From ahaas at airmail.net  Fri Sep 16 19:28:42 2005
From: ahaas at airmail.net (ahaas@airmail.net)
Date: Fri, 16 Sep 2005 12:28:42 -0500 (CDT)
Subject: [PythonCAD] Update on my situation
Message-ID: <3849.70.248.190.60.1126891722.squirrel@webmail.airmail.net>

Hi.

Last weekend was spent packing up things, and this week was moving them to
my new residence in Texas. Maybe in a couple of days the place will start
looking  like a livable house instead of a sea of boxes. I don't have any
internet connection at the place yet, and there may be some electrical
work needed on the house before things can be activated. Hopefully things
will be in place at the beginning of October.

Art


From pachi at mmn-arquitectos.com  Mon Sep 19 12:19:58 2005
From: pachi at mmn-arquitectos.com (Rafael Villar Burke)
Date: Mon, 19 Sep 2005 12:19:58 +0200
Subject: [PythonCAD] DXF python library
Message-ID: <432E90CE.20603@mmn-arquitectos.com>

Hi,

I've just seen a python library to generate DXF files and it could be 
useful for PythonCAD.
General information and a link to the home page is here:
http://cheeseshop.python.org/pypi/SDXF/

Keep the good work going,

Rafael Villar Burke


From scratchcomputing at gmail.com  Mon Sep 19 18:13:17 2005
From: scratchcomputing at gmail.com (Eric Wilhelm)
Date: Mon, 19 Sep 2005 09:13:17 -0700
Subject: [PythonCAD] DXF python library
In-Reply-To: <432E90CE.20603@mmn-arquitectos.com>
References: <432E90CE.20603@mmn-arquitectos.com>
Message-ID: <200509190913.17585.ewilhelm@cpan.org>

# from Rafael Villar Burke
# on Monday 19 September 2005 03:19 am:

>I've just seen a python library to generate DXF files and it could be
>useful for PythonCAD.
>General information and a link to the home page is here:
>http://cheeseshop.python.org/pypi/SDXF/

Nice.  I haven't made it as far as dxf write support with the 
uber-converter, so this may be useful.  If anyone wants to pitch in, 
feel free to contact me.  Read support for pythoncad files is already 
there, so if you're itching to export to dxf you just need to write 
rzp2dxf.  This should be fairly painless, since rhizopod is mostly a 	
sane view of dxf.

  http://scratchcomputing.com/projects/uber-converter/

--Eric
-- 
Issues of control, repair, improvement, cost, or just plain
understandability all come down strongly in favor of open source
solutions to complex problems of any sort.
--Robert G. Brown
---------------------------------------------------
    http://scratchcomputing.com
---------------------------------------------------

From ahaas at airmail.net  Mon Sep 26 17:45:49 2005
From: ahaas at airmail.net (ahaas@airmail.net)
Date: Mon, 26 Sep 2005 10:45:49 -0500 (CDT)
Subject: [PythonCAD] Dodged another hurricane!
Message-ID: <3547.70.244.37.239.1127749549.squirrel@webmail.airmail.net>

Hi.

After moving back to Texas due to Katrina, I had to spend the last couple
of days getting out of the way of Rita. As the storm made landfall near
the Texas/Louisiana border there was little damage in the area where I
live. There was the possibility that I would get an internet connection
this week, but the re may be a delay in that due to the storm.

Art