[SciPy-Dev] test failures with python 2.4
Ralf Gommers
ralf.gommers at googlemail.com
Sun Jun 3 16:55:16 EDT 2012
On Thu, May 31, 2012 at 5:50 PM, Denis Laxalde <denis at laxalde.org> wrote:
> Hi,
>
> Here is a list of test failures with python 2.4 (there are also failures
> with 2.7, see below).
>
> Thanks. I see those too. Should all be fixed before the first beta
ideally. Only the weave test we don't have to care about anymore.
Ralf
> Interpolate:
>
> test_interpnd.TestCloughTocher2DInterpolator.test_dense ...
> Exception exceptions.TypeError: <exceptions.TypeError instance at
> 0x7fd4d67fecf8> in 'scipy.spatial.qhull._get_delaunay_info' ignored
> Segmentation fault
>
>
> Spatial:
>
> test_qhull.TestUtilities.test_convex_hull ... ERROR
> test_qhull.TestUtilities.test_degenerate_barycentric_transforms ...
> ERROR
> test_qhull.TestUtilities.test_find_simplex ... Exception
> exceptions.TypeError: <exceptions.TypeError instance at 0x7f9e857963b0> in
> 'scipy.spatial.qhull._get_delaunay_info' ignored
> FAIL
> test_qhull.TestUtilities.test_more_barycentric_transforms ... ERROR
> test_qhull.TestUtilities.test_plane_distance ... ok
>
>
> ======================================================================
> ERROR: test_qhull.TestUtilities.test_convex_hull
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/nose/case.py", line 197, in
> runTest
> self.test(*self.arg)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/spatial/tests/test_qhull.py",
> line 75, in test_convex_hull
> assert_equal(tri.convex_hull, [[1, 2], [3, 2], [1, 0], [3, 0]])
> File "qhull.pyx", line 1109, in
> scipy.spatial.qhull.Delaunay.convex_hull (scipy/spatial/qhull.c:8406)
> ValueError: cannot resize an array references or is referenced
> by another array in this way. Use the resize function
>
>
> ======================================================================
> ERROR:
> test_qhull.TestUtilities.test_degenerate_barycentric_transforms
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/nose/case.py", line 197, in
> runTest
> self.test(*self.arg)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/spatial/tests/test_qhull.py",
> line 133, in test_degenerate_barycentric_transforms
> bad_count = np.isnan(tri.transform[:,0,0]).sum()
> File "qhull.pyx", line 1028, in
> scipy.spatial.qhull.Delaunay.transform (scipy/spatial/qhull.c:7449)
> File "qhull.pyx", line 398, in
> scipy.spatial.qhull._get_barycentric_transforms (scipy/spatial/qhull.c:4300)
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/core/numeric.py",
> line 235, in asarray
> return array(a, dtype, copy=False, order=order)
> File "stringsource", line 366, in
> View.MemoryView.memoryview.__getitem__ (scipy/spatial/qhull.c:14704)
> File "stringsource", line 650, in View.MemoryView._unellipsify
> (scipy/spatial/qhull.c:17965)
> TypeError: Cannot index with type '<type 'int'>'
>
>
> ======================================================================
> ERROR: test_qhull.TestUtilities.test_more_barycentric_transforms
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/nose/case.py", line 197, in
> runTest
> self.test(*self.arg)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/spatial/tests/test_qhull.py",
> line 157, in test_more_barycentric_transforms
> unit_cube=True)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/spatial/tests/test_qhull.py",
> line 96, in _check_barycentric_transforms
> c = barycentric_transform(tri.transform, centroids)
> File "qhull.pyx", line 1028, in
> scipy.spatial.qhull.Delaunay.transform (scipy/spatial/qhull.c:7449)
> File "qhull.pyx", line 398, in
> scipy.spatial.qhull._get_barycentric_transforms (scipy/spatial/qhull.c:4300)
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/core/numeric.py",
> line 235, in asarray
> return array(a, dtype, copy=False, order=order)
> File "stringsource", line 366, in
> View.MemoryView.memoryview.__getitem__ (scipy/spatial/qhull.c:14704)
> File "stringsource", line 650, in View.MemoryView._unellipsify
> (scipy/spatial/qhull.c:17965)
> TypeError: Cannot index with type '<type 'int'>'
>
>
> ======================================================================
> FAIL: test_qhull.TestUtilities.test_find_simplex
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/nose/case.py", line 197, in
> runTest
> self.test(*self.arg)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/spatial/tests/test_qhull.py",
> line 33, in test_find_simplex
> assert_equal(i, p[2], err_msg='%r' % (p,))
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/testing/utils.py",
> line 256, in assert_equal
> return assert_array_equal(actual, desired, err_msg, verbose)
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/testing/utils.py",
> line 707, in assert_array_equal
> verbose=verbose, header='Arrays are not equal')
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/testing/utils.py",
> line 636, in assert_array_compare
> raise AssertionError(msg)
> AssertionError:
> Arrays are not equal
> (0.25, 0.25, 1)
> (mismatch 100.0%)
> x: array(-1, dtype=int32)
> y: array(1)
>
>
> ----------------------------------------------------------------------
> Ran 291 tests in 13.335s
>
> FAILED (errors=3, failures=1)
>
>
>
> Weave:
>
> FAIL: test_set_complex (test_scxx_object.TestObjectSetItemOpKey)
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/weave/tests/test_scxx_object.py",
> line 943, in test_set_complex
> assert_equal(sys.getrefcount(key),4) # should be 3
> File
> "/home/denis/.local/lib/python2.4/site-packages/numpy/testing/utils.py",
> line 313, in assert_equal
> raise AssertionError(msg)
> AssertionError:
> Items are not equal:
> ACTUAL: 3
> DESIRED: 4
>
>
> Failures not specific to python 2.4.
>
> Sparse:
>
>
> ======================================================================
> ERROR: adding a dense matrix to a sparse matrix
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/tests/test_base.py",
> line 527, in test_add_dense
> sum1 = self.dat + self.datsp
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/dok.py", line
> 133, in __getitem__
> raise TypeError('index must be a pair of integers or slices')
> TypeError: index must be a pair of integers or slices
>
>
> ======================================================================
> ERROR: test_matmat_sparse (test_base.TestDOK)
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/tests/test_base.py",
> line 425, in test_matmat_sparse
> assert_array_almost_equal( a2*bsp, a*b)
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/dok.py", line
> 133, in __getitem__
> raise TypeError('index must be a pair of integers or slices')
> TypeError: index must be a pair of integers or slices
>
>
> ======================================================================
> ERROR: test_radd (test_base.TestDOK)
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/tests/test_base.py",
> line 279, in test_radd
> c = a + b
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/dok.py", line
> 133, in __getitem__
> raise TypeError('index must be a pair of integers or slices')
> TypeError: index must be a pair of integers or slices
>
>
> ======================================================================
> ERROR: test_rsub (test_base.TestDOK)
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/tests/test_base.py",
> line 290, in test_rsub
> assert_array_equal((self.dat -
> self.datsp),[[0,0,0,0],[0,0,0,0],[0,0,0,0]])
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/dok.py", line
> 133, in __getitem__
> raise TypeError('index must be a pair of integers or slices')
> TypeError: index must be a pair of integers or slices
>
>
> ======================================================================
> ERROR: subtracting a dense matrix to/from a sparse matrix
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/tests/test_base.py",
> line 535, in test_sub_dense
> sum1 = 3*self.dat - self.datsp
> File
> "/home/denis/.local/lib/python2.4/site-packages/scipy/sparse/dok.py", line
> 133, in __getitem__
> raise TypeError('index must be a pair of integers or slices')
> TypeError: index must be a pair of integers or slices
>
>
> ----------------------------------------------------------------------
> Ran 1210 tests in 12.543s
>
> FAILED (KNOWNFAIL=4, errors=5)
>
> Special:
>
>
> ................../home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1645:
> RuntimeWarning: divide by zero encountered in iv
> c1 = special.iv(v, x)
>
> /home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1645:
> RuntimeWarning: overflow encountered in iv
> c1 = special.iv(v, x)
>
> /home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1646:
> RuntimeWarning: invalid value encountered in iv
> c2 = special.iv(v, x+0j)
>
> /home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1652:
> RuntimeWarning: divide by zero encountered in divide
> dc = abs(c1/c2 - 1)
>
> /home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1652:
> RuntimeWarning: invalid value encountered in divide
> dc = abs(c1/c2 - 1)
>
> /home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py:1659:
> RuntimeWarning: overflow encountered in iv
> assert_(dc[k] < 1e-9, (v[k], x[k], special.iv(v[k], x[k]),
> special.iv(v[k], x[k]+0j)))
>
> F...................................................K.K.............................................................................................................................................................................................................................................................................................................................................................................................K........K..................................................
>
> ======================================================================
> FAIL: test_iv_cephes_vs_amos_mass_test (test_basic.TestBessel)
>
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/home/denis/.local/lib/python2.7/site-packages/scipy/special/tests/test_basic.py",
> line 1659, in test_iv_cephes_vs_amos_mass_test
> assert_(dc[k] < 1e-9, (v[k], x[k], special.iv(v[k], x[k]),
> special.iv(v[k], x[k]+0j)))
> File "/usr/lib/pymodules/python2.7/numpy/testing/utils.py", line
> 34, in assert_
> raise AssertionError(msg)
> AssertionError: (189.2947429454936, 3.0238805556481037,
> 4.089165443940765e-317, 0j)
>
>
> ----------------------------------------------------------------------
> Ran 514 tests in 6.908s
>
> FAILED (KNOWNFAIL=4, failures=1)
>
>
> Building/testing environment for python 2.4 (Debian wheezy/sid x86_64):
>
> NumPy version 1.6.2
> NumPy is installed in
> /home/denis/.local/lib/python2.4/site-packages/numpy
> SciPy version 0.11.0.dev-127acfd
> SciPy is installed in
> /home/denis/.local/lib/python2.4/site-packages/scipy
> Python version 2.4.6 (#2, Sep 25 2009, 22:22:06) [GCC 4.3.4]
> nose version 1.1.2
>
>
> --
> Denis
>
> _______________________________________________
> SciPy-Dev mailing list
> SciPy-Dev at scipy.org
> http://mail.scipy.org/mailman/listinfo/scipy-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.python.org/pipermail/scipy-dev/attachments/20120603/f62d80c5/attachment.html>
More information about the SciPy-Dev
mailing list