input to each
compression function.

Warning:

  *Salted hashing* (or just hashing) with BLAKE2 or any other general-
  purpose cryptographic hash function, such as SHA-256, is not
  suitable for hashing passwords.  See BLAKE2 FAQ for more
  information.

>>> import os
>>> from hashlib import blake2b
>>> msg = b'some message'
>>> # Calculate the first hash with a random salt.
>>> salt1 = os.urandom(blake2b.SALT_SIZE)
>>> h1 = blake2b(salt=salt1)
>>> h1.update(msg)
>>> # Calculate the second hash with a different random salt.
>>> salt2 = os.urandom(blake2b.SALT_SIZE)
>>> h2 = blake2b(salt=salt2)
>>> h2.update(msg)
>>> # The digests are different.
>>> h1.digest() != h2.digest()
True


Personalization
~~~~~~~~~~~~~~~

Sometimes it is useful to force hash function to produce different
digests for the same input for different purposes. Quoting the authors
of the Skein hash function:

   We recommend that all application designers seriously consider
   doing this; we have seen many protocols where a hash that is
   computed in one part of the protocol can be used in an entirely
   different part because two hash computations were done on similar
   or related data, and the attacker can force the application to make
   the hash inputs the same. Personalizing each hash function used in
   the protocol summarily stops this type of attack.

   (The Skein Hash Function Family, p. 21)

BLAKE2 can be personalized by passing bytes to the *person* argument:

   >>> from hashlib import blake2b
   >>> FILES_HASH_PERSON = b'MyApp Files Hash'
   >>> BLOCK_HASH_PERSON = b'MyApp Block Hash'
   >>> h = blake2b(digest_size=32, person=FILES_HASH_PERSON)
   >>> h.update(b'the same content')
   >>> h.hexdigest()
   '20d9cd024d4fb086aae819a1432dd2466de12947831b75c5a30cf2676095d3b4'
   >>> h = blake2b(digest_size=32, person=BLOCK_HASH_PERSON)
   >>> h.update(b'the same content')
   >>> h.hexdigest()
   'cf68fb5761b9c44e7878bfb2c4c9aea52264a80b75005e65619778de59f383a3'

Personalization together with the keyed mode can also be used to
derive different keys from a single one.

>>> from hashlib import blake2s
>>> from base64 import b64decode, b64encode
>>> orig_key = b64decode(b'Rm5EPJai72qcK3RGBpW3vPNfZy5OZothY+kHY6h21KM=')
>>> enc_key = blake2s(key=orig_key, person=b'kEncrypt').digest()
>>> mac_key = blake2s(key=orig_key, person=b'kMAC').digest()
>>> print(b64encode(enc_key).decode('utf-8'))
rbPb15S/Z9t+agffno5wuhB77VbRi6F9Iv2qIxU7WHw=
>>> print(b64encode(mac_key).decode('utf-8'))
G9GtHFE1YluXY1zWPlYk1e/nWfu0WSEb0KRcjhDeP/o=


Tree mode
~~~~~~~~~

Here’s an example of hashing a minimal tree with two leaf nodes:

     10
    /  \
   00  01

This example uses 64-byte internal digests, and returns the 32-byte
final digest:

   >>> from hashlib import blake2b
   >>>
   >>> FANOUT = 2
   >>> DEPTH = 2
   >>> LEAF_SIZE = 4096
   >>> INNER_SIZE = 64
   >>>
   >>> buf = bytearray(6000)
   >>>
   >>> # Left leaf
   ... h00 = blake2b(buf[0:LEAF_SIZE], fanout=FANOUT, depth=DEPTH,
   ...               leaf_size=LEAF_SIZE, inner_size=INNER_SIZE,
   ...               node_offset=0, node_depth=0, last_node=False)
   >>> # Right leaf
   ... h01 = blake2b(buf[LEAF_SIZE:], fanout=FANOUT, depth=DEPTH,
   ...               leaf_size=LEAF_SIZE, inner_size=INNER_SIZE,
   ...               node_offset=1, node_depth=0, last_node=True)
   >>> # Root node
   ... h10 = blake2b(digest_size=32, fanout=FANOUT, depth=DEPTH,
   ...               leaf_size=LEAF_SIZE, inner_size=INNER_SIZE,
   ...               node_offset=0, node_depth=1, last_node=True)
   >>> h10.update(h00.digest())
   >>> h10.update(h01.digest())
   >>> h10.hexdigest()
   '3ad2a9b37c6070e374c7a8c508fe20ca86b6ed54e286e93a0318e95e881db5aa'


Credits
-------

BLAKE2 was designed by *Jean-Philippe Aumasson*, *Samuel Neves*,
*Zooko Wilcox-O’Hearn*, and *Christian Winnerlein* based on SHA-3
finalist BLAKE created by *Jean-Philippe Aumasson*, *Luca Henzen*,
*Willi Meier*, and *Raphael C.-W. Phan*.

It uses core algorithm from ChaCha cipher designed by *Daniel J.
Bernstein*.

The stdlib implementation is based on pyblake2 module. It was written
by *Dmitry Chestnykh* based on C implementation written by *Samuel
Neves*. The documentation was copied from pyblake2 and written by
*Dmitry Chestnykh*.

The C code was partly rewritten for Python by *Christian Heimes*.

The following public domain dedication applies for both C hash
function implementation, extension code, and this documentation:

   To the extent possible under law, the author(s) have dedicated all
   copyright and related and neighboring rights to this software to
   the public domain worldwide. This software is distributed without
   any warranty.

   You should have received a copy of the CC0 Public Domain Dedication
   along with this software. If not, see
   https://creativecommons.org/publicdomain/zero/1.0/.

The following people have helped with development or contributed their
changes to the project and the public domain according to the Creative
Commons Public Domain Dedication 1.0 Universal:

* *Alexandr Sokolovskiy*

See also:

  Module "hmac"
     A module to generate message authentication codes using hashes.

  Module "base64"
     Another way to encode binary hashes for non-binary environments.

  https://nvlpubs.nist.gov/nistpubs/fips/nist.fips.180-4.pdf
     The FIPS 180-4 publication on Secure Hash Algorithms.

  https://csrc.nist.gov/publications/detail/fips/202/final
     The FIPS 202 publication on the SHA-3 Standard.

  https://www.blake2.net/
     Official BLAKE2 website.

  https://en.wikipedia.org/wiki/Cryptographic_hash_function
     Wikipedia article with information on which algorithms have known
     issues and what that means regarding their use.

  https://www.ietf.org/rfc/rfc8018.txt
     PKCS #5: Password-Based Cryptography Specification Version 2.1

  https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication8
  00-132.pdf
     NIST Recommendation for Password-Based Key Derivation.
