From eliswilson at hushmail.com Wed May 1 01:13:20 2013 From: eliswilson at hushmail.com (eliswilson at hushmail.com) Date: Tue, 30 Apr 2013 19:13:20 -0400 Subject: [python-nl] Biggest Fake Conference in Computer Science Message-ID: <20130430231321.1C989E6736@smtp.hushmail.com> Biggest Fake Conference in Computer Science We are researchers from different parts of the world and conducted a study on the world?s biggest bogus computer science conference WORLDCOMP http://sites.google.com/site/worlddump1 organized by Prof. Hamid Arabnia from University of Georgia, USA. We submitted a fake paper to WORLDCOMP 2011 and again (the same paper with a modified title) to WORLDCOMP 2012. This paper had numerous fundamental mistakes. Sample statements from that paper include: (1). Binary logic is fuzzy logic and vice versa (2). Pascal developed fuzzy logic (3). Object oriented languages do not exhibit any polymorphism or inheritance (4). TCP and IP are synonyms and are part of OSI model (5). Distributed systems deal with only one computer (6). Laptop is an example for a super computer (7). Operating system is an example for computer hardware Also, our paper did not express any conceptual meaning. However, it was accepted both the times without any modifications (and without any reviews) and we were invited to submit the final paper and a payment of $500+ fee to present the paper. We decided to use the fee for better purposes than making Prof. Hamid Arabnia richer. After that, we received few reminders from WORLDCOMP to pay the fee but we never responded. This fake paper is different from the two fake papers already published (see https://sites.google.com/site/worlddump4 for details) in WORLDCOMP. We MUST say that you should look at the above website if you have any thoughts of participating in WORLDCOMP. DBLP and other indexing agencies have stopped indexing WORLDCOMP?s proceedings since 2011 due to its fakeness. See http://www.informatik.uni-trier.de/~ley/db/conf/icai/index.html for of one of the conferences of WORLDCOMP and notice that there is no listing after 2010. See Section 2 of http://sites.google.com/site/dumpconf for comments from well-known researchers about WORLDCOMP. The status of your WORLDCOMP papers can be changed from scientific to other (i.e., junk or non-technical) at any time. Better not to have a paper than having it in WORLDCOMP and spoil the resume and peace of mind forever! Our study revealed that WORLDCOMP is money making business, using University of Georgia mask, for Prof. Hamid Arabnia. He is throwing out a small chunk of that money (around 20 dollars per paper published in WORLDCOMP?s proceedings) to his puppet (Mr. Ashu Solo or A.M.G. Solo) who publicizes WORLDCOMP and also defends it at various forums, using fake/anonymous names. The puppet uses fake names and defames other conferences to divert traffic to WORLDCOMP. He also makes anonymous phone calls and threatens the critiques of WORLDCOMP (See Item 7 of Section 5 of above website). That is, the puppet does all his best to get a maximum number of papers published at WORLDCOMP to get more money into his (and Prof. Hamid Arabnia?s) pockets. Prof. Hamid Arabnia makes a lot of tricks. For example, he appeared in a newspaper to fool the public, claiming him a victim of cyber-attack (see Item 8 in Section 5 of above website). Monte Carlo Resort (the venue of WORLDCOMP for more than 10 years, until 2012) has refused to provide the venue for WORLDCOMP?13 because of the fears of their image being tarnished due to WORLDCOMP?s fraudulent activities. That is why WORLDCOMP?13 is taking place at a different resort. WORLDCOMP will not be held after 2013. The draft paper submission deadline is over but still there are no committee members, no reviewers, and there is no conference Chairman. The only contact details available on WORLDCOMP?s website is just an email address! We ask Prof. Hamid Arabnia to publish all reviews for all the papers (after blocking identifiable details) since 2000 conference. Reveal the names and affiliations of all the reviewers (for each year) and how many papers each reviewer had reviewed on average. We also ask him to look at the Open Challenge (Section 6) at https://sites.google.com/site/moneycomp1 and respond if he has any professional values. Sorry for posting to multiple lists. Spreading the word is the only way to stop this bogus conference. Please forward this message to other mailing lists and people. We are shocked with Prof. Hamid Arabnia and his puppet?s activities at http://worldcomp-fake-bogus.blogspot.com Search Google using the keyword worldcomp fake for additional links. From vm at klankschap.nl Wed May 1 01:30:11 2013 From: vm at klankschap.nl (Floris van Manen) Date: Wed, 1 May 2013 01:30:11 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <20130426205343.GA22026@jkva-vps.colo.transip.net> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> Message-ID: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, bijvoorbeeld voor kunst en / of wetenschap? .Floris From ronaldoussoren at mac.com Wed May 1 07:57:46 2013 From: ronaldoussoren at mac.com (Ronald Oussoren) Date: Wed, 1 May 2013 07:57:46 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <7C995743-AAA9-43E4-9373-7964FCE43E90@mac.com> On 1 May, 2013, at 1:30, Floris van Manen wrote: > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? Ik gebruik Python voor het maken van GUIs en proces automatisering. Ronald > > .Floris > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl From jan.murre at gmail.com Wed May 1 08:22:34 2013 From: jan.murre at gmail.com (Jan Murre) Date: Wed, 1 May 2013 08:22:34 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: Ik weet dat Stani leuke artistieke dingen met Python deed ( http://pythonide.blogspot.nl/2008/10/how-to-make-money-with-free-software.html) en waarschijnlijk nog doet. Groet, Jan Murre 2013/5/1 Floris van Manen > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het > bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? > > .Floris > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: From motoom at xs4all.nl Wed May 1 08:50:26 2013 From: motoom at xs4all.nl (Michiel Overtoom) Date: Wed, 1 May 2013 08:50:26 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <53A9FC47-119F-4437-BE66-8A66E6EFCA47@xs4all.nl> On May 1, 2013, at 01:30, Floris van Manen wrote: > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites Op m'n werk gebruiken we Python ook voor allerlei import- en exportklussen, data-transformaties, gegevens bijelkaar zoeken, systeem/infrastructuur automatisering en documentgeneratie. (Los van dat zijn onze websites ook ge?mplementeerd met Python ;-) Voor m'n persoonlijke projecten gebruik ik als het even kan ??k Python, vanwege de fantastische datastructuren en 'batteries-included'. Maar als ik een GUI applikatie voor het Windows platform wil schrijven, grijp ik nog altijd naar m'n C++ ontwikkelomgeving, dat heeft nog wat minder frictie dan PyQt. Groets, -- Test je kennis van bloemen! http://www.leer-de-bloemen.nl of http://www.learn-the-flowers.com voor de Engelse versie. From dirkjan at ochtman.nl Wed May 1 09:31:41 2013 From: dirkjan at ochtman.nl (Dirkjan Ochtman) Date: Wed, 1 May 2013 09:31:41 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: 2013/5/1 Floris van Manen : > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? Wij hebben een startup waarbij we een hedge fund opzetten, met een volledig systematische trading-strategie die eigenlijk helemaal in Python geimplementeerd is. Geen kunst, ook niet echt wetenschap, maar ook niet alleen maar webdev! Groet, Dirkjan From info at arjenvanelteren.com Wed May 1 09:38:12 2013 From: info at arjenvanelteren.com (Arjen van Elteren) Date: Wed, 01 May 2013 09:38:12 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <5180C664.8090500@arjenvanelteren.com> Beste Floris, Jazeker! Python wordt heel veel gebruikt in de wetenschap (vooral met numpy en matplotlib, waarbij je een soort matlab achtige omgeving krijgt) Wij hebben de afgelopen jaren een geheel open source python project opgezet om astrofysische simulaties te kunnen doen. Python is hierbij het hoofd-bestandsdeel (gebruikt om verschillende bestaande simulatie codes (in C of Fortran) te koppelen), zie hier: http://www.amusecode.org. Arjen On 01/05/13 01:30, Floris van Manen wrote: > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? > > .Floris > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl > From peterajhilbers at gmail.com Wed May 1 10:10:54 2013 From: peterajhilbers at gmail.com (Peter A.J. Hilbers) Date: Wed, 01 May 2013 10:10:54 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <5180C664.8090500@arjenvanelteren.com> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> <5180C664.8090500@arjenvanelteren.com> Message-ID: <5180CE0E.6050203@tue.nl> An HTML attachment was scrubbed... URL: From berco.beute at paylogic.com Wed May 1 10:19:55 2013 From: berco.beute at paylogic.com (Berco Beute) Date: Wed, 1 May 2013 10:19:55 +0200 Subject: [python-nl] PyGrunn: May 10th 2013 (tickets, speakers, RFP) In-Reply-To: References: Message-ID: Hey everybody, A small reminder that PyGrunn 2013 will take place next week Friday (May 10th). It is shaping up to be a great day full of excellent talks and many Python enthusiasts. The final tickets are on sale so be sure to act quickly if you want to join the fun. Due to a cancellation we have an open speaker slot. Contact me if you would like to want spend half an hour to share your ideas with a substantial Python audience. Hope to see some of you next week! Berco On Mon, Mar 25, 2013 at 4:46 PM, Berco Beute wrote: > Hi all, > > I am proud to announce another episode of the legendary PyGrunn conference! > This year's edition will take place on May 10th at Forum Images in > Groningen. > > *About* > PyGrunn is the 'Python and friends' conference with a local footprint and > global mindset. Firmly rooted in the open source culture it aims to provide > the leading lights in advanced internet technologies a platform to inform, > inspire and impress their peers. But the most important part is of course > hanging out with peers. PyGrunn has a non-commercial character and tickets > are just 25 euro, which is only for covering the costs of food, drinks and > an already legendary t-shirt. Days chock-full of pyhon/geek/hacker fun > don't come much cheaper than that! Still in doubt? Ask someone who visited > a previous edition. Confirmed keynote speakers for this year are Armin > Ronacher (flask, jinja, werkzeug), Kenneth Reitz (Requests) and Holger > Krekel (pypy, py.test). > > *Tickets* > Tickets are already on sale at the PyGrunn site. There > are only 200 tickets available and they will be sold out for sure, so don't > hesitate. The 25 euro should not hold you back. > > *RFP* > There are still a few open slots in the schedule, so we made a Request > for Proposals (RFP) where you can > submit your ideas for a talk or a poster/paper. We reserved some space > (walls) for paper/poster presentations as well. You can use the same RFP > for that. The submission deadline is April 15th. We are especially > interested in talks about one of the themes this year ('python & big data' > and 'python in science and education'). The rule of thumb for talks is that > they should inform, inspire and impress a technical audience. In TED-like > spirit the audience should be blown away in half an hour after which > discussions can continue in the time between talks. Not all talks have to > be about Python since it's the 'python and friends conference', we always > use a few slots for talks about related 'hot' technologies. > > *Sponsors* > Since PyGrunn has a non-commercial character it depends on the sponsors. > As always Paylogic will cover a lot of the > costs, and we are joined this year by Voys and Goldmund, > Wyldebeast & Wunderliebe , but we would love to see > more sponsors supporting the PyGrunn community. > > Spread the word and I hope to see you all at PyGrunn 2013! > > Cheers, > Berco Beute > CTO Paylogic > > PS: And yes, Paylogic is still actively lookingfor 4 python software engineers, a DevOp, a System Administrator and a > Quality Assurance Engineer. :) > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From otten.johan at gmail.com Wed May 1 12:53:30 2013 From: otten.johan at gmail.com (Johan Otten) Date: Wed, 1 May 2013 12:53:30 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: Op het kunst gebied, de scener Paniq heeft dit ooit een tijd geleden gemaakt in C++ en Python met SVG: https://www.youtube.com/watch?v=MKctnuWWEs8 source hier: https://bitbucket.org/paniq/masagin/src 2013/5/1 Floris van Manen > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het > bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? > > .Floris > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rui at intk.com Wed May 1 12:56:26 2013 From: rui at intk.com (Rui Guerra) Date: Wed, 1 May 2013 12:56:26 +0200 Subject: [python-nl] Python Software Developer Message-ID: Are you looking for a software developer position? Look no further. We got the position that will change your life. We mainly develop websites for museums [1] and occasionally develop our own entrepreneurial [2] and art projects [3]. The expertise we are looking for is Python, Django, JavaScript, CSS and mobile web development. The candidate must be fluent in english. We are looking for someone with experience to whom we offer a decent salary. Alternatively, we are open to smart young people without experience to whom we offer an internship. We are based in the centre of Utrecht, the Netherlands at the Dutch Game Garden. You can send us your CV to rocktstar [AT] intk.com but we actually prefer links to your presence on the following website: Linkedin, Github, Twitter, etc. [1] http://www.arnolfini.org.uk [2] http://www.museum-analytics.org [3] http://www.intk.com/projects/uncloud -------------- next part -------------- An HTML attachment was scrubbed... URL: From onnodb at xs4all.nl Wed May 1 15:26:26 2013 From: onnodb at xs4all.nl (Onno Broekmans) Date: Wed, 1 May 2013 15:26:26 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? In de wetenschappelijke wereld wordt Python vrij veel gebruikt, naast pakketten als MATLAB en R. Belangrijke packages zijn dan o.a. NumPy, SciPy, matplotlib en iPython --- plus nog veel meer, afhankelijk van het vakgebied. Toevallig is er morgen en overmorgen overigens ook een cursus "programmeervaardigheden voor wetenschappers" in Amsterdam, die gebaseerd is op Python: www.software-carpentry.org www.data2semantics.org/bootcamp Mocht je hier meer over willen weten, dan help ik je graag verder! Met vriendelijke groeten, Onno 2013/5/1 Floris van Manen : > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? > > .Floris > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl From govert.online at gmail.com Wed May 1 15:41:45 2013 From: govert.online at gmail.com (Govert Buijs) Date: Wed, 1 May 2013 15:41:45 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: Kunst : Blender gebruikt Python Op 1 mei 2013 12:53 schreef Johan Otten het volgende: > Op het kunst gebied, de scener Paniq heeft dit ooit een tijd geleden > gemaakt in C++ en Python met SVG: > > https://www.youtube.com/watch?v=MKctnuWWEs8 > > source hier: https://bitbucket.org/paniq/masagin/src > > > 2013/5/1 Floris van Manen > >> Zijn er mensen op dit forum die python voor iets anders gebruiken dan het >> bouwen van websites, >> bijvoorbeeld voor kunst en / of wetenschap? >> >> .Floris >> >> _______________________________________________ >> Python-nl mailing list >> Python-nl at python.org >> http://mail.python.org/mailman/listinfo/python-nl >> > > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vm at klankschap.nl Wed May 1 18:32:31 2013 From: vm at klankschap.nl (Floris van Manen) Date: Wed, 1 May 2013 18:32:31 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: De vraag was of er hier op het forum mensen zijn die python voor iets anders dan voor websites gebruiken :-) Ik weet wel dat er verschillende (en steeds meer) apps en handige pakketten zijn die python gebruiken, maar wie zijn de gebruikers hier binnen het forum... .F On 1 May 2013, at 15:41, Govert Buijs wrote: > Kunst : Blender gebruikt Python > From P.A.J.Hilbers at tue.nl Wed May 1 19:06:58 2013 From: P.A.J.Hilbers at tue.nl (Hilbers, P.A.J.) Date: Wed, 1 May 2013 17:06:58 +0000 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <10D44B8E-B7A5-4637-92B7-4D72E63E9E6E@tue.nl> Persoonlijk gebruik ik Python ook. Bijvoorbeeld hebben we een interface voor een moleculaire dynamica Simulatie programma(Pumma) in Python ontwikkeld. Op 1 mei 2013 om 18:41 heeft "Floris van Manen" het volgende geschreven: > De vraag was of er hier op het forum mensen zijn die python voor iets anders dan voor websites gebruiken :-) > Ik weet wel dat er verschillende (en steeds meer) apps en handige pakketten zijn die python gebruiken, maar wie zijn de gebruikers hier binnen het forum... > .F > > > On 1 May 2013, at 15:41, Govert Buijs wrote: > >> Kunst : Blender gebruikt Python >> > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl From reinoud.v at n.leeuwen.net Wed May 1 20:23:36 2013 From: reinoud.v at n.leeuwen.net (Reinoud van Leeuwen) Date: Wed, 1 May 2013 20:23:36 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <1DC9E0C7-04C6-47F0-AA23-987657471BA8@n.leeuwen.net> On 1 mei 2013, at 18:32, Floris van Manen wrote: > De vraag was of er hier op het forum mensen zijn die python voor iets anders dan voor websites gebruiken :-) Allerlei grotere en kleinere beheerscripts... (voor voornamelijk webservers ";-) Reinoud From dennis.kaarsemaker at booking.com Thu May 2 10:55:07 2013 From: dennis.kaarsemaker at booking.com (Dennis Kaarsemaker) Date: Thu, 02 May 2013 10:55:07 +0200 Subject: [python-nl] Senior Python/Django developer wanted In-Reply-To: References: <5176B005.6020000@progressivecompany.nl> <51778CAC.3070408@fox-it.com> <1366878151.2435.27.camel@seahawk> Message-ID: <1367484907.20312.21.camel@seahawk> On Thu, 2013-04-25 at 11:36 +0200, Michiel Overtoom wrote: > > Maybe there would be more response if one gives somewhat more > information and specifics on the work involved, instead of a generic > 'work on a Django app' qualification. I was only half-jokingingly replying, to increase the jobs per canal ratio, with no details about the job whatsoever. Yet I still got some private replies with CV's and interest in the job, this surprised me :) The job is not a joke though, and these replies show me that there are some people on this list actively looking for a job. So here are the full details: HR describes the position as follows: > We are looking ASAP for a Python/Django Contractor, who will be > responsible for implementing user stories for our ServerDB backlog. > > We are looking for someone who is fulltime available (40 hours per > week) for at least 2 months for our office in Amsterdam. > > Requirements > - - Extensive experience with Python/ Django > - - Experience with Databases > - - Familiar with Agile Development > - - Experience with System Administration > - - Excellent (English) communication skills > - - Preferable living in The Netherlands As original author of the software, I can tell you that it's not a particularly exciting/special django app, but it is a critical internal app that's integrated with all our processes to automate server managementand more. It is responsible for saving us a lot of time and work on a day-to-day basis, so the work done on it has a direct result in our efficiency. I thoroughly enjoyed working on it, but have moved on to another role and cannot give it as much attention as it deserves. -- Dennis Kaarsemaker, Systems Architect Booking.com Herengracht 597, 1017 CE Amsterdam Tel external +31 (0) 20 715 3409 Tel internal (7207) 3409 From spaans at fox-it.com Thu May 2 11:25:55 2013 From: spaans at fox-it.com (Jasper Spaans) Date: Thu, 2 May 2013 11:25:55 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: <51823123.6070005@fox-it.com> On 05/01/2013 01:30 AM, Floris van Manen wrote: > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? Jazeker, wij (Fox-IT) gebruiken Python onder meer om (in real time) mogelijke fraude te herkennen in internetbankierverkeer. Daarnaast ook om de wereld veiliger te maken, maar dat is een beetje geheim :-) Groet, Jasper -- /\____/\ ir. Jasper Spaans // Lead Developer DetACT \ (_)/ Fox-IT - For a more secure society! \ X T: +31-15-2847999 \ / \ M: +31-6-41588725 \/ KvK Haaglanden 27301624 From guido at kollerie.com Thu May 2 11:38:40 2013 From: guido at kollerie.com (Guido Kollerie) Date: Thu, 2 May 2013 11:38:40 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> References: <20130426205343.GA22026@jkva-vps.colo.transip.net> <0F39F0F7-92EC-4FBE-AB23-F98970E8DE28@klankschap.nl> Message-ID: 2013/5/1 Floris van Manen : > Zijn er mensen op dit forum die python voor iets anders gebruiken dan het bouwen van websites, > bijvoorbeeld voor kunst en / of wetenschap? Sure, data analyse mbv Pandas http://pandas.pydata.org -- Guido From wij at goeiejongens.nl Thu May 2 12:18:34 2013 From: wij at goeiejongens.nl (Goeie Jongens) Date: Thu, 02 May 2013 12:18:34 +0200 Subject: [python-nl] python voor kunst en wetenschap? In-Reply-To: References: Message-ID: <51823D7A.3080106@goeiejongens.nl> An HTML attachment was scrubbed... URL: From klaassen at goldmund-wyldebeast-wunderliebe.com Wed May 8 07:13:28 2013 From: klaassen at goldmund-wyldebeast-wunderliebe.com (Jacob Klaassen) Date: Wed, 8 May 2013 07:13:28 +0200 Subject: [python-nl] Ticket Djangcon 2013 for sale Message-ID: Hi, For next week Djangocon (15-17 May), we have one ticket left. If you are interested, contact me. Jacob Klaassen 0622411488 -------------- next part -------------- An HTML attachment was scrubbed... URL: From maurits at vanrees.org Fri May 10 22:22:55 2013 From: maurits at vanrees.org (Maurits van Rees) Date: Fri, 10 May 2013 22:22:55 +0200 Subject: [python-nl] PyGrunn summaries Message-ID: <518D571F.70109@vanrees.org> Hi, Groningen was the Python capitol of the world today. Here are my summaries of the talks at the PyGrunn conference: http://maurits.vanrees.org/weblog/topics/pygrunn Thanks to the speakers and organizers! -- Maurits van Rees: http://maurits.vanrees.org/ From sylvain at infrae.com Mon May 13 11:03:22 2013 From: sylvain at infrae.com (Sylvain Viollon) Date: Mon, 13 May 2013 11:03:22 +0200 Subject: [python-nl] Webservices question In-Reply-To: References: <51754AE3.1000103@atmind.nl> <51755462.4040302@atmind.nl> Message-ID: <21E8904B-3050-4FA1-824D-8550DCDF5AD5@infrae.com> Op 22 apr 2013, om 17:27 heeft Nicolaas Heyning | L1NDA.nl het volgende geschreven: > For hosting the webservice we use Soaplib. > Takes some figuring out how to set it up, but it works fine. Has automatic > WSDL generation. > > I use SUDS and soaplib too, they work fine and respect the standard. The other I tested didn't respect the standard at all. Regards, Sylvain, -- Sylvain Viollon -- Infrae t +31 10 243 7051 -- http://infrae.com Hoevestraat 10 3033GC Rotterdam -- The Netherlands From stappers at stappers.nl Tue May 21 22:25:58 2013 From: stappers at stappers.nl (Geert Stappers) Date: Tue, 21 May 2013 22:25:58 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline Message-ID: <20130521202558.GG12717@gpm.stappers.nl> Een goede ochtend, Het ziet er naar uit dat ik morgenavond een hele zwik tekstbestanden met de hand door moet om er een afsluitende "new line" aan te voegen. Aanleiding is een reeks waarschuwingen als dpkg-source: warning: file Foo.txt has no final newline (either original or modified version) Mijn avond gaat dus beginnen met iets te programmeren wat * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) * die de kopie regel voor regel leest * en regel voor regel wegschrijft in bestand met originele naam * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") * plus op het einde dan wel een "new line" wegschrijft Mocht je zo iets hebben liggen mail het me dan a.u.b. Groeten Geert Stappers -- > And is there a policy on top-posting vs. bottom-posting? Yes. From vm at klankschap.nl Tue May 21 23:17:48 2013 From: vm at klankschap.nl (Floris van Manen) Date: Tue, 21 May 2013 23:17:48 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <20130521202558.GG12717@gpm.stappers.nl> References: <20130521202558.GG12717@gpm.stappers.nl> Message-ID: <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> zoiets? -------------- next part -------------- A non-text attachment was scrubbed... Name: fix_eol.py Type: text/x-python-script Size: 581 bytes Desc: not available URL: -------------- next part -------------- .F On 21 May 2013, at 22:25, Geert Stappers wrote: > > Een goede ochtend, > > Het ziet er naar uit dat ik morgenavond een hele zwik tekstbestanden > met de hand door moet om er een afsluitende "new line" aan te voegen. > > Aanleiding is een reeks waarschuwingen als > dpkg-source: warning: file Foo.txt has no final newline (either original or modified version) > > Mijn avond gaat dus beginnen met iets te programmeren wat > * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) > * die de kopie regel voor regel leest > * en regel voor regel wegschrijft in bestand met originele naam > * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") > * plus op het einde dan wel een "new line" wegschrijft > > Mocht je zo iets hebben liggen mail het me dan a.u.b. > > > Groeten > Geert Stappers > -- >> And is there a policy on top-posting vs. bottom-posting? > Yes. > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl From stommepoes at stommepoes.nl Wed May 22 08:43:49 2013 From: stommepoes at stommepoes.nl (Mallory van Achterberg) Date: Wed, 22 May 2013 08:43:49 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <20130521202558.GG12717@gpm.stappers.nl> References: <20130521202558.GG12717@gpm.stappers.nl> Message-ID: <20130522064349.GA12289@jkva-vps.colo.transip.net> Dit klinkt als iets voor sed of awk. Met alleen maar re-save met set fileformat=unix en eof teken aan het eind. Of is het gedaan in Python als oefening? -Mallory On Tue, May 21, 2013 at 10:25:58PM +0200, Geert Stappers wrote: > > Een goede ochtend, > > Het ziet er naar uit dat ik morgenavond een hele zwik tekstbestanden > met de hand door moet om er een afsluitende "new line" aan te voegen. > > Aanleiding is een reeks waarschuwingen als > dpkg-source: warning: file Foo.txt has no final newline (either original or modified version) > > Mijn avond gaat dus beginnen met iets te programmeren wat > * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) > * die de kopie regel voor regel leest > * en regel voor regel wegschrijft in bestand met originele naam > * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") > * plus op het einde dan wel een "new line" wegschrijft > > Mocht je zo iets hebben liggen mail het me dan a.u.b. > > > Groeten > Geert Stappers From wichert at wiggy.net Wed May 22 09:09:02 2013 From: wichert at wiggy.net (Wichert Akkerman) Date: Wed, 22 May 2013 09:09:02 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> References: <20130521202558.GG12717@gpm.stappers.nl> <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> Message-ID: <7EB8C9F0-8EC9-4C3A-960F-284C4944A0F1@wiggy.net> On May 21, 2013, at 23:17 , Floris van Manen wrote: > zoiets? > > Let er op dat dit niet werkt als /tmp op een ander filesystem staat. Je zou eventueel shutil.move kunnen gebruiken in plaats van os.rename, ook al is dat iets minder veilig. Wichert. From wichert at wiggy.net Wed May 22 09:06:06 2013 From: wichert at wiggy.net (Wichert Akkerman) Date: Wed, 22 May 2013 09:06:06 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <20130521202558.GG12717@gpm.stappers.nl> References: <20130521202558.GG12717@gpm.stappers.nl> Message-ID: <801A4A46-4253-4013-8A3E-F3EDD3999565@wiggy.net> On May 21, 2013, at 22:25 , Geert Stappers wrote: > > Een goede ochtend, > > Het ziet er naar uit dat ik morgenavond een hele zwik tekstbestanden > met de hand door moet om er een afsluitende "new line" aan te voegen. > > Aanleiding is een reeks waarschuwingen als > dpkg-source: warning: file Foo.txt has no final newline (either original or modified version) Op zich is dat een warning en ben je vrij om die te negeren. > Mijn avond gaat dus beginnen met iets te programmeren wat > * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) > * die de kopie regel voor regel leest > * en regel voor regel wegschrijft in bestand met originele naam > * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") > * plus op het einde dan wel een "new line" wegschrijft > > Mocht je zo iets hebben liggen mail het me dan a.u.b. Er zijn verschillende mogelijkheden. Als je ziet dat dpkg-source niet klaagt over carriage returns hoef je alleen de newlines toe te voegen. Dat kan met deze one-lines: for i in $(find . -type f -a -name \*.py) ; do echo >> "$i" ; done Als je ook de dos->unix conversie wil doen kan je dos2unix (uit het package "dos2unix" hier aan toevoegen. Wichert. From ronaldoussoren at mac.com Wed May 22 09:42:37 2013 From: ronaldoussoren at mac.com (Ronald Oussoren) Date: Wed, 22 May 2013 09:42:37 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> References: <20130521202558.GG12717@gpm.stappers.nl> <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> Message-ID: On 21 May, 2013, at 23:17, Floris van Manen wrote: > zoiets? Veel te complex :-). Je kan bij het inlezen ipv. ``open(filename, 'r')`` gebruik maken van ``open(filename, 'rU')`` zodat het file object al de conversie van DOS naar unix regelovergangen doet. import tempfile, os for fn in FILES: with tempfile.NamedTemporaryFile(delete=False, dir=os.path.dirname(fn)) as out_fp: with open(fn, 'rU') as in_fp: data = in_fp.read() out_fp.write(data) os.rename(out_fp.name, fn.name) Ronald > > > > .F > > > > On 21 May 2013, at 22:25, Geert Stappers wrote: > >> >> Een goede ochtend, >> >> Het ziet er naar uit dat ik morgenavond een hele zwik tekstbestanden >> met de hand door moet om er een afsluitende "new line" aan te voegen. >> >> Aanleiding is een reeks waarschuwingen als >> dpkg-source: warning: file Foo.txt has no final newline (either original or modified version) >> >> Mijn avond gaat dus beginnen met iets te programmeren wat >> * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) >> * die de kopie regel voor regel leest >> * en regel voor regel wegschrijft in bestand met originele naam >> * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") >> * plus op het einde dan wel een "new line" wegschrijft >> >> Mocht je zo iets hebben liggen mail het me dan a.u.b. >> >> >> Groeten >> Geert Stappers >> -- >>> And is there a policy on top-posting vs. bottom-posting? >> Yes. >> _______________________________________________ >> Python-nl mailing list >> Python-nl at python.org >> http://mail.python.org/mailman/listinfo/python-nl > > _______________________________________________ > Python-nl mailing list > Python-nl at python.org > http://mail.python.org/mailman/listinfo/python-nl From vm at klankschap.nl Wed May 22 13:49:11 2013 From: vm at klankschap.nl (Floris van Manen) Date: Wed, 22 May 2013 13:49:11 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: References: <20130521202558.GG12717@gpm.stappers.nl> <5864E144-FE8F-41FB-9270-B9239CD5C8AC@klankschap.nl> Message-ID: bijna goed ... os.rename(out_fp.name, fn.name) AttributeError: 'str' object has no attribute 'name' On 22 May 2013, at 09:42, Ronald Oussoren wrote: > Veel te complex :-). Je kan bij het inlezen ipv. ``open(filename, 'r')`` gebruik maken van ``open(filename, 'rU')`` zodat het file object al de conversie van DOS naar unix regelovergangen doet. > > import tempfile, os > > for fn in FILES: > with tempfile.NamedTemporaryFile(delete=False, dir=os.path.dirname(fn)) as out_fp: > with open(fn, 'rU') as in_fp: > data = in_fp.read() > out_fp.write(data) > > os.rename(out_fp.name, fn.name) > > > Ronald From jonas at geiregat.org Fri May 24 09:31:17 2013 From: jonas at geiregat.org (Jonas Geiregat) Date: Fri, 24 May 2013 09:31:17 +0200 Subject: [python-nl] PyBug - meet-up Message-ID: <16FAC5EA-91F9-4FA0-A19F-CCC46F55ACA3@geiregat.org> Hello fellow Pythonistas, Summer is insight and maybe it's time throw something on the Barbecue ? Anyway I feel and think it's time for our 3th meet-up. I would encourage everyone to give at least a lighting talk as we discussed before. If you have a subject you would like to talk about, post it on the list so we can start putting an agenda together. If you would like to add something else to the agenda, let me know! Date, to be determined by the doodle: http://www.doodle.com/c9gkre6te9gh6rmf The meet-up will be hosted by Mobile Vikings at their building in Hasselt Kempische Steenweg 293/16 B-3500 Hasselt I'm aware that for some people it won't be easy to come to Hasselt. That's why I would encourage car pooling as much as possible! I'm coming from Kortrijk, so I'll need to pass through Ghent, Antwerp or Brussels to get to Hasselt on the big day :-) Hope to see you there! Regards, Jonas Geiregat. -------------- next part -------------- An HTML attachment was scrubbed... URL: From stappers at stappers.nl Fri May 24 15:01:14 2013 From: stappers at stappers.nl (Geert Stappers) Date: Fri, 24 May 2013 15:01:14 +0200 Subject: [python-nl] dpkg-source: warning: file Foo.txt has no final newline In-Reply-To: <20130522064349.GA12289@jkva-vps.colo.transip.net> References: <20130521202558.GG12717@gpm.stappers.nl> <20130522064349.GA12289@jkva-vps.colo.transip.net> Message-ID: <20130524130114.GD25136@gpm.stappers.nl> Op 2013-05-22 om 08:43 schreef Mallory van Achterberg: > On Tue, May 21, 2013 at 10:25:58PM +0200, Geert Stappers wrote: } } } > Mijn avond gaat dus beginnen met iets te programmeren wat > > * een kopie van een tekstbestand maakt (is tevens schrijfpermissietest) > > * die de kopie regel voor regel leest > > * en regel voor regel wegschrijft in bestand met originele naam > > * daarbij worden "carriage returns" weggelaten. (conversie "MS-DOS naar UNIX") > > * plus op het einde dan wel een "new line" wegschrijft > > > > Dit klinkt als iets voor sed of awk. Met alleen maar re-save met > set fileformat=unix en eof teken aan het eind. > Of is het gedaan in Python als oefening? > Ja, ook als Python oefening. Dank voor het vertellen van het bestaan van tempfile.NamedTemporaryFile() In de bijlage wat ik er uiteindelijk van gemaakt heb. Groeten Geert Stappers -- Leven en laten leven ------------- volgend deel ------------ #!/usr/bin/env python import os import sys import tempfile def main(): for filename in sys.argv[1:]: with tempfile.NamedTemporaryFile(delete=False, dir=os.path.dirname(filename)) as fh: with open(filename) as f: for line in f: line = line.rstrip() fh.write(line + '\n') # Rename the temporary file with the original file's name os.rename(fh.name, filename) if __name__ == '__main__': main() # l l ------------- volgend deel ------------ Een niet-tekst bijlage is gescrubt... Naam: signature.asc Type: application/pgp-signature Grootte: 198 bytes Omschrijving: Digital signature URL : From vanlith.peter at gmail.com Fri May 24 16:41:25 2013 From: vanlith.peter at gmail.com (Peter van Lith) Date: Fri, 24 May 2013 16:41:25 +0200 Subject: [python-nl] Made In Holland tijdens de WK Robocup Message-ID: <69C05D24-0EC3-432E-A25E-D43CB5377263@me.com> Beste mensen, Zoals je misschien hebt gehoord worden van 26-30 juni de WK RoboCup in Eindhoven gehouden. De RoboCup competities zijn verdeeld in de Major league voor universiteiten en de Junior league voor leerlingen van 9-19 jaar. Wat de Junior competities betreft verwachten we meer dan 1200 leerlingen uit 30 landen. Die leerlingen komen met zelfgebouwde robots wedstrijden houden met Dansen, Rescue en Voetbal. Tijdens de WK willen we publieks activiteiten opzetten en workshops organiseren voor de deelnemers. E?n van de onderdelen waaraan we denken is "Made in Holland" waarbij we willen laten zien wat er in Nederland op robotica en ICT gebied gebeurt. De producten waar we aan denken zijn: Python, GameMaker, RoboMind, RoboPal, Blender, mBed en ASML. Graag nodigen wij jullie uit om deel te nemen aan de publieksdemos en mogelijk workshops tijdens de WK. Als je interesse hebt breng ik jullie in contact met de personen die de publieks activiteiten organiseren. We hebben al contact gehad met Jack Jansen en Sjoerd Mullender van het CWI en die verwezen mij door jaar jullie. Met vriendelijke groet Peter van Lith Chair Local Organising Committee RoboCupJunior 2013 From a.vanwinkel at summacollege.nl Sat May 25 23:44:58 2013 From: a.vanwinkel at summacollege.nl (Winkel, Alex van) Date: Sat, 25 May 2013 21:44:58 +0000 Subject: [python-nl] Made In Holland tijdens de WK Robocup In-Reply-To: <7E99689E469D7146957C833FE12C6E7E7FF776@exchcbv-fl01.summacollege.nl> References: <69C05D24-0EC3-432E-A25E-D43CB5377263@me.com>, <7E99689E469D7146957C833FE12C6E7E7FF776@exchcbv-fl01.summacollege.nl> Message-ID: <7E99689E469D7146957C833FE12C6E7E7FF77F@exchcbv-fl01.summacollege.nl> Is dit alleen voor junioren ? Vriendelijke groet, Alex van Winkel ________________________________________ Van: Winkel, Alex van Verzonden: zaterdag 25 mei 2013 23:43 To: Dutch Python developers and users Onderwerp: RE: [python-nl] Made In Holland tijdens de WK Robocup ________________________________________ Van: Python-nl [python-nl-bounces+wial=roceindhoven.nl at python.org] namens Peter van Lith [vanlith.peter at gmail.com] Verzonden: vrijdag 24 mei 2013 16:41 To: python-nl at python.org Cc: Stephanie Meertens Onderwerp: [python-nl] Made In Holland tijdens de WK Robocup Beste mensen, Zoals je misschien hebt gehoord worden van 26-30 juni de WK RoboCup in Eindhoven gehouden. De RoboCup competities zijn verdeeld in de Major league voor universiteiten en de Junior league voor leerlingen van 9-19 jaar. Wat de Junior competities betreft verwachten we meer dan 1200 leerlingen uit 30 landen. Die leerlingen komen met zelfgebouwde robots wedstrijden houden met Dansen, Rescue en Voetbal. Tijdens de WK willen we publieks activiteiten opzetten en workshops organiseren voor de deelnemers. E?n van de onderdelen waaraan we denken is "Made in Holland" waarbij we willen laten zien wat er in Nederland op robotica en ICT gebied gebeurt. De producten waar we aan denken zijn: Python, GameMaker, RoboMind, RoboPal, Blender, mBed en ASML. Graag nodigen wij jullie uit om deel te nemen aan de publieksdemos en mogelijk workshops tijdens de WK. Als je interesse hebt breng ik jullie in contact met de personen die de publieks activiteiten organiseren. We hebben al contact gehad met Jack Jansen en Sjoerd Mullender van het CWI en die verwezen mij door jaar jullie. Met vriendelijke groet Peter van Lith Chair Local Organising Committee RoboCupJunior 2013 _______________________________________________ Python-nl mailing list Python-nl at python.org http://mail.python.org/mailman/listinfo/python-nl From wvanbommel at proigia.nl Tue May 28 12:29:40 2013 From: wvanbommel at proigia.nl (Wouter van Bommel) Date: Tue, 28 May 2013 12:29:40 +0200 (CEST) Subject: [python-nl] Op zoek naar een python Ontwikkelaar In-Reply-To: Message-ID: <6a10b903-8757-4439-86a4-e3b4a4989b63@jewel> Hoi Allen, Als klein bedrijf is het lastig om een python vacature op die plaatsen te krijgen waar mensen te vinden zijn, die (latent) werk zoeken. Aangezien we een Nederlands bedrijf zijn, die zich richt op de (Nederlandse) gezondheidssector, zijn internationale boards minder relevant voor ons. Uiteraard ben ik me ervan bewust dat dit niet het primaire doel van de mailinglist is en bij voorbaat bied ik dan ook mijn excuses aan, aan die mensen die zich hieraan irriteren. mvg, Wouter van Bommel -------------- next part -------------- A non-text attachment was scrubbed... Name: Vacature-201305.odt Type: application/vnd.oasis.opendocument.text Size: 28570 bytes Desc: not available URL: From lex at wikiwise.nl Tue May 28 14:03:08 2013 From: lex at wikiwise.nl (Lex Slaghuis) Date: Tue, 28 May 2013 12:03:08 +0000 Subject: [python-nl] 29 juni Amsterdam Open Data Hackathon Message-ID: Op zaterdag 29 juni is er weer een Hack de Overheid Hackathon! Veel open data, Apps, Hacks en de vraag: Ga je mee naar Europa? De inloop is vanaf 09.30 uur en we beginnen om 10.00 uur. Wat is er nieuw? Het stadhuis van de gemeente Amsterdam is voor 1 dag van ons. Dat betekent coden in de Raadszaal! We hebben de inschrijving daarom iets aangepast: Verzamel met je team de meeste likes en claim de stoel van de Burgemeester, Wethouders of Raadsleden. http://vote.hackdeoverheid.nl/ Apps for Europe is een Europees project dat op zoek is naar kansrijke en succesvolle open data ondernemers. Daarom is er exclusief voor deze groep mensen een Business Lounge waar een meet 'n greet is met Angel Investors, Business Incubators & Growth Accelerators. Een kans om te versnellen en de ingang om een plek te claimen later dit jaar op het Europese Hoofdpodium van 'Apps for Europe'. Het netwerk Open Onderwijs Data lanceert haar eigen onderwijs API. Hierdoor wordt het nog makkelijker om onderwijs Apps te ontwikkelen op basis van up-to-date informatie. Netwerken Cultuur en Zorg Data zijn natuurlijk ook weer van de partij. Lancering van Openspending in Nederland met initiatiefnemer Amsterdam Stadsdeel Centrum. Het begin van ??n centrale database met financi?le informatie van alle overheden in Nederland. Meerdere dagprijzen van 500 euro voor de vetste 'Hacks' op de dag zelf. Kortom, 29 juni Hackathon in Amsterdam: Raadszaal - Business Lounge - Verse data - Vette Apps - prijzen. Groet, Team HackdeOverheid http://www.hackdeoverheid.nl/ Twitter: @hackdeoverheid Facebook: http://www.facebook.com/Hackdeoverheid From jonas at geiregat.org Fri May 31 09:49:25 2013 From: jonas at geiregat.org (Jonas Geiregat) Date: Fri, 31 May 2013 09:49:25 +0200 Subject: [python-nl] PyBug.Be Message-ID: <6853737F-9152-48A1-A4FA-9C177D59D725@geiregat.org> Hello, I've found some time to create a website for pybug. It's located at: http://pybug.be/ I think it will benefit the visibility of the group. The source can be found at: https://github.com/jonasgeiregat/pybug-site It's a fork from: https://github.com/pythonkc/pythonkc.com I just removed the meet up specific API turned it into a django specific application. There are still some things that need to be done: Add past events Maybe integrate the doodle into upcoming events Add possibility to link to external photo service, or create an in system photo gallery Other idea's are welcome All comments are more then welcome! Regards, Jonas. -------------- next part -------------- An HTML attachment was scrubbed... URL: