[spambayes-bugs] [ spambayes-Bugs-881739 ] error initializing the
SpamBayes addin
SourceForge.net
noreply at sourceforge.net
Wed Mar 17 12:12:53 EST 2004
Bugs item #881739, was opened at 2004-01-21 21:40
Message generated for change (Comment added) made by stu_bloke
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=498103&aid=881739&group_id=61702
Category: Outlook
Group: Outlook 008
Status: Open
Resolution: None
Priority: 5
Submitted By: Sean Kelly (mrkelly)
Assigned to: Mark Hammond (mhammond)
Summary: error initializing the SpamBayes addin
Initial Comment:
Outlook Plugin 008.1 installed on two Windows 2000 Pro
systems with SP2 using Outlook 2000 SP1. Both
connected to the same Exchange 2000 server. One
installation works fine. The other generates the
following error at Outlook startup: "There was an error
initializing the SpamBayes addin. Please restart and try
again."
I have uninstalled and reinstalled several times with the
same result. I have searched the bug reports, but can't
find the same log error. Log is attached.
----------------------------------------------------------------------
Comment By: Stuart Carter (stu_bloke)
Date: 2004-03-17 17:12
Message:
Logged In: YES
user_id=980433
Thanks wolfram, I did the same and can now start outlook
without 1.09 reporting an error. However, it does not like my
old configuration data (can't find the designated
Inbox/Junk/Suspect folders). But hey!
Thanks
----------------------------------------------------------------------
Comment By: Wolfram Kuss (wolfram_kuss)
Date: 2004-03-17 11:49
Message:
Logged In: YES
user_id=2120
I had the same problem on WinXp, no Outlook (Express)
installed. I searched the computer for the dll
(pythoncom23.dll) and found two, one in the SpamBayes folder
and one in the windows\system32. They were different size
and date. I copied the SpamBayes one over the other one
after making a backup. The error message no longer appears.
----------------------------------------------------------------------
Comment By: Robert Lilly (rclilly)
Date: 2004-03-15 10:47
Message:
Logged In: YES
user_id=346237
Has any progress been made on this problem yet? I had the
exact same problem on my system: Windows 2000 Pro, SP4;
Outlook 2000 SR3.
I uninstalled and went back to using 1.0a7/0.81. I would
like to upgrade to 1.0a9/0.9 but can't until this issure is
resolved.
Funny thing though, I installed .9 on my daughter's laptop
that has the exact same setup as my desktop and it works
just fine. Hmm!
----------------------------------------------------------------------
Comment By: Daren Thomas (darenthomas)
Date: 2004-03-01 12:09
Message:
Logged In: YES
user_id=987722
I have the same problem after upgrading to 1.09a. Can't
downgrade because I can't find the file :( My boss had the
same problem with the earlier version (I lost a lot of points
selling SpamBayes to him!!!)...
I tried anadelonbrin's suggestion:
- deleted config files
- manually configured config files
but that didn't help. Heres the (german) copy of the error
message Outlook gives me:
Der Prozedureinsprungpunkt "?
PyCom_SetAndLogCOMErrorFromPyException@@YAJPBDABU_G
UID@@@Z" wurde in der DLL "Pythoncom23.dll" nicht
gefunden.
which means that the DLL entry point ("?PyCom[...]") could
not be found.
----------------------------------------------------------------------
Comment By: Stuart Carter (stu_bloke)
Date: 2004-02-20 19:29
Message:
Logged In: YES
user_id=980433
I have also got this problem on Windows 2003, OL 2003,
Python 2.3.
Removing 0.9 and re-installing 0.81 worked. Here is the log
from my 0.81 startup (0.9 log is identical to that posted
below)
Cheers!
--------------------------------------------------------
Loaded bayes database from 'D:\Documents and
Settings\carters\Application
Data\SpamBayes\default_bayes_database.db'
Loaded message database from 'D:\Documents and
Settings\carters\Application
Data\SpamBayes\default_message_database.db'
Bayes database initialized with 184 spam and 432 good
messages
SpamBayes Outlook Addin, Binary version 0.81 (September 9,
2003) starting (with engine SpamBayes Beta2, version 0.2
(July 2003))
on Windows 5.2.3790 ()
using Python 2.3+ (#46, Aug 6 2003, 16:39:24) [MSC v.1200
32 bit (Intel)]
**********************************************
****
The timer is enabled, but one of the timer intervals values is
zero
You must set both intervals before the timer will enable
SpamBayes: Watching for new messages in folder Inbox
SpamBayes: Watching for new messages in folder Junk E-mail
Processing 0 missed spam in folder 'Inbox' took 11.5316ms
FAILED to add the toolbar
item 'SpamBayesCommand.Manager' - (-
2147352567, 'Exception occurred.', (0, None, None, None, 0, -
2147467259), None)
Deleted the dead popup control - re-creating
----------------------------------------------------------------------
Comment By: Tony Meyer (anadelonbrin)
Date: 2004-02-19 00:04
Message:
Logged In: YES
user_id=552329
You can't see the 0.7 version either, just old versions of the
source. You should try the 1.0a9 (0.9) release, and see if
this fixes it.
----------------------------------------------------------------------
Comment By: Lee Herman (lee_herman)
Date: 2004-02-18 16:07
Message:
Logged In: YES
user_id=840726
Here's the contents of my logfile:
Error connecting to Outlook!
Traceback (most recent call last):
File "addin.pyc", line 1191, in OnConnection
File "manager.pyc", line 908, in GetManager
File "manager.pyc", line 344, in __init__
File "manager.pyc", line 492, in LocateDataDirectory
File "win32com\shell\shell.pyc", line 9, in ?
File "win32com\shell\shell.pyc", line 7, in __load
ImportError: DLL load failed: The specified procedure could
not be found.
ERROR: 'There was an error initializing the SpamBayes
addin\r\n\r\nPlease re-start Outlook and try again.'
Traceback (most recent call last):
File "addin.pyc", line 1191, in OnConnection
File "manager.pyc", line 908, in GetManager
File "manager.pyc", line 344, in __init__
File "manager.pyc", line 492, in LocateDataDirectory
File "win32com\shell\shell.pyc", line 9, in ?
File "win32com\shell\shell.pyc", line 7, in __load
ImportError: DLL load failed: The specified procedure could
not be found.
pythoncom error: Failed to call the universal dispatcher
Traceback (most recent call last):
File "win32com\universal.pyc", line 173, in dispatch
File "win32com\server\policy.pyc", line 322, in _InvokeEx_
File "win32com\server\policy.pyc", line 608, in _invokeex_
File "win32com\server\policy.pyc", line 542, in _invokeex_
File "addin.pyc", line 1227, in OnStartupComplete
exceptions.AttributeError: 'NoneType' object has no
attribute 'never_configured'
----------------------------------------------------------------------
Comment By: Lee Herman (lee_herman)
Date: 2004-02-18 15:18
Message:
Logged In: YES
user_id=840726
I have had the same experience. I deleted all versions, and
the data directory. Still no luck. I am also using Win2K, with
all updates, and Outlook XP.
What happened to version 0.8? I'd like to reinstall it, but I
only see 0.7.
----------------------------------------------------------------------
Comment By: Pat Darragh (pdarragh)
Date: 2004-02-04 02:02
Message:
Logged In: YES
user_id=967576
I am using Outlook 2003 on Windows XP. (Clean install of
Windows XP ... i.e. started with FORMAT). I have installed all
of the patches for Windows and Office. I am getting the
exact same error message. I've compared the spambase1.log
file here with the one I have on my system and they are
identical (with the execption of the username in the paths).
I've ignored the error message and manually configured
Spambyaes but without any real luck. Un-installed and re-
installed a number of times. Again, no luck.
My environment: Windows XP; Office Pro 2003; Corel Office
8; Delphi 5; Java 2 Runtime v1.4.2_03; McAfee 7.1.0; .NET
Framework 1.1
Any pointers on getting this to work would be great.
Thansk for your time.
----------------------------------------------------------------------
Comment By: Tony Meyer (anadelonbrin)
Date: 2004-01-27 07:47
Message:
Logged In: YES
user_id=552329
Could you try renaming/deleting your configuration file and
reconfiguring SpamBayes? The FAQ explains where to find it,
if you're not sure.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=498103&aid=881739&group_id=61702
More information about the Spambayes-bugs
mailing list