From euro_ii at libero.it Mon Nov 2 12:39:38 2009 From: euro_ii at libero.it (euro_ii at libero.it) Date: Mon, 2 Nov 2009 12:39:38 +0100 Subject: [PythonCAD] wiki updates Message-ID: Hi All, New video are available from youtube... just write pythoncad end click on search button. I had made some upgrade at the pythoncad wiki site, linking the video on the menuReference section and updating some sections. enjoy, Matteo ps: Pythoncad need more help ... do not forget it .. From jantonio.martin at gmail.com Tue Nov 24 13:31:16 2009 From: jantonio.martin at gmail.com (=?ISO-8859-1?Q?Jos=E9_Antonio_Mart=EDn_Prieto?=) Date: Tue, 24 Nov 2009 13:31:16 +0100 Subject: [PythonCAD] Setup links are broken Message-ID: Hello, I'm trying to install Pythoncad on a windows pc, and I have problems with pygtk. Which is the easiest way to install pygtk for windows? By the way, the links in http://morgul.no-ip.com/dokuwiki/doku.php?id=installation#windows_installation_procedure seem to be broken. If someone has new links, I will update them in the wiki. Regards, Jose Antonio From jantonio.martin at gmail.com Tue Nov 24 13:46:21 2009 From: jantonio.martin at gmail.com (=?ISO-8859-1?Q?Jos=E9_Antonio_Mart=EDn_Prieto?=) Date: Tue, 24 Nov 2009 13:46:21 +0100 Subject: [PythonCAD] Opening the r37 tarball Message-ID: Hello again, has anyone managed to open the r37 tarball from http://sourceforge.net/projects/pythoncad/files/ in linux? I'm trying to open it, as usual, with # tar zxvf pythoncad.tar.gz but I get a lot of errors and, at the end, only a link to "/home/matteo/Programming/Git/pythoncad". Any hints? -- "In a world without frontiers, who needs Gates and Windows? From gertwin.groen at gmail.com Tue Nov 24 20:50:15 2009 From: gertwin.groen at gmail.com (gertwin.groen at gmail.com) Date: Tue, 24 Nov 2009 19:50:15 +0000 Subject: [PythonCAD] Setup links are broken In-Reply-To: Message-ID: <000e0cdf765044bb5504792340e3@google.com> Hello Jose, I think the link to the windows installer should be: http://www.gtk.org/download-windows.html Download page for PyGTK is: http://www.pygtk.org/downloads.html From this page there is also a download link for the GTK runtime. Hope this helps. Regards, Gertwin Groen Op schreef Jos? Antonio Mart?n Prieto : > Hello, > I'm trying to install Pythoncad on a windows pc, and I have problems with > pygtk. > Which is the easiest way to install pygtk for windows? > By the way, the links in > http://morgul.no-ip.com/dokuwiki/doku.php?id=installation#windows_installation_procedure > seem to be broken. If someone has new links, I will update them in the > wiki. > Regards, > Jose Antonio > _______________________________________________ > PythonCAD mailing list > PythonCAD at python.org > http://mail.python.org/mailman/listinfo/pythoncad -------------- next part -------------- An HTML attachment was scrubbed... URL: From gertwin.groen at gmail.com Tue Nov 24 21:18:35 2009 From: gertwin.groen at gmail.com (gertwin.groen at gmail.com) Date: Tue, 24 Nov 2009 20:18:35 +0000 Subject: [PythonCAD] Opening the r37 tarball In-Reply-To: Message-ID: <0015174c1d0a8d22e9047923a519@google.com> Hello Jose, I also can't decompress the pythoncad.tar.gz file either. Maybe Matteo can investigate this. Regards, Gertwin Op schreef Jos? Antonio Mart?n Prieto : > Hello again, > has anyone managed to open the r37 tarball from > http://sourceforge.net/projects/pythoncad/files/ in linux? > I'm trying to open it, as usual, with > # tar zxvf pythoncad.tar.gz > but I get a lot of errors and, at the end, only a link to > "/home/matteo/Programming/Git/pythoncad". > Any hints? > -- > "In a world without frontiers, who needs Gates and Windows? > _______________________________________________ > PythonCAD mailing list > PythonCAD at python.org > http://mail.python.org/mailman/listinfo/pythoncad -------------- next part -------------- An HTML attachment was scrubbed... URL: From jantonio.martin at gmail.com Wed Nov 25 12:17:59 2009 From: jantonio.martin at gmail.com (=?ISO-8859-1?Q?Jos=E9_Antonio_Mart=EDn_Prieto?=) Date: Wed, 25 Nov 2009 12:17:59 +0100 Subject: [PythonCAD] Setup links are broken In-Reply-To: <000e0cdf765044bb5504792340e3@google.com> References: <000e0cdf765044bb5504792340e3@google.com> Message-ID: Hi Gertwin, thanks a lot for the links. I have just installed pythoncad and rewritten the installation procedure in the wiki: http://morgul.no-ip.com/dokuwiki/doku.php?id=installation#windows_installation_procedure Regards, Jose Antonio On Tue, Nov 24, 2009 at 8:50 PM, wrote: > Hello Jose, > > I think the link to the windows installer should be: > http://www.gtk.org/download-windows.html > Download page for PyGTK is: http://www.pygtk.org/downloads.html > From this page there is also a download link for the GTK runtime. > > Hope this helps. > > Regards, > Gertwin Groen > > > Op schreef Jos? Antonio Mart?n Prieto : >> Hello, >> >> I'm trying to install Pythoncad on a windows pc, and I have problems with >> pygtk. >> >> Which is the easiest way to install pygtk for windows? >> >> >> >> By the way, the links in >> >> >> http://morgul.no-ip.com/dokuwiki/doku.php?id=installation#windows_installation_procedure >> >> seem to be broken. If someone has new links, I will update them in the >> >> wiki. >> >> >> >> Regards, >> >> Jose Antonio >> >> _______________________________________________ >> >> PythonCAD mailing list >> >> PythonCAD at python.org >> >> http://mail.python.org/mailman/listinfo/pythoncad >> From jantonio.martin at gmail.com Wed Nov 25 17:01:54 2009 From: jantonio.martin at gmail.com (=?ISO-8859-1?Q?Jos=E9_Antonio_Mart=EDn_Prieto?=) Date: Wed, 25 Nov 2009 17:01:54 +0100 Subject: [PythonCAD] Opening the r37 tarball In-Reply-To: <0015174c1d0a8d22e9047923a519@google.com> References: <0015174c1d0a8d22e9047923a519@google.com> Message-ID: Hello, I have finally managed to open the tar.gz file (in windows with 7zip), and I have packaged the contents in a zip file, that I have uploaded to the wiki: http://morgul.no-ip.com/dokuwiki/doku.php?id=download I will remove this file from the wiki as soon as Matteo can release the correct file in sourceforge.net. By the way, I have upgraded the wiki to the latest stable version of dokuwiki. Regards, Jose Antonio On Tue, Nov 24, 2009 at 9:18 PM, wrote: > Hello Jose, > > I also can't decompress the pythoncad.tar.gz file either. > Maybe Matteo can investigate this. > > Regards, > Gertwin > > > > Op schreef Jos? Antonio Mart?n Prieto : >> Hello again, >> >> has anyone managed to open the r37 tarball from >> >> http://sourceforge.net/projects/pythoncad/files/ in linux? >> >> >> >> I'm trying to open it, as usual, with >> >> # tar zxvf pythoncad.tar.gz >> >> but I get a lot of errors and, at the end, only a link to >> >> "/home/matteo/Programming/Git/pythoncad". >> >> >> >> Any hints? >> >> >> >> -- >> >> "In a world without frontiers, who needs Gates and Windows? >> >> _______________________________________________ >> >> PythonCAD mailing list >> >> PythonCAD at python.org >> >> http://mail.python.org/mailman/listinfo/pythoncad >> > _______________________________________________ > PythonCAD mailing list > PythonCAD at python.org > http://mail.python.org/mailman/listinfo/pythoncad > > -- "In a world without frontiers, who needs Gates and Windows? From jantonio.martin at gmail.com Wed Nov 25 23:14:43 2009 From: jantonio.martin at gmail.com (=?ISO-8859-1?Q?Jos=E9_Antonio_Mart=EDn_Prieto?=) Date: Wed, 25 Nov 2009 23:14:43 +0100 Subject: [PythonCAD] Password recovery in the wiki Message-ID: Hello, I have just solved a problem with the password recovery system in the wiki. The php sendmail didn't work, so I have installed the plugin 'swiftmail', that should do. I have made some tests and everything seems to work fine. Thanks to Miguel Angel for reporting this bug. Regards, Jose Antonio From euro_ii at libero.it Thu Nov 26 06:48:27 2009 From: euro_ii at libero.it (euro_ii at libero.it) Date: Thu, 26 Nov 2009 06:48:27 +0100 (CET) Subject: [PythonCAD] wiki Pythoncad menu Reference Message-ID: <28155133.906641259214507027.JavaMail.root@wmail6.libero.it> Hi All, I made some video on you tube and create a pythoncad channel, for the people that want to learn pythoncad or are interested in it. If someone want to go on with the creation of videos, I will give the youtube pws for the pythoncad channel for uploading the videos, or just forward the video to me, I will provide to upload it as soon is possible. If you go on the pythoncadwiki, under Commands_reference ? menu_reference ? fillettwoline there is an exsample on how i have integrated the documentation with the video. The guideline could be: 1) short description of the command 2) short description of all the option avaiable 3) Video linked from you tube that show the functionality (around 2 minutes). Thanks Matteo From safe at safemasters.co.nz Thu Nov 26 08:50:20 2009 From: safe at safemasters.co.nz (Fraser Burns) Date: Thu, 26 Nov 2009 20:50:20 +1300 Subject: [PythonCAD] Opening Tarball In-Reply-To: References: Message-ID: <4B0E333C.6010503@safemasters.co.nz> Wont you need to put it in this format? tar -zxvf pythoncad.tar.gz regards Fraser