[Python-3000-checkins] r56782 - in python/branches/py3k-struni: Doc/info/Makefile Doc/lib/librunpy.tex Doc/lib/libxmlrpclib.tex Doc/tut/tut.tex Doc/whatsnew/whatsnew25.tex Include/structmember.h Lib/asynchat.py Lib/distutils/command/register.py Lib/distutils/command/upload.py Lib/httplib.py Lib/runpy.py Lib/smtpd.py Lib/smtplib.py Lib/test/test_asynchat.py Lib/test/test_asyncore.py Lib/test/test_codecmaps_cn.py Lib/test/test_math.py Lib/test/test_multibytecodec_support.py Lib/test/test_pow.py Lib/test/test_resource.py Lib/test/test_runpy.py Lib/test/test_smtplib.py Lib/test/test_socket_ssl.py Lib/test/test_unicodedata.py Lib/test/test_urllib2_localnet.py Lib/threading.py Modules/cjkcodecs/_codecs_cn.c Modules/unicodedata.c Objects/stringobject.c Objects/unicodeobject.c PC/pyconfig.h Python/structmember.c configure configure.in pyconfig.h.in
guido.van.rossum
python-3000-checkins at python.org
Tue Aug 7 01:33:09 CEST 2007
Author: guido.van.rossum
Date: Tue Aug 7 01:33:07 2007
New Revision: 56782
Modified:
python/branches/py3k-struni/ (props changed)
python/branches/py3k-struni/Doc/info/Makefile
python/branches/py3k-struni/Doc/lib/librunpy.tex
python/branches/py3k-struni/Doc/lib/libxmlrpclib.tex
python/branches/py3k-struni/Doc/tut/tut.tex
python/branches/py3k-struni/Doc/whatsnew/whatsnew25.tex
python/branches/py3k-struni/Include/structmember.h
python/branches/py3k-struni/Lib/asynchat.py
python/branches/py3k-struni/Lib/distutils/command/register.py
python/branches/py3k-struni/Lib/distutils/command/upload.py
python/branches/py3k-struni/Lib/httplib.py
python/branches/py3k-struni/Lib/runpy.py
python/branches/py3k-struni/Lib/smtpd.py
python/branches/py3k-struni/Lib/smtplib.py
python/branches/py3k-struni/Lib/test/test_asynchat.py
python/branches/py3k-struni/Lib/test/test_asyncore.py
python/branches/py3k-struni/Lib/test/test_codecmaps_cn.py
python/branches/py3k-struni/Lib/test/test_math.py
python/branches/py3k-struni/Lib/test/test_multibytecodec_support.py
python/branches/py3k-struni/Lib/test/test_pow.py
python/branches/py3k-struni/Lib/test/test_resource.py
python/branches/py3k-struni/Lib/test/test_runpy.py
python/branches/py3k-struni/Lib/test/test_smtplib.py
python/branches/py3k-struni/Lib/test/test_socket_ssl.py
python/branches/py3k-struni/Lib/test/test_unicodedata.py
python/branches/py3k-struni/Lib/test/test_urllib2_localnet.py
python/branches/py3k-struni/Lib/threading.py
python/branches/py3k-struni/Modules/cjkcodecs/_codecs_cn.c
python/branches/py3k-struni/Modules/unicodedata.c
python/branches/py3k-struni/Objects/stringobject.c
python/branches/py3k-struni/Objects/unicodeobject.c
python/branches/py3k-struni/PC/pyconfig.h
python/branches/py3k-struni/Python/structmember.c
python/branches/py3k-struni/configure
python/branches/py3k-struni/configure.in
python/branches/py3k-struni/pyconfig.h.in
Log:
Merged revisions 56753-56781 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/branches/p3yk
................
r56760 | neal.norwitz | 2007-08-05 18:55:39 -0700 (Sun, 05 Aug 2007) | 178 lines
Merged revisions 56477-56759 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r56485 | facundo.batista | 2007-07-21 17:13:00 -0700 (Sat, 21 Jul 2007) | 5 lines
Selectively enable tests for asyncore.readwrite based on the presence
of poll support in the select module (since this is the only case in
which readwrite can be called). [GSoC - Alan McIntyre]
........
r56488 | nick.coghlan | 2007-07-22 03:18:07 -0700 (Sun, 22 Jul 2007) | 1 line
Add explicit relative import tests for runpy.run_module
........
r56509 | nick.coghlan | 2007-07-23 06:41:45 -0700 (Mon, 23 Jul 2007) | 5 lines
Correctly cleanup sys.modules after executing runpy relative import
tests
Restore Python 2.4 ImportError when attempting to execute a package
(as imports cannot be guaranteed to work properly if you try it)
........
r56519 | nick.coghlan | 2007-07-24 06:07:38 -0700 (Tue, 24 Jul 2007) | 1 line
Tweak runpy test to do a better job of confirming that sys has been manipulated correctly
........
r56520 | nick.coghlan | 2007-07-24 06:58:28 -0700 (Tue, 24 Jul 2007) | 1 line
Fix an incompatibility between the -i and -m command line switches as reported on python-dev by PJE - runpy.run_module now leaves any changes it makes to the sys module intact after the function terminates
........
r56523 | nick.coghlan | 2007-07-24 07:39:23 -0700 (Tue, 24 Jul 2007) | 1 line
Try to get rid of spurious failure in test_resource on the Debian buildbots by changing the file size limit before attempting to close the file
........
r56533 | facundo.batista | 2007-07-24 14:20:42 -0700 (Tue, 24 Jul 2007) | 7 lines
New tests for basic behavior of smtplib.SMTP and
smtpd.DebuggingServer. Change to use global host & port number
variables. Modified the 'server' to take a string to send back in
order to vary test server responses. Added a test for the reaction of
smtplib.SMTP to a non-200 HELO response. [GSoC - Alan McIntyre]
........
r56538 | nick.coghlan | 2007-07-25 05:57:48 -0700 (Wed, 25 Jul 2007) | 1 line
More buildbot cleanup - let the OS assign the port for test_urllib2_localnet
........
r56539 | nick.coghlan | 2007-07-25 06:18:58 -0700 (Wed, 25 Jul 2007) | 1 line
Add a temporary diagnostic message before a strange failure on the alpha Debian buildbot
........
r56543 | martin.v.loewis | 2007-07-25 09:24:23 -0700 (Wed, 25 Jul 2007) | 2 lines
Change location of the package index to pypi.python.org/pypi
........
r56551 | georg.brandl | 2007-07-26 02:36:25 -0700 (Thu, 26 Jul 2007) | 2 lines
tabs, newlines and crs are valid XML characters.
........
r56553 | nick.coghlan | 2007-07-26 07:03:00 -0700 (Thu, 26 Jul 2007) | 1 line
Add explicit test for a misbehaving math.floor
........
r56561 | mark.hammond | 2007-07-26 21:52:32 -0700 (Thu, 26 Jul 2007) | 3 lines
In consultation with Kristjan Jonsson, only define WINVER and _WINNT_WIN32
if (a) we are building Python itself and (b) no one previously defined them
........
r56562 | mark.hammond | 2007-07-26 22:08:54 -0700 (Thu, 26 Jul 2007) | 2 lines
Correctly detect AMD64 architecture on VC2003
........
r56566 | nick.coghlan | 2007-07-27 03:36:30 -0700 (Fri, 27 Jul 2007) | 1 line
Make test_math error messages more meaningful for small discrepancies in results
........
r56588 | martin.v.loewis | 2007-07-27 11:28:22 -0700 (Fri, 27 Jul 2007) | 2 lines
Bug #978833: Close https sockets by releasing the _ssl object.
........
r56601 | martin.v.loewis | 2007-07-28 00:03:05 -0700 (Sat, 28 Jul 2007) | 3 lines
Bug #1704793: Return UTF-16 pair if unicodedata.lookup cannot
represent the result in a single character.
........
r56604 | facundo.batista | 2007-07-28 07:21:22 -0700 (Sat, 28 Jul 2007) | 9 lines
Moved all of the capture_server socket setup code into the try block
so that the event gets set if a failure occurs during server setup
(otherwise the test will block forever). Changed to let the OS assign
the server port number, and client side of test waits for port number
assignment before proceeding. The test data in DispatcherWithSendTests
is also sent in multiple send() calls instead of one to make sure this
works properly. [GSoC - Alan McIntyre]
........
r56611 | georg.brandl | 2007-07-29 01:26:10 -0700 (Sun, 29 Jul 2007) | 2 lines
Clarify PEP 343 description.
........
r56614 | georg.brandl | 2007-07-29 02:11:15 -0700 (Sun, 29 Jul 2007) | 2 lines
try-except-finally is new in 2.5.
........
r56617 | facundo.batista | 2007-07-29 07:23:08 -0700 (Sun, 29 Jul 2007) | 9 lines
Added tests for asynchat classes simple_producer & fifo, and the
find_prefix_at_end function. Check behavior of a string given as a
producer. Added tests for behavior of asynchat.async_chat when given
int, long, and None terminator arguments. Added usepoll attribute to
TestAsynchat to allow running the asynchat tests with poll support
chosen whether it's available or not (improves coverage of asyncore
code). [GSoC - Alan McIntyre]
........
r56620 | georg.brandl | 2007-07-29 10:38:35 -0700 (Sun, 29 Jul 2007) | 2 lines
Bug #1763149: use proper slice syntax in docstring.
(backport)
........
r56624 | mark.hammond | 2007-07-29 17:45:29 -0700 (Sun, 29 Jul 2007) | 4 lines
Correct use of Py_BUILD_CORE - now make sure it is defined before it is
referenced, and also fix definition of _WIN32_WINNT.
Resolves patch 1761803.
........
r56632 | facundo.batista | 2007-07-30 20:03:34 -0700 (Mon, 30 Jul 2007) | 8 lines
When running asynchat tests on OS X (darwin), the test client now
overrides asyncore.dispatcher.handle_expt to do nothing, since
select.poll gives a POLLHUP error at the completion of these tests.
Added timeout & count arguments to several asyncore.loop calls to
avoid the possibility of a test hanging up a build. [GSoC - Alan
McIntyre]
........
r56633 | nick.coghlan | 2007-07-31 06:38:01 -0700 (Tue, 31 Jul 2007) | 1 line
Eliminate RLock race condition reported in SF bug #1764059
........
r56636 | martin.v.loewis | 2007-07-31 12:57:56 -0700 (Tue, 31 Jul 2007) | 2 lines
Define _BSD_SOURCE, to get access to POSIX extensions on OpenBSD 4.1+.
........
r56653 | facundo.batista | 2007-08-01 16:18:36 -0700 (Wed, 01 Aug 2007) | 9 lines
Allow the OS to select a free port for each test server. For
DebuggingServerTests, construct SMTP objects with a localhost argument
to avoid abysmally long FQDN lookups (not relevant to items under
test) on some machines that would cause the test to fail. Moved server
setup code in the server function inside the try block to avoid the
possibility of setup failure hanging the test. Minor edits to conform
to PEP 8. [GSoC - Alan McIntyre]
........
r56681 | matthias.klose | 2007-08-02 14:33:13 -0700 (Thu, 02 Aug 2007) | 2 lines
- Allow Emacs 22 for building the documentation in info format.
........
r56689 | neal.norwitz | 2007-08-02 23:46:29 -0700 (Thu, 02 Aug 2007) | 1 line
Py_ssize_t is defined regardless of HAVE_LONG_LONG. Will backport
........
r56727 | hyeshik.chang | 2007-08-03 21:10:18 -0700 (Fri, 03 Aug 2007) | 3 lines
Fix gb18030 codec's bug that doesn't map two-byte characters on
GB18030 extension in encoding. (bug reported by Bjorn Stabell)
........
r56751 | neal.norwitz | 2007-08-04 20:23:31 -0700 (Sat, 04 Aug 2007) | 7 lines
Handle errors when generating a warning.
The value is always written to the returned pointer if getting it was
successful, even if a warning causes an error. (This probably doesn't matter
as the caller will probably discard the value.)
Will backport.
........
................
Modified: python/branches/py3k-struni/Doc/info/Makefile
==============================================================================
--- python/branches/py3k-struni/Doc/info/Makefile (original)
+++ python/branches/py3k-struni/Doc/info/Makefile Tue Aug 7 01:33:07 2007
@@ -34,10 +34,10 @@
check-emacs-version:
@v="`$(EMACS) --version 2>&1 | egrep '^(GNU |X)Emacs [12]*'`"; \
- if `echo "$$v" | grep '^GNU Emacs 21' >/dev/null 2>&1`; then \
+ if `echo "$$v" | grep '^GNU Emacs 2[12]' >/dev/null 2>&1`; then \
echo "Using $(EMACS) to build the info docs"; \
else \
- echo "GNU Emacs 21 is required to build the info docs"; \
+ echo "GNU Emacs 21 or 22 is required to build the info docs"; \
echo "Found $$v"; \
false; \
fi
Modified: python/branches/py3k-struni/Doc/lib/librunpy.tex
==============================================================================
--- python/branches/py3k-struni/Doc/lib/librunpy.tex (original)
+++ python/branches/py3k-struni/Doc/lib/librunpy.tex Tue Aug 7 01:33:07 2007
@@ -56,9 +56,11 @@
If the argument \var{alter_sys} is supplied and evaluates to
\code{True}, then \code{sys.argv[0]} is updated with the value of
\code{__file__} and \code{sys.modules[__name__]} is updated with a
-temporary module object for the module being executed. Both
-\code{sys.argv[0]} and \code{sys.modules[__name__]} are restored to
-their original values before the function returns.
+new module object for the module being executed. Note that neither
+\code{sys.argv[0]} nor \code{sys.modules[__name__]} are restored to
+their original values before the function returns - if client code
+needs these values preserved, it must either save them explicitly or
+else avoid enabling the automatic alterations to \module{sys}.
Note that this manipulation of \module{sys} is not thread-safe. Other
threads may see the partially initialised module, as well as the
Modified: python/branches/py3k-struni/Doc/lib/libxmlrpclib.tex
==============================================================================
--- python/branches/py3k-struni/Doc/lib/libxmlrpclib.tex (original)
+++ python/branches/py3k-struni/Doc/lib/libxmlrpclib.tex Tue Aug 7 01:33:07 2007
@@ -94,7 +94,8 @@
\samp{>}, and \samp{\&} will be automatically escaped. However, it's
the caller's responsibility to ensure that the string is free of
characters that aren't allowed in XML, such as the control characters
-with ASCII values between 0 and 31; failing to do this will result in
+with ASCII values between 0 and 31 (except, of course, tab, newline and
+carriage return); failing to do this will result in
an XML-RPC request that isn't well-formed XML. If you have to pass
arbitrary strings via XML-RPC, use the \class{Binary} wrapper class
described below.
Modified: python/branches/py3k-struni/Doc/tut/tut.tex
==============================================================================
--- python/branches/py3k-struni/Doc/tut/tut.tex (original)
+++ python/branches/py3k-struni/Doc/tut/tut.tex Tue Aug 7 01:33:07 2007
@@ -3748,7 +3748,9 @@
\keyword{finally} clause has been executed. The \keyword{finally} clause
is also executed ``on the way out'' when any other clause of the
\keyword{try} statement is left via a \keyword{break}, \keyword{continue}
-or \keyword{return} statement. A more complicated example:
+or \keyword{return} statement. A more complicated example (having
+\keyword{except} and \keyword{finally} clauses in the same \keyword{try}
+statement works as of Python 2.5):
\begin{verbatim}
>>> def divide(x, y):
Modified: python/branches/py3k-struni/Doc/whatsnew/whatsnew25.tex
==============================================================================
--- python/branches/py3k-struni/Doc/whatsnew/whatsnew25.tex (original)
+++ python/branches/py3k-struni/Doc/whatsnew/whatsnew25.tex Tue Aug 7 01:33:07 2007
@@ -640,15 +640,20 @@
\end{verbatim}
The expression is evaluated, and it should result in an object that
-supports the context management protocol. This object may return a
-value that can optionally be bound to the name \var{variable}. (Note
-carefully that \var{variable} is \emph{not} assigned the result of
-\var{expression}.) The object can then run set-up code
-before \var{with-block} is executed and some clean-up code
-is executed after the block is done, even if the block raised an exception.
+supports the context management protocol (that is, has \method{__enter__()}
+and \method{__exit__()} methods.
-To enable the statement in Python 2.5, you need
-to add the following directive to your module:
+The object's \method{__enter__()} is called before \var{with-block} is
+executed and therefore can run set-up code. It also may return a value
+that is bound to the name \var{variable}, if given. (Note carefully
+that \var{variable} is \emph{not} assigned the result of \var{expression}.)
+
+After execution of the \var{with-block} is finished, the object's
+\method{__exit__()} method is called, even if the block raised an exception,
+and can therefore run clean-up code.
+
+To enable the statement in Python 2.5, you need to add the following
+directive to your module:
\begin{verbatim}
from __future__ import with_statement
@@ -668,9 +673,13 @@
\end{verbatim}
After this statement has executed, the file object in \var{f} will
-have been automatically closed, even if the 'for' loop
+have been automatically closed, even if the \keyword{for} loop
raised an exception part-way through the block.
+\note{In this case, \var{f} is the same object created by
+ \function{open()}, because \method{file.__enter__()} returns
+ \var{self}.}
+
The \module{threading} module's locks and condition variables
also support the '\keyword{with}' statement:
Modified: python/branches/py3k-struni/Include/structmember.h
==============================================================================
--- python/branches/py3k-struni/Include/structmember.h (original)
+++ python/branches/py3k-struni/Include/structmember.h Tue Aug 7 01:33:07 2007
@@ -68,11 +68,12 @@
#ifdef HAVE_LONG_LONG
#define T_LONGLONG 17
#define T_ULONGLONG 18
-#define T_PYSSIZET 19 /* Py_ssize_t */
#endif /* HAVE_LONG_LONG */
+#define T_PYSSIZET 19 /* Py_ssize_t */
#define T_NONE 20 /* Value is always None */
+
/* Flags */
#define READONLY 1
#define RO READONLY /* Shorthand */
Modified: python/branches/py3k-struni/Lib/asynchat.py
==============================================================================
--- python/branches/py3k-struni/Lib/asynchat.py (original)
+++ python/branches/py3k-struni/Lib/asynchat.py Tue Aug 7 01:33:07 2007
@@ -104,7 +104,7 @@
if not terminator:
# no terminator, collect it all
self.collect_incoming_data (self.ac_in_buffer)
- self.ac_in_buffer = ''
+ self.ac_in_buffer = b''
elif isinstance(terminator, int) or isinstance(terminator, int):
# numeric terminator
n = terminator
Modified: python/branches/py3k-struni/Lib/distutils/command/register.py
==============================================================================
--- python/branches/py3k-struni/Lib/distutils/command/register.py (original)
+++ python/branches/py3k-struni/Lib/distutils/command/register.py Tue Aug 7 01:33:07 2007
@@ -22,7 +22,7 @@
description = ("register the distribution with the Python package index")
- DEFAULT_REPOSITORY = 'http://www.python.org/pypi'
+ DEFAULT_REPOSITORY = 'http://pypi.python.org/pypi'
user_options = [
('repository=', 'r',
Modified: python/branches/py3k-struni/Lib/distutils/command/upload.py
==============================================================================
--- python/branches/py3k-struni/Lib/distutils/command/upload.py (original)
+++ python/branches/py3k-struni/Lib/distutils/command/upload.py Tue Aug 7 01:33:07 2007
@@ -20,7 +20,7 @@
description = "upload binary package to PyPI"
- DEFAULT_REPOSITORY = 'http://www.python.org/pypi'
+ DEFAULT_REPOSITORY = 'http://pypi.python.org/pypi'
user_options = [
('repository=', 'r',
Modified: python/branches/py3k-struni/Lib/httplib.py
==============================================================================
--- python/branches/py3k-struni/Lib/httplib.py (original)
+++ python/branches/py3k-struni/Lib/httplib.py Tue Aug 7 01:33:07 2007
@@ -1129,6 +1129,9 @@
def __getattr__(self, attr):
return getattr(self._sock, attr)
+ def close(self):
+ SharedSocketClient.close(self)
+ self._ssl = None
class HTTPSConnection(HTTPConnection):
"This class allows communication via SSL."
Modified: python/branches/py3k-struni/Lib/runpy.py
==============================================================================
--- python/branches/py3k-struni/Lib/runpy.py (original)
+++ python/branches/py3k-struni/Lib/runpy.py Tue Aug 7 01:33:07 2007
@@ -33,36 +33,21 @@
return run_globals
def _run_module_code(code, init_globals=None,
- mod_name=None, mod_fname=None,
- mod_loader=None, alter_sys=False):
+ mod_name=None, mod_fname=None,
+ mod_loader=None, alter_sys=False):
"""Helper for run_module"""
# Set up the top level namespace dictionary
if alter_sys:
- # Modify sys.argv[0] and sys.module[mod_name]
- temp_module = imp.new_module(mod_name)
- mod_globals = temp_module.__dict__
- saved_argv0 = sys.argv[0]
- restore_module = mod_name in sys.modules
- if restore_module:
- saved_module = sys.modules[mod_name]
+ # Modify sys.argv[0] and sys.modules[mod_name]
sys.argv[0] = mod_fname
- sys.modules[mod_name] = temp_module
- try:
- _run_code(code, mod_globals, init_globals,
- mod_name, mod_fname, mod_loader)
- finally:
- sys.argv[0] = saved_argv0
- if restore_module:
- sys.modules[mod_name] = saved_module
- else:
- del sys.modules[mod_name]
- # Copy the globals of the temporary module, as they
- # may be cleared when the temporary module goes away
- return mod_globals.copy()
+ module = imp.new_module(mod_name)
+ sys.modules[mod_name] = module
+ mod_globals = module.__dict__
else:
# Leave the sys module alone
- return _run_code(code, {}, init_globals,
- mod_name, mod_fname, mod_loader)
+ mod_globals = {}
+ return _run_code(code, mod_globals, init_globals,
+ mod_name, mod_fname, mod_loader)
# This helper is needed due to a missing component in the PEP 302
@@ -84,10 +69,13 @@
"""
loader = get_loader(mod_name)
if loader is None:
- raise ImportError("No module named " + mod_name)
+ raise ImportError("No module named %s" % mod_name)
+ if loader.is_package(mod_name):
+ raise ImportError(("%s is a package and cannot " +
+ "be directly executed") % mod_name)
code = loader.get_code(mod_name)
if code is None:
- raise ImportError("No code object available for " + mod_name)
+ raise ImportError("No code object available for %s" % mod_name)
filename = _get_filename(loader, mod_name)
if run_name is None:
run_name = mod_name
Modified: python/branches/py3k-struni/Lib/smtpd.py
==============================================================================
--- python/branches/py3k-struni/Lib/smtpd.py (original)
+++ python/branches/py3k-struni/Lib/smtpd.py Tue Aug 7 01:33:07 2007
@@ -132,7 +132,7 @@
# Implementation of base class abstract method
def collect_incoming_data(self, data):
- self.__line.append(data)
+ self.__line.append(str(data, "utf8"))
# Implementation of base class abstract method
def found_terminator(self):
Modified: python/branches/py3k-struni/Lib/smtplib.py
==============================================================================
--- python/branches/py3k-struni/Lib/smtplib.py (original)
+++ python/branches/py3k-struni/Lib/smtplib.py Tue Aug 7 01:33:07 2007
@@ -344,11 +344,11 @@
self.file = self.sock.makefile('rb')
while 1:
line = self.file.readline()
- if line == '':
+ if not line:
self.close()
raise SMTPServerDisconnected("Connection unexpectedly closed")
if self.debuglevel > 0: print('reply:', repr(line), file=stderr)
- resp.append(line[4:].strip(b' \t\n'))
+ resp.append(line[4:].strip(b' \t\r\n'))
code=line[:3]
# Check that the error code is syntactically correct.
# Don't attempt to read a continuation line if it is broken.
@@ -358,7 +358,7 @@
errcode = -1
break
# Check if multiline response.
- if line[3:4]!="-":
+ if line[3:4] != b"-":
break
errmsg = b"\n".join(resp)
Modified: python/branches/py3k-struni/Lib/test/test_asynchat.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_asynchat.py (original)
+++ python/branches/py3k-struni/Lib/test/test_asynchat.py Tue Aug 7 01:33:07 2007
@@ -3,12 +3,17 @@
import thread # If this fails, we can't test this module
import asyncore, asynchat, socket, threading, time
import unittest
+import sys
from test import test_support
HOST = "127.0.0.1"
PORT = 54322
+SERVER_QUIT = b'QUIT\n'
class echo_server(threading.Thread):
+ # parameter to determine the number of bytes passed back to the
+ # client each send
+ chunk_size = 1
def run(self):
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
@@ -17,15 +22,28 @@
PORT = test_support.bind_port(sock, HOST, PORT)
sock.listen(1)
conn, client = sock.accept()
- buffer = b""
- while b"\n" not in buffer:
+ self.buffer = b""
+ # collect data until quit message is seen
+ while SERVER_QUIT not in self.buffer:
data = conn.recv(1)
if not data:
break
- buffer = buffer + data
- while buffer:
- n = conn.send(buffer)
- buffer = buffer[n:]
+ self.buffer = self.buffer + data
+
+ # remove the SERVER_QUIT message
+ self.buffer = self.buffer.replace(SERVER_QUIT, b'')
+
+ # re-send entire set of collected data
+ try:
+ # this may fail on some tests, such as test_close_when_done, since
+ # the client closes the channel when it's done sending
+ while self.buffer:
+ n = conn.send(self.buffer[:self.chunk_size])
+ time.sleep(0.001)
+ self.buffer = self.buffer[n:]
+ except:
+ pass
+
conn.close()
sock.close()
@@ -33,7 +51,7 @@
def __init__(self, terminator):
asynchat.async_chat.__init__(self)
- self.contents = None
+ self.contents = []
self.create_socket(socket.AF_INET, socket.SOCK_STREAM)
self.connect((HOST, PORT))
self.set_terminator(terminator)
@@ -41,53 +59,194 @@
def handle_connect(self):
pass
- ##print "Connected"
+
+ if sys.platform == 'darwin':
+ # select.poll returns a select.POLLHUP at the end of the tests
+ # on darwin, so just ignore it
+ def handle_expt(self):
+ pass
def collect_incoming_data(self, data):
- self.buffer = self.buffer + data
+ self.buffer += data
def found_terminator(self):
- #print "Received:", repr(self.buffer)
- self.contents = self.buffer
+ self.contents.append(self.buffer)
self.buffer = b""
- self.close()
class TestAsynchat(unittest.TestCase):
+ usepoll = False
+
def setUp (self):
pass
def tearDown (self):
pass
- def test_line_terminator(self):
+ def line_terminator_check(self, term, server_chunk):
+ s = echo_server()
+ s.chunk_size = server_chunk
+ s.start()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(term)
+ c.push(b"hello ")
+ c.push(bytes("world%s" % term))
+ c.push(bytes("I'm not dead yet!%s" % term))
+ c.push(SERVER_QUIT)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
+ s.join()
+
+ self.assertEqual(c.contents, [b"hello world", b"I'm not dead yet!"])
+
+ # the line terminator tests below check receiving variously-sized
+ # chunks back from the server in order to exercise all branches of
+ # async_chat.handle_read
+
+ def test_line_terminator1(self):
+ # test one-character terminator
+ for l in (1,2,3):
+ self.line_terminator_check(b'\n', l)
+
+ def test_line_terminator2(self):
+ # test two-character terminator
+ for l in (1,2,3):
+ self.line_terminator_check(b'\r\n', l)
+
+ def test_line_terminator3(self):
+ # test three-character terminator
+ for l in (1,2,3):
+ self.line_terminator_check(b'qqq', l)
+
+ def numeric_terminator_check(self, termlen):
+ # Try reading a fixed number of bytes
s = echo_server()
s.start()
- time.sleep(1) # Give server time to initialize
- c = echo_client('\n')
- c.push("hello ")
- c.push("world\n")
- asyncore.loop()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(termlen)
+ data = b"hello world, I'm not dead yet!\n"
+ c.push(data)
+ c.push(SERVER_QUIT)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
s.join()
- self.assertEqual(c.contents, b'hello world')
+ self.assertEqual(c.contents, [data[:termlen]])
+
+ def test_numeric_terminator1(self):
+ # check that ints & longs both work (since type is
+ # explicitly checked in async_chat.handle_read)
+ self.numeric_terminator_check(1)
- def test_numeric_terminator(self):
+ def test_numeric_terminator2(self):
+ self.numeric_terminator_check(6)
+
+ def test_none_terminator(self):
# Try reading a fixed number of bytes
s = echo_server()
s.start()
- time.sleep(1) # Give server time to initialize
- c = echo_client(6)
- c.push("hello ")
- c.push("world\n")
- asyncore.loop()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(None)
+ data = b"hello world, I'm not dead yet!\n"
+ c.push(data)
+ c.push(SERVER_QUIT)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
+ s.join()
+
+ self.assertEqual(c.contents, [])
+ self.assertEqual(c.buffer, data)
+
+ def test_simple_producer(self):
+ s = echo_server()
+ s.start()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(b'\n')
+ data = b"hello world\nI'm not dead yet!\n"
+ p = asynchat.simple_producer(data+SERVER_QUIT, buffer_size=8)
+ c.push_with_producer(p)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
+ s.join()
+
+ self.assertEqual(c.contents, [b"hello world", b"I'm not dead yet!"])
+
+ def test_string_producer(self):
+ s = echo_server()
+ s.start()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(b'\n')
+ data = b"hello world\nI'm not dead yet!\n"
+ c.push_with_producer(data+SERVER_QUIT)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
+ s.join()
+
+ self.assertEqual(c.contents, [b"hello world", b"I'm not dead yet!"])
+
+ def test_empty_line(self):
+ # checks that empty lines are handled correctly
+ s = echo_server()
+ s.start()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(b'\n')
+ c.push("hello world\n\nI'm not dead yet!\n")
+ c.push(SERVER_QUIT)
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
+ s.join()
+
+ self.assertEqual(c.contents,
+ [b"hello world", b"", b"I'm not dead yet!"])
+
+ def test_close_when_done(self):
+ s = echo_server()
+ s.start()
+ time.sleep(0.5) # Give server time to initialize
+ c = echo_client(b'\n')
+ c.push("hello world\nI'm not dead yet!\n")
+ c.push(SERVER_QUIT)
+ c.close_when_done()
+ asyncore.loop(use_poll=self.usepoll, count=300, timeout=.01)
s.join()
- self.assertEqual(c.contents, b'hello ')
+ self.assertEqual(c.contents, [])
+ # the server might have been able to send a byte or two back, but this
+ # at least checks that it received something and didn't just fail
+ # (which could still result in the client not having received anything)
+ self.assertTrue(len(s.buffer) > 0)
+
+
+class TestAsynchat_WithPoll(TestAsynchat):
+ usepoll = True
+
+class TestHelperFunctions(unittest.TestCase):
+ def test_find_prefix_at_end(self):
+ self.assertEqual(asynchat.find_prefix_at_end("qwerty\r", "\r\n"), 1)
+ self.assertEqual(asynchat.find_prefix_at_end("qwertydkjf", "\r\n"), 0)
+
+class TestFifo(unittest.TestCase):
+ def test_basic(self):
+ f = asynchat.fifo()
+ f.push(7)
+ f.push(b'a')
+ self.assertEqual(len(f), 2)
+ self.assertEqual(f.first(), 7)
+ self.assertEqual(f.pop(), (1, 7))
+ self.assertEqual(len(f), 1)
+ self.assertEqual(f.first(), b'a')
+ self.assertEqual(f.is_empty(), False)
+ self.assertEqual(f.pop(), (1, b'a'))
+ self.assertEqual(len(f), 0)
+ self.assertEqual(f.is_empty(), True)
+ self.assertEqual(f.pop(), (0, None))
+
+ def test_given_list(self):
+ f = asynchat.fifo([b'x', 17, 3])
+ self.assertEqual(len(f), 3)
+ self.assertEqual(f.pop(), (1, b'x'))
+ self.assertEqual(f.pop(), (1, 17))
+ self.assertEqual(f.pop(), (1, 3))
+ self.assertEqual(f.pop(), (0, None))
def test_main(verbose=None):
- test_support.run_unittest(TestAsynchat)
+ test_support.run_unittest(TestAsynchat, TestAsynchat_WithPoll,
+ TestHelperFunctions, TestFifo)
if __name__ == "__main__":
test_main(verbose=True)
Modified: python/branches/py3k-struni/Lib/test/test_asyncore.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_asyncore.py (original)
+++ python/branches/py3k-struni/Lib/test/test_asyncore.py Tue Aug 7 01:33:07 2007
@@ -12,7 +12,7 @@
from io import StringIO, BytesIO
HOST = "127.0.0.1"
-PORT = 54329
+PORT = None
class dummysocket:
def __init__(self):
@@ -53,12 +53,14 @@
# used when testing senders; just collects what it gets until newline is sent
def capture_server(evt, buf):
- serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- serv.settimeout(3)
- serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
- serv.bind(("", PORT))
- serv.listen(5)
try:
+ serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+ serv.settimeout(3)
+ serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+ serv.bind(("", 0))
+ global PORT
+ PORT = serv.getsockname()[1]
+ serv.listen(5)
conn, addr = serv.accept()
except socket.timeout:
pass
@@ -79,6 +81,7 @@
conn.close()
finally:
serv.close()
+ PORT = None
evt.set()
@@ -107,87 +110,83 @@
asyncore._exception(tr2)
self.assertEqual(tr2.error_handled, True)
-## Commented out these tests because test a non-documented function
-## (which is actually public, why it's not documented?). Anyway, the
-## tests *and* the function uses constants in the select module that
-## are not present in Windows systems (see this thread:
-## http://mail.python.org/pipermail/python-list/2001-October/109973.html)
-## Note even that these constants are mentioned in the select
-## documentation, as a parameter of "poll" method "register", but are
-## not explicit declared as constants of the module.
-## . Facundo Batista
-##
-## def test_readwrite(self):
-## # Check that correct methods are called by readwrite()
-##
-## class testobj:
-## def __init__(self):
-## self.read = False
-## self.write = False
-## self.expt = False
-##
-## def handle_read_event(self):
-## self.read = True
-##
-## def handle_write_event(self):
-## self.write = True
-##
-## def handle_expt_event(self):
-## self.expt = True
-##
-## def handle_error(self):
-## self.error_handled = True
-##
-## for flag in (select.POLLIN, select.POLLPRI):
-## tobj = testobj()
-## self.assertEqual(tobj.read, False)
-## asyncore.readwrite(tobj, flag)
-## self.assertEqual(tobj.read, True)
-##
-## # check that ExitNow exceptions in the object handler method
-## # bubbles all the way up through asyncore readwrite call
-## tr1 = exitingdummy()
-## self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1, flag)
-##
-## # check that an exception other than ExitNow in the object handler
-## # method causes the handle_error method to get called
-## tr2 = crashingdummy()
-## asyncore.readwrite(tr2, flag)
-## self.assertEqual(tr2.error_handled, True)
-##
-## tobj = testobj()
-## self.assertEqual(tobj.write, False)
-## asyncore.readwrite(tobj, select.POLLOUT)
-## self.assertEqual(tobj.write, True)
-##
-## # check that ExitNow exceptions in the object handler method
-## # bubbles all the way up through asyncore readwrite call
-## tr1 = exitingdummy()
-## self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1,
-## select.POLLOUT)
-##
-## # check that an exception other than ExitNow in the object handler
-## # method causes the handle_error method to get called
-## tr2 = crashingdummy()
-## asyncore.readwrite(tr2, select.POLLOUT)
-## self.assertEqual(tr2.error_handled, True)
-##
-## for flag in (select.POLLERR, select.POLLHUP, select.POLLNVAL):
-## tobj = testobj()
-## self.assertEqual(tobj.expt, False)
-## asyncore.readwrite(tobj, flag)
-## self.assertEqual(tobj.expt, True)
-##
-## # check that ExitNow exceptions in the object handler method
-## # bubbles all the way up through asyncore readwrite calls
-## tr1 = exitingdummy()
-## self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1, flag)
-##
-## # check that an exception other than ExitNow in the object handler
-## # method causes the handle_error method to get called
-## tr2 = crashingdummy()
-## asyncore.readwrite(tr2, flag)
-## self.assertEqual(tr2.error_handled, True)
+ # asyncore.readwrite uses constants in the select module that
+ # are not present in Windows systems (see this thread:
+ # http://mail.python.org/pipermail/python-list/2001-October/109973.html)
+ # These constants should be present as long as poll is available
+
+ if hasattr(select, 'poll'):
+ def test_readwrite(self):
+ # Check that correct methods are called by readwrite()
+
+ class testobj:
+ def __init__(self):
+ self.read = False
+ self.write = False
+ self.expt = False
+
+ def handle_read_event(self):
+ self.read = True
+
+ def handle_write_event(self):
+ self.write = True
+
+ def handle_expt_event(self):
+ self.expt = True
+
+ def handle_error(self):
+ self.error_handled = True
+
+ for flag in (select.POLLIN, select.POLLPRI):
+ tobj = testobj()
+ self.assertEqual(tobj.read, False)
+ asyncore.readwrite(tobj, flag)
+ self.assertEqual(tobj.read, True)
+
+ # check that ExitNow exceptions in the object handler method
+ # bubbles all the way up through asyncore readwrite call
+ tr1 = exitingdummy()
+ self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1, flag)
+
+ # check that an exception other than ExitNow in the object handler
+ # method causes the handle_error method to get called
+ tr2 = crashingdummy()
+ asyncore.readwrite(tr2, flag)
+ self.assertEqual(tr2.error_handled, True)
+
+ tobj = testobj()
+ self.assertEqual(tobj.write, False)
+ asyncore.readwrite(tobj, select.POLLOUT)
+ self.assertEqual(tobj.write, True)
+
+ # check that ExitNow exceptions in the object handler method
+ # bubbles all the way up through asyncore readwrite call
+ tr1 = exitingdummy()
+ self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1,
+ select.POLLOUT)
+
+ # check that an exception other than ExitNow in the object handler
+ # method causes the handle_error method to get called
+ tr2 = crashingdummy()
+ asyncore.readwrite(tr2, select.POLLOUT)
+ self.assertEqual(tr2.error_handled, True)
+
+ for flag in (select.POLLERR, select.POLLHUP, select.POLLNVAL):
+ tobj = testobj()
+ self.assertEqual(tobj.expt, False)
+ asyncore.readwrite(tobj, flag)
+ self.assertEqual(tobj.expt, True)
+
+ # check that ExitNow exceptions in the object handler method
+ # bubbles all the way up through asyncore readwrite calls
+ tr1 = exitingdummy()
+ self.assertRaises(asyncore.ExitNow, asyncore.readwrite, tr1, flag)
+
+ # check that an exception other than ExitNow in the object handler
+ # method causes the handle_error method to get called
+ tr2 = crashingdummy()
+ asyncore.readwrite(tr2, flag)
+ self.assertEqual(tr2.error_handled, True)
def test_closeall(self):
self.closeall_check(False)
@@ -343,12 +342,26 @@
self.evt = threading.Event()
cap = BytesIO()
threading.Thread(target=capture_server, args=(self.evt, cap)).start()
- time.sleep(1) # Give server time to initialize
- data = b"Suppose there isn't a 16-ton weight?"*5
+ # wait until server thread has assigned a port number
+ n = 1000
+ while PORT is None and n > 0:
+ time.sleep(0.01)
+ n -= 1
+
+ # wait a little longer for the server to initialize (it sometimes
+ # refuses connections on slow machines without this wait)
+ time.sleep(0.2)
+
+ data = b"Suppose there isn't a 16-ton weight?"
d = dispatcherwithsend_noread()
d.create_socket(socket.AF_INET, socket.SOCK_STREAM)
d.connect((HOST, PORT))
+
+ # give time for socket to connect
+ time.sleep(0.1)
+
+ d.send(data)
d.send(data)
d.send(b'\n')
@@ -359,7 +372,7 @@
self.evt.wait()
- self.assertEqual(cap.getvalue(), data)
+ self.assertEqual(cap.getvalue(), data*2)
class DispatcherWithSendTests_UsePoll(DispatcherWithSendTests):
Modified: python/branches/py3k-struni/Lib/test/test_codecmaps_cn.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_codecmaps_cn.py (original)
+++ python/branches/py3k-struni/Lib/test/test_codecmaps_cn.py Tue Aug 7 01:33:07 2007
@@ -19,6 +19,13 @@
mapfileurl = 'http://www.unicode.org/Public/MAPPINGS/VENDORS/' \
'MICSFT/WINDOWS/CP936.TXT'
+class TestGB18030Map(test_multibytecodec_support.TestBase_Mapping,
+ unittest.TestCase):
+ encoding = 'gb18030'
+ mapfileurl = 'http://source.icu-project.org/repos/icu/data/' \
+ 'trunk/charset/data/xml/gb-18030-2000.xml'
+
+
def test_main():
test_support.run_unittest(__name__)
Modified: python/branches/py3k-struni/Lib/test/test_math.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_math.py (original)
+++ python/branches/py3k-struni/Lib/test/test_math.py Tue Aug 7 01:33:07 2007
@@ -12,7 +12,11 @@
def ftest(self, name, value, expected):
if abs(value-expected) > eps:
- self.fail('%s returned %f, expected %f'%\
+ # Use %r instead of %f so the error message
+ # displays full precision. Otherwise discrepancies
+ # in the last few bits will lead to very confusing
+ # error messages
+ self.fail('%s returned %r, expected %r' %
(name, value, expected))
def testConstants(self):
@@ -92,6 +96,10 @@
self.ftest('floor(-0.5)', math.floor(-0.5), -1)
self.ftest('floor(-1.0)', math.floor(-1.0), -1)
self.ftest('floor(-1.5)', math.floor(-1.5), -2)
+ # pow() relies on floor() to check for integers
+ # This fails on some platforms - so check it here
+ self.ftest('floor(1.23e167)', math.floor(1.23e167), 1.23e167)
+ self.ftest('floor(-1.23e167)', math.floor(-1.23e167), -1.23e167)
def testFmod(self):
self.assertRaises(TypeError, math.fmod)
Modified: python/branches/py3k-struni/Lib/test/test_multibytecodec_support.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_multibytecodec_support.py (original)
+++ python/branches/py3k-struni/Lib/test/test_multibytecodec_support.py Tue Aug 7 01:33:07 2007
@@ -5,7 +5,7 @@
#
import sys, codecs, os.path
-import unittest
+import unittest, re
from test import test_support
from io import BytesIO
@@ -272,6 +272,12 @@
return test_support.open_urlresource(self.mapfileurl)
def test_mapping_file(self):
+ if self.mapfileurl.endswith('.xml'):
+ self._test_mapping_file_ucm()
+ else:
+ self._test_mapping_file_plain()
+
+ def _test_mapping_file_plain(self):
unichrs = lambda s: ''.join(map(chr, map(eval, s.split('+'))))
urt_wa = {}
@@ -303,6 +309,14 @@
self._testpoint(csetch, unich)
+ def _test_mapping_file_ucm(self):
+ ucmdata = self.open_mapping_file().read()
+ uc = re.findall('<a u="([A-F0-9]{4})" b="([0-9A-F ]+)"/>', ucmdata)
+ for uni, coded in uc:
+ unich = chr(int(uni, 16))
+ codech = bytes(int(c, 16) for c in coded.split())
+ self._testpoint(codech, unich)
+
def test_mapping_supplemental(self):
for mapping in self.supmaps:
self._testpoint(*mapping)
Modified: python/branches/py3k-struni/Lib/test/test_pow.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_pow.py (original)
+++ python/branches/py3k-struni/Lib/test/test_pow.py Tue Aug 7 01:33:07 2007
@@ -106,6 +106,9 @@
# platform pow() was buggy, and Python didn't worm around it.
eq = self.assertEquals
a = -1.0
+ # The next two tests can still fail if the platform floor()
+ # function doesn't treat all large inputs as integers
+ # test_math should also fail if that is happening
eq(pow(a, 1.23e167), 1.0)
eq(pow(a, -1.23e167), 1.0)
for b in range(-10, 11):
Modified: python/branches/py3k-struni/Lib/test/test_resource.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_resource.py (original)
+++ python/branches/py3k-struni/Lib/test/test_resource.py Tue Aug 7 01:33:07 2007
@@ -49,17 +49,24 @@
except ValueError:
limit_set = False
f = open(test_support.TESTFN, "wb")
- f.write("X" * 1024)
try:
- f.write("Y")
- f.flush()
- except IOError:
- if not limit_set:
- raise
- f.close()
- os.unlink(test_support.TESTFN)
+ f.write("X" * 1024)
+ try:
+ f.write("Y")
+ f.flush()
+ except IOError:
+ if not limit_set:
+ raise
+ if limit_set:
+ # Close will attempt to flush the byte we wrote
+ # Restore limit first to avoid getting a spurious error
+ resource.setrlimit(resource.RLIMIT_FSIZE, (cur, max))
+ finally:
+ f.close()
+ os.unlink(test_support.TESTFN)
finally:
- resource.setrlimit(resource.RLIMIT_FSIZE, (cur, max))
+ if limit_set:
+ resource.setrlimit(resource.RLIMIT_FSIZE, (cur, max))
def test_fsize_toobig(self):
# Be sure that setrlimit is checking for really large values
Modified: python/branches/py3k-struni/Lib/test/test_runpy.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_runpy.py (original)
+++ python/branches/py3k-struni/Lib/test/test_runpy.py Tue Aug 7 01:33:07 2007
@@ -21,12 +21,12 @@
"# Check the sys module\n"
"import sys\n"
"run_argv0 = sys.argv[0]\n"
- "if __name__ in sys.modules:\n"
- " run_name = sys.modules[__name__].__name__\n"
+ "run_name_in_sys_modules = __name__ in sys.modules\n"
+ "if run_name_in_sys_modules:\n"
+ " module_in_sys_modules = globals() is sys.modules[__name__].__dict__\n"
"# Check nested operation\n"
"import runpy\n"
- "nested = runpy._run_module_code('x=1\\n', mod_name='<run>',\n"
- " alter_sys=True)\n"
+ "nested = runpy._run_module_code('x=1\\n', mod_name='<run>')\n"
)
@@ -37,34 +37,44 @@
loader = "Now you're just being silly"
d1 = dict(initial=initial)
saved_argv0 = sys.argv[0]
- d2 = _run_module_code(self.test_source,
- d1,
- name,
- file,
- loader,
- True)
- self.failUnless("result" not in d1)
- self.failUnless(d2["initial"] is initial)
- self.assertEqual(d2["result"], self.expected_result)
- self.assertEqual(d2["nested"]["x"], 1)
- self.failUnless(d2["__name__"] is name)
- self.failUnless(d2["run_name"] is name)
- self.failUnless(d2["__file__"] is file)
- self.failUnless(d2["run_argv0"] is file)
- self.failUnless(d2["__loader__"] is loader)
- self.failUnless(sys.argv[0] is saved_argv0)
- self.failUnless(name not in sys.modules)
+ try:
+ d2 = _run_module_code(self.test_source,
+ d1,
+ name,
+ file,
+ loader,
+ alter_sys=True)
+ self.failUnless("result" not in d1)
+ self.failUnless(d2["initial"] is initial)
+ self.assertEqual(d2["result"], self.expected_result)
+ self.assertEqual(d2["nested"]["x"], 1)
+ self.assertEqual(d2["nested"]["__name__"], "<run>")
+ self.failUnless(d2["__name__"] is name)
+ self.failUnless(d2["__file__"] is file)
+ self.failUnless(d2["__loader__"] is loader)
+ self.failUnless(d2["run_argv0"] is file)
+ self.failUnless(d2["run_name_in_sys_modules"])
+ self.failUnless(d2["module_in_sys_modules"])
+ self.failUnless(sys.argv[0] is not saved_argv0)
+ self.failUnless(name in sys.modules)
+ finally:
+ sys.argv[0] = saved_argv0
+ if name in sys.modules:
+ del sys.modules[name]
def test_run_module_code_defaults(self):
saved_argv0 = sys.argv[0]
d = _run_module_code(self.test_source)
self.assertEqual(d["result"], self.expected_result)
+ self.failUnless(d["nested"]["x"] == 1)
+ self.failUnless(d["nested"]["__name__"] == "<run>")
self.failUnless(d["__name__"] is None)
self.failUnless(d["__file__"] is None)
self.failUnless(d["__loader__"] is None)
self.failUnless(d["run_argv0"] is saved_argv0)
- self.failUnless("run_name" not in d)
+ self.failUnless(not d["run_name_in_sys_modules"])
self.failUnless(sys.argv[0] is saved_argv0)
+ self.failUnless(None not in sys.modules)
class RunModuleTest(unittest.TestCase):
@@ -77,19 +87,29 @@
self.fail("Expected import error for " + mod_name)
def test_invalid_names(self):
+ # Builtin module
self.expect_import_error("sys")
+ # Non-existent modules
self.expect_import_error("sys.imp.eric")
self.expect_import_error("os.path.half")
self.expect_import_error("a.bee")
self.expect_import_error(".howard")
self.expect_import_error("..eaten")
+ # Package
+ self.expect_import_error("logging")
def test_library_module(self):
run_module("runpy")
+ def _add_pkg_dir(self, pkg_dir):
+ os.mkdir(pkg_dir)
+ pkg_fname = os.path.join(pkg_dir, "__init__"+os.extsep+"py")
+ pkg_file = open(pkg_fname, "w")
+ pkg_file.close()
+ return pkg_fname
+
def _make_pkg(self, source, depth):
pkg_name = "__runpy_pkg__"
- init_fname = "__init__"+os.extsep+"py"
test_fname = "runpy_test"+os.extsep+"py"
pkg_dir = sub_dir = tempfile.mkdtemp()
if verbose: print(" Package tree in:", sub_dir)
@@ -97,11 +117,8 @@
if verbose: print(" Updated sys.path:", sys.path[0])
for i in range(depth):
sub_dir = os.path.join(sub_dir, pkg_name)
- os.mkdir(sub_dir)
+ pkg_fname = self._add_pkg_dir(sub_dir)
if verbose: print(" Next level in:", sub_dir)
- pkg_fname = os.path.join(sub_dir, init_fname)
- pkg_file = open(pkg_fname, "w")
- pkg_file.close()
if verbose: print(" Created:", pkg_fname)
mod_fname = os.path.join(sub_dir, test_fname)
mod_file = open(mod_fname, "w")
@@ -112,13 +129,9 @@
return pkg_dir, mod_fname, mod_name
def _del_pkg(self, top, depth, mod_name):
- for i in range(depth+1): # Don't forget the module itself
- parts = mod_name.rsplit(".", i)
- entry = parts[0]
- try:
+ for entry in list(sys.modules):
+ if entry.startswith("__runpy_pkg__"):
del sys.modules[entry]
- except KeyError as ex:
- if verbose: print(ex) # Persist with cleaning up
if verbose: print(" Removed sys.modules entries")
del sys.path[0]
if verbose: print(" Removed sys.path entry")
@@ -146,23 +159,81 @@
try:
if verbose: print("Running from source:", mod_name)
d1 = run_module(mod_name) # Read from source
+ self.failUnless("x" in d1)
self.assertEqual(d1["x"], 1)
del d1 # Ensure __loader__ entry doesn't keep file open
__import__(mod_name)
os.remove(mod_fname)
if verbose: print("Running from compiled:", mod_name)
d2 = run_module(mod_name) # Read from bytecode
+ self.failUnless("x" in d2)
self.assertEqual(d2["x"], 1)
del d2 # Ensure __loader__ entry doesn't keep file open
finally:
self._del_pkg(pkg_dir, depth, mod_name)
if verbose: print("Module executed successfully")
+ def _add_relative_modules(self, base_dir, depth):
+ if depth <= 1:
+ raise ValueError("Relative module test needs depth > 1")
+ pkg_name = "__runpy_pkg__"
+ module_dir = base_dir
+ for i in range(depth):
+ parent_dir = module_dir
+ module_dir = os.path.join(module_dir, pkg_name)
+ # Add sibling module
+ sibling_fname = os.path.join(module_dir, "sibling"+os.extsep+"py")
+ sibling_file = open(sibling_fname, "w")
+ sibling_file.close()
+ if verbose: print(" Added sibling module:", sibling_fname)
+ # Add nephew module
+ uncle_dir = os.path.join(parent_dir, "uncle")
+ self._add_pkg_dir(uncle_dir)
+ if verbose: print(" Added uncle package:", uncle_dir)
+ cousin_dir = os.path.join(uncle_dir, "cousin")
+ self._add_pkg_dir(cousin_dir)
+ if verbose: print(" Added cousin package:", cousin_dir)
+ nephew_fname = os.path.join(cousin_dir, "nephew"+os.extsep+"py")
+ nephew_file = open(nephew_fname, "w")
+ nephew_file.close()
+ if verbose: print(" Added nephew module:", nephew_fname)
+
+ def _check_relative_imports(self, depth, run_name=None):
+ contents = """\
+from __future__ import absolute_import
+from . import sibling
+from ..uncle.cousin import nephew
+"""
+ pkg_dir, mod_fname, mod_name = (
+ self._make_pkg(contents, depth))
+ try:
+ self._add_relative_modules(pkg_dir, depth)
+ if verbose: print("Running from source:", mod_name)
+ d1 = run_module(mod_name) # Read from source
+ self.failUnless("sibling" in d1)
+ self.failUnless("nephew" in d1)
+ del d1 # Ensure __loader__ entry doesn't keep file open
+ __import__(mod_name)
+ os.remove(mod_fname)
+ if verbose: print("Running from compiled:", mod_name)
+ d2 = run_module(mod_name) # Read from bytecode
+ self.failUnless("sibling" in d2)
+ self.failUnless("nephew" in d2)
+ del d2 # Ensure __loader__ entry doesn't keep file open
+ finally:
+ self._del_pkg(pkg_dir, depth, mod_name)
+ if verbose: print("Module executed successfully")
+
def test_run_module(self):
for depth in range(4):
if verbose: print("Testing package depth:", depth)
self._check_module(depth)
+ def test_explicit_relative_import(self):
+ for depth in range(2, 5):
+ if verbose: print("Testing relative imports at depth:", depth)
+ self._check_relative_imports(depth)
+
def test_main():
run_unittest(RunModuleCodeTest)
Modified: python/branches/py3k-struni/Lib/test/test_smtplib.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_smtplib.py (original)
+++ python/branches/py3k-struni/Lib/test/test_smtplib.py Tue Aug 7 01:33:07 2007
@@ -1,53 +1,100 @@
+import asyncore
import socket
import threading
+import smtpd
import smtplib
+import io
+import sys
import time
+import select
from unittest import TestCase
from test import test_support
+# PORT is used to communicate the port number assigned to the server
+# to the test client
+HOST = "localhost"
+PORT = None
-def server(evt):
- serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- serv.settimeout(3)
- serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
- serv.bind(("", 9091))
- serv.listen(5)
+def server(evt, buf):
try:
+ serv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+ serv.settimeout(3)
+ serv.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+ serv.bind(("", 0))
+ global PORT
+ PORT = serv.getsockname()[1]
+ serv.listen(5)
conn, addr = serv.accept()
except socket.timeout:
pass
else:
- conn.send("220 Hola mundo\n")
+ n = 500
+ while buf and n > 0:
+ r, w, e = select.select([], [conn], [])
+ if w:
+ sent = conn.send(buf)
+ buf = buf[sent:]
+
+ n -= 1
+ time.sleep(0.01)
+
conn.close()
finally:
serv.close()
+ PORT = None
evt.set()
class GeneralTests(TestCase):
def setUp(self):
self.evt = threading.Event()
- threading.Thread(target=server, args=(self.evt,)).start()
- time.sleep(.1)
+ servargs = (self.evt, "220 Hola mundo\n")
+ threading.Thread(target=server, args=servargs).start()
+
+ # wait until server thread has assigned a port number
+ n = 500
+ while PORT is None and n > 0:
+ time.sleep(0.01)
+ n -= 1
+
+ # wait a little longer (sometimes connections are refused
+ # on slow machines without this additional wait)
+ time.sleep(0.5)
def tearDown(self):
self.evt.wait()
- def testBasic(self):
+ def testBasic1(self):
# connects
- smtp = smtplib.SMTP("localhost", 9091)
+ smtp = smtplib.SMTP(HOST, PORT)
smtp.sock.close()
+ def testBasic2(self):
+ # connects, include port in host name
+ smtp = smtplib.SMTP("%s:%s" % (HOST, PORT))
+ smtp.sock.close()
+
+ def testLocalHostName(self):
+ # check that supplied local_hostname is used
+ smtp = smtplib.SMTP(HOST, PORT, local_hostname="testhost")
+ self.assertEqual(smtp.local_hostname, "testhost")
+ smtp.sock.close()
+
+ def testNonnumericPort(self):
+ # check that non-numeric port raises ValueError
+ self.assertRaises(socket.error, smtplib.SMTP,
+ "localhost", "bogus")
+
def testTimeoutDefault(self):
# default
- smtp = smtplib.SMTP("localhost", 9091)
+ smtp = smtplib.SMTP(HOST, PORT)
self.assertTrue(smtp.sock.gettimeout() is None)
smtp.sock.close()
def testTimeoutValue(self):
# a value
- smtp = smtplib.SMTP("localhost", 9091, timeout=30)
+ smtp = smtplib.SMTP(HOST, PORT, timeout=30)
self.assertEqual(smtp.sock.gettimeout(), 30)
smtp.sock.close()
@@ -56,16 +103,149 @@
previous = socket.getdefaulttimeout()
socket.setdefaulttimeout(30)
try:
- smtp = smtplib.SMTP("localhost", 9091, timeout=None)
+ smtp = smtplib.SMTP(HOST, PORT, timeout=None)
finally:
socket.setdefaulttimeout(previous)
self.assertEqual(smtp.sock.gettimeout(), 30)
smtp.sock.close()
+# Test server using smtpd.DebuggingServer
+def debugging_server(serv_evt, client_evt):
+ serv = smtpd.DebuggingServer(("", 0), ('nowhere', -1))
+ global PORT
+ PORT = serv.getsockname()[1]
+
+ try:
+ if hasattr(select, 'poll'):
+ poll_fun = asyncore.poll2
+ else:
+ poll_fun = asyncore.poll
+
+ n = 1000
+ while asyncore.socket_map and n > 0:
+ poll_fun(0.01, asyncore.socket_map)
+
+ # when the client conversation is finished, it will
+ # set client_evt, and it's then ok to kill the server
+ if client_evt.isSet():
+ serv.close()
+ break
+
+ n -= 1
+
+ except socket.timeout:
+ pass
+ finally:
+ # allow some time for the client to read the result
+ time.sleep(0.5)
+ serv.close()
+ asyncore.close_all()
+ PORT = None
+ time.sleep(0.5)
+ serv_evt.set()
+
+MSG_BEGIN = '---------- MESSAGE FOLLOWS ----------\n'
+MSG_END = '------------ END MESSAGE ------------\n'
+
+# Test behavior of smtpd.DebuggingServer
+# NOTE: the SMTP objects are created with a non-default local_hostname
+# argument to the constructor, since (on some systems) the FQDN lookup
+# caused by the default local_hostname sometimes takes so long that the
+# test server times out, causing the test to fail.
+class DebuggingServerTests(TestCase):
+
+ def setUp(self):
+ # temporarily replace sys.stdout to capture DebuggingServer output
+ self.old_stdout = sys.stdout
+ self.output = io.StringIO()
+ sys.stdout = self.output
+
+ self.serv_evt = threading.Event()
+ self.client_evt = threading.Event()
+ serv_args = (self.serv_evt, self.client_evt)
+ threading.Thread(target=debugging_server, args=serv_args).start()
+
+ # wait until server thread has assigned a port number
+ n = 500
+ while PORT is None and n > 0:
+ time.sleep(0.01)
+ n -= 1
+
+ # wait a little longer (sometimes connections are refused
+ # on slow machines without this additional wait)
+ time.sleep(0.5)
+
+ def tearDown(self):
+ # indicate that the client is finished
+ self.client_evt.set()
+ # wait for the server thread to terminate
+ self.serv_evt.wait()
+ # restore sys.stdout
+ sys.stdout = self.old_stdout
+
+ def testBasic(self):
+ # connect
+ smtp = smtplib.SMTP(HOST, PORT, local_hostname='localhost', timeout=3)
+ smtp.quit()
+
+ def testEHLO(self):
+ smtp = smtplib.SMTP(HOST, PORT, local_hostname='localhost', timeout=3)
+ expected = (502, b'Error: command "EHLO" not implemented')
+ self.assertEqual(smtp.ehlo(), expected)
+ smtp.quit()
+
+ def testHELP(self):
+ smtp = smtplib.SMTP(HOST, PORT, local_hostname='localhost', timeout=3)
+ self.assertEqual(smtp.help(), b'Error: command "HELP" not implemented')
+ smtp.quit()
+
+ def testSend(self):
+ # connect and send mail
+ m = 'A test message'
+ smtp = smtplib.SMTP(HOST, PORT, local_hostname='localhost', timeout=3)
+ smtp.sendmail('John', 'Sally', m)
+ smtp.quit()
+
+ self.client_evt.set()
+ self.serv_evt.wait()
+ self.output.flush()
+ mexpect = '%s%s\n%s' % (MSG_BEGIN, m, MSG_END)
+ self.assertEqual(self.output.getvalue(), mexpect)
+
+
+class BadHELOServerTests(TestCase):
+
+ def setUp(self):
+ self.old_stdout = sys.stdout
+ self.output = io.StringIO()
+ sys.stdout = self.output
+
+ self.evt = threading.Event()
+ servargs = (self.evt, b"199 no hello for you!\n")
+ threading.Thread(target=server, args=servargs).start()
+
+ # wait until server thread has assigned a port number
+ n = 500
+ while PORT is None and n > 0:
+ time.sleep(0.01)
+ n -= 1
+
+ # wait a little longer (sometimes connections are refused
+ # on slow machines without this additional wait)
+ time.sleep(0.5)
+
+ def tearDown(self):
+ self.evt.wait()
+ sys.stdout = self.old_stdout
+
+ def testFailingHELO(self):
+ self.assertRaises(smtplib.SMTPConnectError, smtplib.SMTP,
+ HOST, PORT, 'localhost', 3)
def test_main(verbose=None):
- test_support.run_unittest(GeneralTests)
+ test_support.run_unittest(GeneralTests, DebuggingServerTests,
+ BadHELOServerTests)
if __name__ == '__main__':
test_main()
Modified: python/branches/py3k-struni/Lib/test/test_socket_ssl.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_socket_ssl.py (original)
+++ python/branches/py3k-struni/Lib/test/test_socket_ssl.py Tue Aug 7 01:33:07 2007
@@ -106,6 +106,25 @@
connector()
t.join()
+ def test_978833(self):
+ if test_support.verbose:
+ print("test_978833 ...")
+
+ import os, httplib
+ with test_support.transient_internet():
+ s = socket.socket(socket.AF_INET)
+ s.connect(("www.sf.net", 443))
+ fd = s.fileno()
+ sock = httplib.FakeSocket(s, socket.ssl(s))
+ s = None
+ sock.close()
+ try:
+ os.fstat(fd)
+ except OSError:
+ pass
+ else:
+ raise test_support.TestFailed("Failed to close socket")
+
class OpenSSLTests(unittest.TestCase):
def testBasic(self):
Modified: python/branches/py3k-struni/Lib/test/test_unicodedata.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_unicodedata.py (original)
+++ python/branches/py3k-struni/Lib/test/test_unicodedata.py Tue Aug 7 01:33:07 2007
@@ -214,6 +214,9 @@
count += 1
self.assert_(count >= 10) # should have tested at least the ASCII digits
+ def test_bug_1704793(self):
+ self.assertEquals(self.db.lookup("GOTHIC LETTER FAIHU"), '\U00010346')
+
def test_main():
test.test_support.run_unittest(
UnicodeMiscTest,
Modified: python/branches/py3k-struni/Lib/test/test_urllib2_localnet.py
==============================================================================
--- python/branches/py3k-struni/Lib/test/test_urllib2_localnet.py (original)
+++ python/branches/py3k-struni/Lib/test/test_urllib2_localnet.py Tue Aug 7 01:33:07 2007
@@ -40,14 +40,16 @@
class LoopbackHttpServerThread(threading.Thread):
"""Stoppable thread that runs a loopback http server."""
- def __init__(self, port, RequestHandlerClass):
+ def __init__(self, request_handler):
threading.Thread.__init__(self)
- self._RequestHandlerClass = RequestHandlerClass
self._stop = False
- self._port = port
- self._server_address = ('127.0.0.1', self._port)
self.ready = threading.Event()
- self.error = None
+ request_handler.protocol_version = "HTTP/1.0"
+ self.httpd = LoopbackHttpServer(('127.0.0.1', 0),
+ request_handler)
+ #print "Serving HTTP on %s port %s" % (self.httpd.server_name,
+ # self.httpd.server_port)
+ self.port = self.httpd.server_port
def stop(self):
"""Stops the webserver if it's currently running."""
@@ -58,24 +60,9 @@
self.join()
def run(self):
- protocol = "HTTP/1.0"
-
- try:
- self._RequestHandlerClass.protocol_version = protocol
- httpd = LoopbackHttpServer(self._server_address,
- self._RequestHandlerClass)
-
- sa = httpd.socket.getsockname()
- #print "Serving HTTP on", sa[0], "port", sa[1], "..."
- except:
- # Fail "gracefully" if we are unable to start.
- self.ready.set()
- self.error = sys.exc_info()[1]
- raise
-
self.ready.set()
while not self._stop:
- httpd.handle_request()
+ self.httpd.handle_request()
# Authentication infrastructure
@@ -232,26 +219,21 @@
class ProxyAuthTests(unittest.TestCase):
URL = "http://www.foo.com"
- PORT = 8080
USER = "tester"
PASSWD = "test123"
REALM = "TestRealm"
- PROXY_URL = "http://127.0.0.1:%d" % PORT
-
def setUp(self):
FakeProxyHandler.digest_auth_handler.set_users({
self.USER : self.PASSWD
})
FakeProxyHandler.digest_auth_handler.set_realm(self.REALM)
- self.server = LoopbackHttpServerThread(self.PORT, FakeProxyHandler)
+ self.server = LoopbackHttpServerThread(FakeProxyHandler)
self.server.start()
self.server.ready.wait()
- if self.server.error:
- raise self.server.error
-
- handler = urllib2.ProxyHandler({"http" : self.PROXY_URL})
+ proxy_url = "http://127.0.0.1:%d" % self.server.port
+ handler = urllib2.ProxyHandler({"http" : proxy_url})
self._digest_auth_handler = urllib2.ProxyDigestAuthHandler()
self.opener = urllib2.build_opener(handler, self._digest_auth_handler)
Modified: python/branches/py3k-struni/Lib/threading.py
==============================================================================
--- python/branches/py3k-struni/Lib/threading.py (original)
+++ python/branches/py3k-struni/Lib/threading.py Tue Aug 7 01:33:07 2007
@@ -85,9 +85,10 @@
self.__count = 0
def __repr__(self):
+ owner = self.__owner
return "<%s(%s, %d)>" % (
self.__class__.__name__,
- self.__owner and self.__owner.getName(),
+ owner and owner.getName(),
self.__count)
def acquire(self, blocking=1):
Modified: python/branches/py3k-struni/Modules/cjkcodecs/_codecs_cn.c
==============================================================================
--- python/branches/py3k-struni/Modules/cjkcodecs/_codecs_cn.c (original)
+++ python/branches/py3k-struni/Modules/cjkcodecs/_codecs_cn.c Tue Aug 7 01:33:07 2007
@@ -197,6 +197,7 @@
REQUIRE_OUTBUF(2)
GBK_ENCODE(c, code)
+ else TRYMAP_ENC(gb18030ext, code, c);
else {
const struct _gb18030_to_unibmp_ranges *utrrange;
Modified: python/branches/py3k-struni/Modules/unicodedata.c
==============================================================================
--- python/branches/py3k-struni/Modules/unicodedata.c (original)
+++ python/branches/py3k-struni/Modules/unicodedata.c Tue Aug 7 01:33:07 2007
@@ -1077,8 +1077,7 @@
unicodedata_lookup(PyObject* self, PyObject* args)
{
Py_UCS4 code;
- Py_UNICODE str[1];
- char errbuf[256];
+ Py_UNICODE str[2];
char* name;
int namelen;
@@ -1086,24 +1085,20 @@
return NULL;
if (!_getcode(self, name, namelen, &code)) {
- /* XXX(nnorwitz): why are we allocating for the error msg?
- Why not always use snprintf? */
- char fmt[] = "undefined character name '%s'";
- char *buf = PyMem_MALLOC(sizeof(fmt) + namelen);
- if (buf)
- sprintf(buf, fmt, name);
- else {
- buf = errbuf;
- PyOS_snprintf(buf, sizeof(errbuf), fmt, name);
- }
- PyErr_SetString(PyExc_KeyError, buf);
- if (buf != errbuf)
- PyMem_FREE(buf);
+ PyErr_Format(PyExc_KeyError, "undefined character name '%s'",
+ name);
return NULL;
}
+#ifndef Py_UNICODE_WIDE
+ if (code >= 0x10000) {
+ str[0] = 0xd800 + ((code - 0x10000) >> 10);
+ str[1] = 0xdc00 + ((code - 0x10000) & 0x3ff);
+ return PyUnicode_FromUnicode(str, 2);
+ }
+#endif
str[0] = (Py_UNICODE) code;
- return PyUnicode_FromUnicode(str, 1);
+ return PyUnicode_FromUnicode(str, 1);
}
/* XXX Add doc strings. */
Modified: python/branches/py3k-struni/Objects/stringobject.c
==============================================================================
--- python/branches/py3k-struni/Objects/stringobject.c (original)
+++ python/branches/py3k-struni/Objects/stringobject.c Tue Aug 7 01:33:07 2007
@@ -1868,7 +1868,7 @@
"S.find(sub [,start [,end]]) -> int\n\
\n\
Return the lowest index in S where substring sub is found,\n\
-such that sub is contained within s[start,end]. Optional\n\
+such that sub is contained within s[start:end]. Optional\n\
arguments start and end are interpreted as in slice notation.\n\
\n\
Return -1 on failure.");
@@ -1907,7 +1907,7 @@
"S.rfind(sub [,start [,end]]) -> int\n\
\n\
Return the highest index in S where substring sub is found,\n\
-such that sub is contained within s[start,end]. Optional\n\
+such that sub is contained within s[start:end]. Optional\n\
arguments start and end are interpreted as in slice notation.\n\
\n\
Return -1 on failure.");
Modified: python/branches/py3k-struni/Objects/unicodeobject.c
==============================================================================
--- python/branches/py3k-struni/Objects/unicodeobject.c (original)
+++ python/branches/py3k-struni/Objects/unicodeobject.c Tue Aug 7 01:33:07 2007
@@ -6295,7 +6295,7 @@
"S.find(sub [,start [,end]]) -> int\n\
\n\
Return the lowest index in S where substring sub is found,\n\
-such that sub is contained within s[start,end]. Optional\n\
+such that sub is contained within s[start:end]. Optional\n\
arguments start and end are interpreted as in slice notation.\n\
\n\
Return -1 on failure.");
@@ -7149,7 +7149,7 @@
"S.rfind(sub [,start [,end]]) -> int\n\
\n\
Return the highest index in S where substring sub is found,\n\
-such that sub is contained within s[start,end]. Optional\n\
+such that sub is contained within s[start:end]. Optional\n\
arguments start and end are interpreted as in slice notation.\n\
\n\
Return -1 on failure.");
Modified: python/branches/py3k-struni/PC/pyconfig.h
==============================================================================
--- python/branches/py3k-struni/PC/pyconfig.h (original)
+++ python/branches/py3k-struni/PC/pyconfig.h Tue Aug 7 01:33:07 2007
@@ -32,6 +32,11 @@
#define MS_WINCE
#endif
+/* Deprecated USE_DL_EXPORT macro - please use Py_BUILD_CORE */
+#ifdef USE_DL_EXPORT
+# define Py_BUILD_CORE
+#endif /* USE_DL_EXPORT */
+
/* Visual Studio 2005 introduces deprecation warnings for
"insecure" and POSIX functions. The insecure functions should
be replaced by *_s versions (according to Microsoft); the
@@ -140,7 +145,7 @@
#if defined(_M_IA64)
#define COMPILER _Py_PASTE_VERSION("64 bit (Itanium)")
#define MS_WINI64
-#elif defined(_M_X64)
+#elif defined(_M_X64) || defined(_M_AMD64)
#define COMPILER _Py_PASTE_VERSION("64 bit (AMD64)")
#define MS_WINX64
#else
@@ -151,12 +156,26 @@
/* set the version macros for the windows headers */
#ifdef MS_WINX64
/* 64 bit only runs on XP or greater */
-#define _WIN32_WINNT 0x0501
-#define WINVER 0x0501
+#define Py_WINVER 0x0501
#else
/* NT 4.0 or greater required otherwise */
-#define _WIN32_WINNT 0x0400
-#define WINVER 0x0400
+#define Py_WINVER 0x0400
+#endif
+
+/* We only set these values when building Python - we don't want to force
+ these values on extensions, as that will affect the prototypes and
+ structures exposed in the Windows headers. Even when building Python, we
+ allow a single source file to override this - they may need access to
+ structures etc so it can optionally use new Windows features if it
+ determines at runtime they are available.
+*/
+#ifdef Py_BUILD_CORE
+#ifndef WINVER
+#define WINVER Py_WINVER
+#endif
+#ifndef _WIN32_WINNT
+#define _WIN32_WINNT Py_WINVER
+#endif
#endif
/* _W64 is not defined for VC6 or eVC4 */
@@ -287,11 +306,6 @@
# define MS_COREDLL /* deprecated old symbol */
#endif /* !MS_NO_COREDLL && ... */
-/* Deprecated USE_DL_EXPORT macro - please use Py_BUILD_CORE */
-#ifdef USE_DL_EXPORT
-# define Py_BUILD_CORE
-#endif /* USE_DL_EXPORT */
-
/* All windows compilers that use this header support __declspec */
#define HAVE_DECLSPEC_DLL
Modified: python/branches/py3k-struni/Python/structmember.c
==============================================================================
--- python/branches/py3k-struni/Python/structmember.c (original)
+++ python/branches/py3k-struni/Python/structmember.c Tue Aug 7 01:33:07 2007
@@ -156,6 +156,12 @@
return -1;
}
+#define WARN(msg) \
+ do { \
+ if (PyErr_Warn(PyExc_RuntimeWarning, msg) < 0) \
+ return -1; \
+ } while (0)
+
int
PyMember_SetOne(char *addr, PyMemberDef *l, PyObject *v)
{
@@ -174,60 +180,54 @@
addr += l->offset;
switch (l->type) {
case T_BYTE:{
- long long_val;
- long_val = PyInt_AsLong(v);
+ long long_val = PyInt_AsLong(v);
if ((long_val == -1) && PyErr_Occurred())
return -1;
+ *(char*)addr = (char)long_val;
/* XXX: For compatibility, only warn about truncations
for now. */
if ((long_val > CHAR_MAX) || (long_val < CHAR_MIN))
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to char");
- *(char*)addr = (char)long_val;
+ WARN("Truncation of value to char");
break;
}
case T_UBYTE:{
- long long_val;
- long_val = PyInt_AsLong(v);
+ long long_val = PyInt_AsLong(v);
if ((long_val == -1) && PyErr_Occurred())
return -1;
- if ((long_val > UCHAR_MAX) || (long_val < 0))
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to unsigned char");
*(unsigned char*)addr = (unsigned char)long_val;
+ if ((long_val > UCHAR_MAX) || (long_val < 0))
+ WARN("Truncation of value to unsigned char");
break;
}
case T_SHORT:{
- long long_val;
- long_val = PyInt_AsLong(v);
+ long long_val = PyInt_AsLong(v);
if ((long_val == -1) && PyErr_Occurred())
return -1;
- if ((long_val > SHRT_MAX) || (long_val < SHRT_MIN))
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to short");
*(short*)addr = (short)long_val;
+ if ((long_val > SHRT_MAX) || (long_val < SHRT_MIN))
+ WARN("Truncation of value to short");
break;
}
case T_USHORT:{
- long long_val;
- long_val = PyInt_AsLong(v);
+ long long_val = PyInt_AsLong(v);
if ((long_val == -1) && PyErr_Occurred())
return -1;
- if ((long_val > USHRT_MAX) || (long_val < 0))
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to unsigned short");
*(unsigned short*)addr = (unsigned short)long_val;
+ if ((long_val > USHRT_MAX) || (long_val < 0))
+ WARN("Truncation of value to unsigned short");
break;
}
case T_INT:{
- long long_val;
- long_val = PyInt_AsLong(v);
+ long long_val = PyInt_AsLong(v);
if ((long_val == -1) && PyErr_Occurred())
return -1;
- if ((long_val > INT_MAX) || (long_val < INT_MIN))
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to int");
*(int *)addr = (int)long_val;
+ if ((long_val > INT_MAX) || (long_val < INT_MIN))
+ WARN("Truncation of value to int");
break;
}
case T_UINT:{
- unsigned long ulong_val;
- ulong_val = PyLong_AsUnsignedLong(v);
+ unsigned long ulong_val = PyLong_AsUnsignedLong(v);
if ((ulong_val == (unsigned int)-1) && PyErr_Occurred()) {
/* XXX: For compatibility, accept negative int values
as well. */
@@ -235,11 +235,12 @@
ulong_val = PyLong_AsLong(v);
if ((ulong_val == (unsigned int)-1) && PyErr_Occurred())
return -1;
- PyErr_Warn(PyExc_RuntimeWarning, "Writing negative value into unsigned field");
- }
+ *(unsigned int *)addr = (unsigned int)ulong_val;
+ WARN("Writing negative value into unsigned field");
+ } else
+ *(unsigned int *)addr = (unsigned int)ulong_val;
if (ulong_val > UINT_MAX)
- PyErr_Warn(PyExc_RuntimeWarning, "Truncation of value to unsigned int");
- *(unsigned int *)addr = (unsigned int)ulong_val;
+ WARN("Truncation of value to unsigned int");
break;
}
case T_LONG:{
@@ -256,9 +257,10 @@
as well. */
PyErr_Clear();
*(unsigned long*)addr = PyLong_AsLong(v);
- if ((*(unsigned long*)addr == (unsigned int)-1) && PyErr_Occurred())
+ if ((*(unsigned long*)addr == (unsigned int)-1)
+ && PyErr_Occurred())
return -1;
- PyErr_Warn(PyExc_RuntimeWarning, "Writing negative value into unsigned field");
+ WARN("Writing negative value into unsigned field");
}
break;
}
@@ -270,8 +272,7 @@
break;
}
case T_FLOAT:{
- double double_val;
- double_val = PyFloat_AsDouble(v);
+ double double_val = PyFloat_AsDouble(v);
if ((double_val == -1) && PyErr_Occurred())
return -1;
*(float*)addr = (float)double_val;
Modified: python/branches/py3k-struni/configure
==============================================================================
--- python/branches/py3k-struni/configure (original)
+++ python/branches/py3k-struni/configure Tue Aug 7 01:33:07 2007
@@ -1,5 +1,5 @@
#! /bin/sh
-# From configure.in Revision: 54283 .
+# From configure.in Revision: 55739 .
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61 for python 3.0.
#
@@ -1838,6 +1838,14 @@
_ACEOF
+# OpenBSD undoes our definition of __BSD_VISIBLE if _XOPEN_SOURCE is
+# also defined. This can be overridden by defining _BSD_SOURCE
+
+cat >>confdefs.h <<\_ACEOF
+#define _BSD_SOURCE 1
+_ACEOF
+
+
# The later defininition of _XOPEN_SOURCE and _POSIX_C_SOURCE disables
# u_int on Irix 5.3. Defining _BSD_TYPES brings it back.
Modified: python/branches/py3k-struni/configure.in
==============================================================================
--- python/branches/py3k-struni/configure.in (original)
+++ python/branches/py3k-struni/configure.in Tue Aug 7 01:33:07 2007
@@ -50,6 +50,10 @@
# them.
AC_DEFINE(__BSD_VISIBLE, 1, [Define on FreeBSD to activate all library features])
+# OpenBSD undoes our definition of __BSD_VISIBLE if _XOPEN_SOURCE is
+# also defined. This can be overridden by defining _BSD_SOURCE
+AC_DEFINE(_BSD_SOURCE, 1, [Define on OpenBSD to activate all library features])
+
# The later defininition of _XOPEN_SOURCE and _POSIX_C_SOURCE disables
# u_int on Irix 5.3. Defining _BSD_TYPES brings it back.
AC_DEFINE(_BSD_TYPES, 1, [Define on Irix to enable u_int])
Modified: python/branches/py3k-struni/pyconfig.h.in
==============================================================================
--- python/branches/py3k-struni/pyconfig.h.in (original)
+++ python/branches/py3k-struni/pyconfig.h.in Tue Aug 7 01:33:07 2007
@@ -103,6 +103,10 @@
/* Define if you have the 'resize_term' function. */
#undef HAVE_CURSES_RESIZE_TERM
+/* Define to 1 if you have the declaration of `tzname', and to 0 if you don't.
+ */
+#undef HAVE_DECL_TZNAME
+
/* Define to 1 if you have the device macros. */
#undef HAVE_DEVICE_MACROS
@@ -802,22 +806,22 @@
/* Define if i>>j for signed int i does not extend the sign bit when i < 0 */
#undef SIGNED_RIGHT_SHIFT_ZERO_FILLS
-/* The size of a `double', as computed by sizeof. */
+/* The size of `double', as computed by sizeof. */
#undef SIZEOF_DOUBLE
-/* The size of a `float', as computed by sizeof. */
+/* The size of `float', as computed by sizeof. */
#undef SIZEOF_FLOAT
-/* The size of a `fpos_t', as computed by sizeof. */
+/* The size of `fpos_t', as computed by sizeof. */
#undef SIZEOF_FPOS_T
-/* The size of a `int', as computed by sizeof. */
+/* The size of `int', as computed by sizeof. */
#undef SIZEOF_INT
-/* The size of a `long', as computed by sizeof. */
+/* The size of `long', as computed by sizeof. */
#undef SIZEOF_LONG
-/* The size of a `long long', as computed by sizeof. */
+/* The size of `long long', as computed by sizeof. */
#undef SIZEOF_LONG_LONG
/* The number of bytes in an off_t. */
@@ -826,25 +830,25 @@
/* The number of bytes in a pthread_t. */
#undef SIZEOF_PTHREAD_T
-/* The size of a `short', as computed by sizeof. */
+/* The size of `short', as computed by sizeof. */
#undef SIZEOF_SHORT
-/* The size of a `size_t', as computed by sizeof. */
+/* The size of `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The number of bytes in a time_t. */
#undef SIZEOF_TIME_T
-/* The size of a `uintptr_t', as computed by sizeof. */
+/* The size of `uintptr_t', as computed by sizeof. */
#undef SIZEOF_UINTPTR_T
-/* The size of a `void *', as computed by sizeof. */
+/* The size of `void *', as computed by sizeof. */
#undef SIZEOF_VOID_P
-/* The size of a `wchar_t', as computed by sizeof. */
+/* The size of `wchar_t', as computed by sizeof. */
#undef SIZEOF_WCHAR_T
-/* The size of a `_Bool', as computed by sizeof. */
+/* The size of `_Bool', as computed by sizeof. */
#undef SIZEOF__BOOL
/* Define to 1 if you have the ANSI C header files. */
@@ -924,6 +928,9 @@
# undef _ALL_SOURCE
#endif
+/* Define on OpenBSD to activate all library features */
+#undef _BSD_SOURCE
+
/* Define on Irix to enable u_int */
#undef _BSD_TYPES
@@ -980,7 +987,7 @@
/* Define to `int' if <sys/types.h> does not define. */
#undef mode_t
-/* Define to `long' if <sys/types.h> does not define. */
+/* Define to `long int' if <sys/types.h> does not define. */
#undef off_t
/* Define to `int' if <sys/types.h> does not define. */
@@ -989,7 +996,7 @@
/* Define to empty if the keyword does not work. */
#undef signed
-/* Define to `unsigned' if <sys/types.h> does not define. */
+/* Define to `unsigned int' if <sys/types.h> does not define. */
#undef size_t
/* Define to `int' if <sys/socket.h> does not define. */
More information about the Python-3000-checkins
mailing list