From thomas.f.hahn2 at gmail.com Sun Jan 4 04:22:18 2015 From: thomas.f.hahn2 at gmail.com (thomas hahn) Date: Sat, 3 Jan 2015 21:22:18 -0600 Subject: [omaha] Help with finding tutors for Python, Linux, R, Perl, Octave, MATLAB and/or Cytoscape for yeast microarray analysis, next generation sequencing and constructing gene interaction networks Message-ID: *Help with finding tutors for Python, Linux, R, Perl, Octave, MATLAB and/or Cytoscape for yeast microarray analysis, next generation sequencing and constructing gene interaction networks* Hi I am a visually impaired bioinformatics graduate student using microarray data for my master?s thesis aimed at deciphering the mechanism by which the yeast wild type can suppress the rise of free reactive oxygen species (ROS) induced by caloric restriction (CR) but the Atg15 and Erg6 knockout mutant cannot. Since my remaining vision is very limited I need very high magnification. But that makes my visual field very small. Therefore I need somebody to teach me how to use these programming environments, especially for microarray analysis, next generation sequencing and constructing gene and pathway interaction networks. This is very difficult for me to figure out without assistance because Zoomtext, my magnification and text to speech software, on which I am depending because I am almost blind, has problems reading out aloud many programming related websites to me. And even those websites it can read, it can only read sequentially from left to right and then from top to bottom. Unfortunately, this way of acquiring, finding, selecting and processing new information and answering questions is too tiresome, exhausting, ineffective and especially way too time consuming for graduating with a PhD in bioinformatics before my funding runs out despite being severely limited by my visual disability. I would also need help with writing a good literature review and applying the described techniques to my own yeast Affimetrix microarray dataset because I cannot see well enough to find all relevant publications on my own. Some examples for specific tasks I urgently need help with are: 1. Analyzing and comparing the three publically available microarray datasets that can be accessed at: A. http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE41860 B. http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE38635 C. http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE9217 2. Learning how to use the Affymetrics microarray analysis software for the Yeast 2 chip, which can be found at http://www.affymetrix.com/support/technical/libraryfilesmain.affx 3. For Cytoscape I need somebody, who can teach me how to execute the tutorials at the following links because due to my very limited vision field I cannot see tutorial and program interface simultaneously. A. http://opentutorials.cgl.ucsf.edu/index.php/Tutorial:Introduction_to_Cytoscape_3.1-part2#Importing_and_Exploring_Your_Data B. http://opentutorials.cgl.ucsf.edu/index.php/Tutorial:Filtering_and_Editing_in_Cytoscape_3 C. http://cytoscape.org/manual/Cytoscape2_8Manual.html#Import%20Fixed-Format%20Network%20Files D. http://wiki.cytoscape.org/Cytoscape_User_Manual/Network_Formats 4. Learning how to use the TopGo R package to perform statistical analysis on GO enrichments. Since I am legally blind the rehab agency is giving me money to pay tutors for this purpose. Could you please help me getting in touch regarding this with anybody, who could potentially be interested in teaching me one on one thus saving me time for acquiring new information and skills, which I need to finish my thesis on time, so that I can remain eligible for funding to continue in my bioinformatics PhD program despite being almost blind? The tutoring can be done remotely via TeamViewer 5 and Skype. Hence, it does not matter where my tutors are physically located. Currently I have tutors in Croatia and UK. But since they both work full time jobs while working on their PhD dissertation they only have very limited time to teach me online. Could you therefore please forward this request for help to anybody, who could potentially be interested or, who could connect me to somebody, who might be, because my graduation and career depend on it? Who else would you recommend me to contact regarding this? Where else could I post this because I am in urgent need for help? Could you please contact me directly via email at Thomas.F.Hahn2 at gmail.com and/or Skype at tfh002 because my text to speech software has problems to read out this website aloud to me? I thank you very much in advance for your thoughts, ideas, suggestions, recommendations, time, help, efforts and support. With very warm regards, *Thomas Hahn* 1) *Graduate student in the Joint Bioinformatics Program at the University of Arkansas at Little Rock (UALR) and the University of Arkansas Medical Sciences (UAMS) &* 2) *Research & Industry Advocate, Founder and Board Member of RADISH MEDICAL SOLUTIONS, INC. (**http://www.radishmedical.com/thomas-hahn/* *) * *Primary email: **Thomas.F.Hahn2 at gmail.com* *Cell phone: 318 243 3940* *Office phone: 501 682 1440* *Office location: EIT 535* *Skype ID: tfh002* *Virtual Google Voice phone to reach me while logged into my email (i.e. * *Thomas.F.Hahn2 at gmail.com* *), even when having no cell phone reception, e.g. in big massive buildings: *(501) 301-4890 <%28501%29%20301-4890> *Web links: * 1) https://ualr.academia.edu/ThomasHahn 2) https://www.linkedin.com/pub/thomas-hahn/42/b29/42 3) http://facebook.com/Thomas.F.Hahn 4) https://twitter.com/Thomas_F_Hahn From varun.sagi20 at gmail.com Tue Jan 13 06:20:09 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Mon, 12 Jan 2015 23:20:09 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! Message-ID: I am looking for alternatives to load and static template tags of django in Jinja2. Please help. -Varun From wes.turner at gmail.com Tue Jan 13 07:07:42 2015 From: wes.turner at gmail.com (Wes Turner) Date: Tue, 13 Jan 2015 00:07:42 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: References: Message-ID: https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static http://jinja.pocoo.org/docs/dev/switching/#django http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals http://niwibe.github.io/django-jinja/#_django_pipeline ... https://www.indiegogo.com/projects/multiple-template-engines-for-django On Jan 12, 2015 11:20 PM, "Varun Mehta" wrote: > I am looking for alternatives to load and static template tags of django > in Jinja2. > Please help. > > -Varun > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From varun.sagi20 at gmail.com Tue Jan 13 07:35:23 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 13 Jan 2015 00:35:23 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: References: Message-ID: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> None of the link answers my questions. I do know how to load jinja2 in django. The problem revolves around load and static tag. In flask, they have alternative of url_for(). Looking for a solution in django. -Varun On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: > https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ > > https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static > > http://jinja.pocoo.org/docs/dev/switching/#django > > http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals > > http://niwibe.github.io/django-jinja/#_django_pipeline > > ... https://www.indiegogo.com/projects/multiple-template-engines-for-django > On Jan 12, 2015 11:20 PM, "Varun Mehta" wrote: > >> I am looking for alternatives to load and static template tags of django >> in Jinja2. >> Please help. >> >> -Varun >> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >> > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From wes.turner at gmail.com Tue Jan 13 07:45:00 2015 From: wes.turner at gmail.com (Wes Turner) Date: Tue, 13 Jan 2015 00:45:00 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> References: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> Message-ID: Do you have a few links to the documentation for the features you are referring to? On Jan 13, 2015 12:35 AM, "Varun Mehta" wrote: > None of the link answers my questions. > I do know how to load jinja2 in django. > The problem revolves around load and static tag. > > In flask, they have alternative of url_for(). > Looking for a solution in django. > > -Varun > > On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: > > > https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ > > > > > https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static > > > > http://jinja.pocoo.org/docs/dev/switching/#django > > > > http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals > > > > http://niwibe.github.io/django-jinja/#_django_pipeline > > > > ... > https://www.indiegogo.com/projects/multiple-template-engines-for-django > > On Jan 12, 2015 11:20 PM, "Varun Mehta" wrote: > > > >> I am looking for alternatives to load and static template tags of django > >> in Jinja2. > >> Please help. > >> > >> -Varun > >> > >> _______________________________________________ > >> Omaha Python Users Group mailing list > >> Omaha at python.org > >> https://mail.python.org/mailman/listinfo/omaha > >> http://www.OmahaPython.org > >> > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From varun.sagi20 at gmail.com Tue Jan 13 07:50:12 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 13 Jan 2015 00:50:12 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: References: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> Message-ID: <21501EA8-3B73-45BF-9BAB-7A0052701048@gmail.com> https://docs.djangoproject.com/en/1.7/howto/static-files/ This explains static file (css, images etc) management in django templates using load & static tags. I am using jinja2. Could not find similar solution? Varun On Jan 13, 2015, at 12:45 AM, Wes Turner wrote: > Do you have a few links to the documentation for the features you are > referring to? > On Jan 13, 2015 12:35 AM, "Varun Mehta" wrote: > >> None of the link answers my questions. >> I do know how to load jinja2 in django. >> The problem revolves around load and static tag. >> >> In flask, they have alternative of url_for(). >> Looking for a solution in django. >> >> -Varun >> >> On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: >> >>> https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ >>> >>> >> https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static >>> >>> http://jinja.pocoo.org/docs/dev/switching/#django >>> >>> http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals >>> >>> http://niwibe.github.io/django-jinja/#_django_pipeline >>> >>> ... >> https://www.indiegogo.com/projects/multiple-template-engines-for-django >>> On Jan 12, 2015 11:20 PM, "Varun Mehta" wrote: >>> >>>> I am looking for alternatives to load and static template tags of django >>>> in Jinja2. >>>> Please help. >>>> >>>> -Varun >>>> >>>> _______________________________________________ >>>> Omaha Python Users Group mailing list >>>> Omaha at python.org >>>> https://mail.python.org/mailman/listinfo/omaha >>>> http://www.OmahaPython.org >>>> >>> _______________________________________________ >>> Omaha Python Users Group mailing list >>> Omaha at python.org >>> https://mail.python.org/mailman/listinfo/omaha >>> http://www.OmahaPython.org >> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >> > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From wes.turner at gmail.com Tue Jan 13 08:16:21 2015 From: wes.turner at gmail.com (Wes Turner) Date: Tue, 13 Jan 2015 01:16:21 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: <21501EA8-3B73-45BF-9BAB-7A0052701048@gmail.com> References: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> <21501EA8-3B73-45BF-9BAB-7A0052701048@gmail.com> Message-ID: I believe webassets and fanstatic have some form of template support? http://www.reddit.com/r/Python/comments/1quqy7/my_favorite_database_is_the_network/cdh6nix On Jan 13, 2015 12:50 AM, "Varun Mehta" wrote: > https://docs.djangoproject.com/en/1.7/howto/static-files/ > This explains static file (css, images etc) management in django templates > using load & static tags. > > I am using jinja2. Could not find similar solution? > > Varun > > On Jan 13, 2015, at 12:45 AM, Wes Turner wrote: > > > Do you have a few links to the documentation for the features you are > > referring to? > > On Jan 13, 2015 12:35 AM, "Varun Mehta" wrote: > > > >> None of the link answers my questions. > >> I do know how to load jinja2 in django. > >> The problem revolves around load and static tag. > >> > >> In flask, they have alternative of url_for(). > >> Looking for a solution in django. > >> > >> -Varun > >> > >> On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: > >> > >>> https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ > >>> > >>> > >> > https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static > >>> > >>> http://jinja.pocoo.org/docs/dev/switching/#django > >>> > >>> http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals > >>> > >>> http://niwibe.github.io/django-jinja/#_django_pipeline > >>> > >>> ... > >> https://www.indiegogo.com/projects/multiple-template-engines-for-django > >>> On Jan 12, 2015 11:20 PM, "Varun Mehta" > wrote: > >>> > >>>> I am looking for alternatives to load and static template tags of > django > >>>> in Jinja2. > >>>> Please help. > >>>> > >>>> -Varun > >>>> > >>>> _______________________________________________ > >>>> Omaha Python Users Group mailing list > >>>> Omaha at python.org > >>>> https://mail.python.org/mailman/listinfo/omaha > >>>> http://www.OmahaPython.org > >>>> > >>> _______________________________________________ > >>> Omaha Python Users Group mailing list > >>> Omaha at python.org > >>> https://mail.python.org/mailman/listinfo/omaha > >>> http://www.OmahaPython.org > >> > >> _______________________________________________ > >> Omaha Python Users Group mailing list > >> Omaha at python.org > >> https://mail.python.org/mailman/listinfo/omaha > >> http://www.OmahaPython.org > >> > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From wes.turner at gmail.com Tue Jan 13 08:22:40 2015 From: wes.turner at gmail.com (Wes Turner) Date: Tue, 13 Jan 2015 01:22:40 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: References: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> <21501EA8-3B73-45BF-9BAB-7A0052701048@gmail.com> Message-ID: https://webassets.readthedocs.org/en/latest/ http://www.fanstatic.org/en/latest/ http://fileconveyor.org (arguably, for production, there should be no need to do asset compression or CDN hosting in a template, for every request) On Jan 13, 2015 1:16 AM, "Wes Turner" wrote: > I believe webassets and fanstatic have some form of template support? > > > http://www.reddit.com/r/Python/comments/1quqy7/my_favorite_database_is_the_network/cdh6nix > On Jan 13, 2015 12:50 AM, "Varun Mehta" wrote: > >> https://docs.djangoproject.com/en/1.7/howto/static-files/ >> This explains static file (css, images etc) management in django >> templates using load & static tags. >> >> I am using jinja2. Could not find similar solution? >> >> Varun >> >> On Jan 13, 2015, at 12:45 AM, Wes Turner wrote: >> >> > Do you have a few links to the documentation for the features you are >> > referring to? >> > On Jan 13, 2015 12:35 AM, "Varun Mehta" wrote: >> > >> >> None of the link answers my questions. >> >> I do know how to load jinja2 in django. >> >> The problem revolves around load and static tag. >> >> >> >> In flask, they have alternative of url_for(). >> >> Looking for a solution in django. >> >> >> >> -Varun >> >> >> >> On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: >> >> >> >>> https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ >> >>> >> >>> >> >> >> https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static >> >>> >> >>> http://jinja.pocoo.org/docs/dev/switching/#django >> >>> >> >>> http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals >> >>> >> >>> http://niwibe.github.io/django-jinja/#_django_pipeline >> >>> >> >>> ... >> >> >> https://www.indiegogo.com/projects/multiple-template-engines-for-django >> >>> On Jan 12, 2015 11:20 PM, "Varun Mehta" >> wrote: >> >>> >> >>>> I am looking for alternatives to load and static template tags of >> django >> >>>> in Jinja2. >> >>>> Please help. >> >>>> >> >>>> -Varun >> >>>> >> >>>> _______________________________________________ >> >>>> Omaha Python Users Group mailing list >> >>>> Omaha at python.org >> >>>> https://mail.python.org/mailman/listinfo/omaha >> >>>> http://www.OmahaPython.org >> >>>> >> >>> _______________________________________________ >> >>> Omaha Python Users Group mailing list >> >>> Omaha at python.org >> >>> https://mail.python.org/mailman/listinfo/omaha >> >>> http://www.OmahaPython.org >> >> >> >> _______________________________________________ >> >> Omaha Python Users Group mailing list >> >> Omaha at python.org >> >> https://mail.python.org/mailman/listinfo/omaha >> >> http://www.OmahaPython.org >> >> >> > _______________________________________________ >> > Omaha Python Users Group mailing list >> > Omaha at python.org >> > https://mail.python.org/mailman/listinfo/omaha >> > http://www.OmahaPython.org >> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >> > From varun.sagi20 at gmail.com Wed Jan 14 02:24:36 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 13 Jan 2015 19:24:36 -0600 Subject: [omaha] Load and static tag alternates for Jinja2! In-Reply-To: References: <01E4601A-0932-4B13-A70E-BA6282AEA9C3@gmail.com> <21501EA8-3B73-45BF-9BAB-7A0052701048@gmail.com> Message-ID: <4B80D432-3F9C-4A36-A0F4-8D1A51D8C1A6@gmail.com> Thanks for all the inputs WES. Problem resolved. I am django-jinja as connector and it provides an in-built support for static file loading with static(). I missed it yesterday. Varun On Jan 13, 2015, at 1:22 AM, Wes Turner wrote: > https://webassets.readthedocs.org/en/latest/ > > http://www.fanstatic.org/en/latest/ > > http://fileconveyor.org (arguably, for production, there should be no need > to do asset compression or CDN hosting in a template, for every request) > On Jan 13, 2015 1:16 AM, "Wes Turner" wrote: > >> I believe webassets and fanstatic have some form of template support? >> >> >> http://www.reddit.com/r/Python/comments/1quqy7/my_favorite_database_is_the_network/cdh6nix >> On Jan 13, 2015 12:50 AM, "Varun Mehta" wrote: >> >>> https://docs.djangoproject.com/en/1.7/howto/static-files/ >>> This explains static file (css, images etc) management in django >>> templates using load & static tags. >>> >>> I am using jinja2. Could not find similar solution? >>> >>> Varun >>> >>> On Jan 13, 2015, at 12:45 AM, Wes Turner wrote: >>> >>>> Do you have a few links to the documentation for the features you are >>>> referring to? >>>> On Jan 13, 2015 12:35 AM, "Varun Mehta" wrote: >>>> >>>>> None of the link answers my questions. >>>>> I do know how to load jinja2 in django. >>>>> The problem revolves around load and static tag. >>>>> >>>>> In flask, they have alternative of url_for(). >>>>> Looking for a solution in django. >>>>> >>>>> -Varun >>>>> >>>>> On Jan 13, 2015, at 12:07 AM, Wes Turner wrote: >>>>> >>>>>> https://docs.djangoproject.com/en/1.7/howto/custom-template-tags/ >>>>>> >>>>>> >>>>> >>> https://docs.djangoproject.com/en/1.7/ref/contrib/staticfiles/#std:templatetag-staticfiles-static >>>>>> >>>>>> http://jinja.pocoo.org/docs/dev/switching/#django >>>>>> >>>>>> http://jinja.pocoo.org/docs/dev/api/#jinja2.Environment.globals >>>>>> >>>>>> http://niwibe.github.io/django-jinja/#_django_pipeline >>>>>> >>>>>> ... >>>>> >>> https://www.indiegogo.com/projects/multiple-template-engines-for-django >>>>>> On Jan 12, 2015 11:20 PM, "Varun Mehta" >>> wrote: >>>>>> >>>>>>> I am looking for alternatives to load and static template tags of >>> django >>>>>>> in Jinja2. >>>>>>> Please help. >>>>>>> >>>>>>> -Varun >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Omaha Python Users Group mailing list >>>>>>> Omaha at python.org >>>>>>> https://mail.python.org/mailman/listinfo/omaha >>>>>>> http://www.OmahaPython.org >>>>>>> >>>>>> _______________________________________________ >>>>>> Omaha Python Users Group mailing list >>>>>> Omaha at python.org >>>>>> https://mail.python.org/mailman/listinfo/omaha >>>>>> http://www.OmahaPython.org >>>>> >>>>> _______________________________________________ >>>>> Omaha Python Users Group mailing list >>>>> Omaha at python.org >>>>> https://mail.python.org/mailman/listinfo/omaha >>>>> http://www.OmahaPython.org >>>>> >>>> _______________________________________________ >>>> Omaha Python Users Group mailing list >>>> Omaha at python.org >>>> https://mail.python.org/mailman/listinfo/omaha >>>> http://www.OmahaPython.org >>> >>> _______________________________________________ >>> Omaha Python Users Group mailing list >>> Omaha at python.org >>> https://mail.python.org/mailman/listinfo/omaha >>> http://www.OmahaPython.org >>> >> > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From varun.sagi20 at gmail.com Wed Jan 14 02:43:15 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 13 Jan 2015 19:43:15 -0600 Subject: [omaha] Optimize database queries! Message-ID: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> http://codepen.io/varunsagi20/pen/qERXry Above link shows footer my blog (in development). It holds lot of dynamic information (Statistics, Latest Blogs and Tags with number of article associated) I don?t want to query this information for every client request. So, what is the best way to achieve so? Logging Information in a file Caching the information Other alternative?? Thanks in advance! -Varun From mike at hostetlerhome.com Wed Jan 14 04:03:54 2015 From: mike at hostetlerhome.com (Mike Hostetler) Date: Tue, 13 Jan 2015 21:03:54 -0600 Subject: [omaha] Optimize database queries! In-Reply-To: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> Message-ID: <1421204634.626255.213615733.292F9856@webmail.messagingengine.com> I assume you have read this? https://docs.djangoproject.com/en/1.7/topics/cache/ Memcache is pretty dead-easy to setup -- some of that depends on how much memory your system has. I have also used the filesystem cache with create success. Anyway, look at this part of the page: https://docs.djangoproject.com/en/1.7/topics/cache/#template-fragment-caching That is probably what you are looking for. -- Mike Hostetler mike at hostetlerhome.com On Tue, Jan 13, 2015, at 07:43 PM, Varun Mehta wrote: > http://codepen.io/varunsagi20/pen/qERXry > Above link shows footer my blog (in development). > It holds lot of dynamic information (Statistics, Latest Blogs and Tags > with number of article associated) > > I don?t want to query this information for every client request. > So, what is the best way to achieve so? > Logging Information in a file > Caching the information > Other alternative?? > > Thanks in advance! > -Varun > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From wes.turner at gmail.com Wed Jan 14 08:25:22 2015 From: wes.turner at gmail.com (Wes Turner) Date: Wed, 14 Jan 2015 01:25:22 -0600 Subject: [omaha] Optimize database queries! In-Reply-To: <1421204634.626255.213615733.292F9856@webmail.messagingengine.com> References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> <1421204634.626255.213615733.292F9856@webmail.messagingengine.com> Message-ID: On Jan 13, 2015 9:04 PM, "Mike Hostetler" wrote: > > I assume you have read this? > https://docs.djangoproject.com/en/1.7/topics/cache/ > > Memcache is pretty dead-easy to setup -- some of that depends on how > much memory your system has. I have also used the filesystem cache with > create success. This is a bit of a double-edged sword. Memcached does not do any authentication by default. https://code.google.com/p/memcached/wiki/SASLAuthProtocol https://code.google.com/p/memcached/wiki/SASLHowto For eventual on-disk storage, redis is one option. > > Anyway, look at this part of the page: > https://docs.djangoproject.com/en/1.7/topics/cache/#template-fragment-caching > > That is probably what you are looking for. This is a different sort of cache (which does not cache database calls or rendered templates): http://jinja.pocoo.org/docs/dev/api/#bytecode-cache This may also be useful for long-running processes: http://pythonhosted.org/django-memoize/ ... https://en.wikipedia.org/wiki/Memoization > > -- > Mike Hostetler > mike at hostetlerhome.com > > On Tue, Jan 13, 2015, at 07:43 PM, Varun Mehta wrote: > > http://codepen.io/varunsagi20/pen/qERXry > > Above link shows footer my blog (in development). > > It holds lot of dynamic information (Statistics, Latest Blogs and Tags > > with number of article associated) > > > > I don?t want to query this information for every client request. > > So, what is the best way to achieve so? > > Logging Information in a file > > Caching the information > > Other alternative?? > > > > Thanks in advance! > > -Varun > > > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.orglso From wereapwhatwesow at gmail.com Tue Jan 20 16:37:12 2015 From: wereapwhatwesow at gmail.com (Steve Young) Date: Tue, 20 Jan 2015 09:37:12 -0600 Subject: [omaha] January Meeting Wed 1/21/15 Message-ID: It is time for the first meeting for 2015! Unfortunately I have a full day Wednesday and most likely will not be able to attend, and definitely will not be able to host. Reply if you can attend and include meeting place and topic suggestions. Steve From jrguliz at yahoo.com Tue Jan 20 17:05:21 2015 From: jrguliz at yahoo.com (Joe Gulizia) Date: Tue, 20 Jan 2015 08:05:21 -0800 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: Message-ID: <1421769921.43434.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> I was going to attempt attending again. Wish it started and ended earlier though...630-830 or 900 Joe Sent from Yahoo Mail on Android From eric.edens at gmail.com Tue Jan 20 20:33:12 2015 From: eric.edens at gmail.com (Eric Edens) Date: Tue, 20 Jan 2015 11:33:12 -0800 Subject: [omaha] Optimize database queries! In-Reply-To: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> Message-ID: Redis and memcached? How popular is your blog? :) Have you considered a static site generator? Any time you update your site -- write a new blog post, add a footer link, or whatever -- you re-render each page as an HTML file. After that, upload those static files to your web server. This is *extremely* fast, secure, and cheap. Your hosting will only serve static files, and you won't have to keep processes running for the Python interpreter, the database, or any other caching layers. I've used Jekyll [http://jekyllrb.com/] in the past, but there are definitely others. This one works with Django templates, it seems: https://github.com/koenbok/cactus. If you want fancy dynamic stuff, you can always make async JS calls after the page has loaded. -- Eric From bob.haffner at gmail.com Tue Jan 20 21:27:11 2015 From: bob.haffner at gmail.com (Bob Haffner) Date: Tue, 20 Jan 2015 14:27:11 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: Message-ID: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> I'm in. Gordmans would be fantastic is Aaron was willing. If not, Panera on 78th and Dodge or another centrally located place Not sure on topics. I'm open. Sent from my iPhone > On Jan 20, 2015, at 9:37 AM, Steve Young wrote: > > It is time for the first meeting for 2015! > > Unfortunately I have a full day Wednesday and most likely will not be able > to attend, and definitely will not be able to host. > > Reply if you can attend and include meeting place and topic suggestions. > > Steve > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From keckbug at gmail.com Tue Jan 20 21:38:43 2015 From: keckbug at gmail.com (Aaron Keck) Date: Tue, 20 Jan 2015 14:38:43 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: I think I'm available and Gordmans would be happy to host, but I'd be a proponent of shifting things a bit earlier to 6:30 or 6:00 even. Whichever works easiest for the group. On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner wrote: > I'm in. Gordmans would be fantastic is Aaron was willing. If not, > Panera on 78th and Dodge or another centrally located place > > Not sure on topics. I'm open. > > Sent from my iPhone > > > On Jan 20, 2015, at 9:37 AM, Steve Young > wrote: > > > > It is time for the first meeting for 2015! > > > > Unfortunately I have a full day Wednesday and most likely will not be > able > > to attend, and definitely will not be able to host. > > > > Reply if you can attend and include meeting place and topic suggestions. > > > > Steve > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From jeffh at dundeemt.com Tue Jan 20 21:44:51 2015 From: jeffh at dundeemt.com (Jeff Hinrichs - DM&T) Date: Tue, 20 Jan 2015 14:44:51 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: Earlier is fine, especially if requested by the person hosting or the group as a whole. Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, for those who plan on attending, would an earlier meeting time work better for you? Side note: If it would positively affect the number of people who attend, I am in favor of changing the meeting time in general. Best, Jeff On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck wrote: > I think I'm available and Gordmans would be happy to host, but I'd be a > proponent of shifting things a bit earlier to 6:30 or 6:00 even. Whichever > works easiest for the group. > > On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner > wrote: > > > I'm in. Gordmans would be fantastic is Aaron was willing. If not, > > Panera on 78th and Dodge or another centrally located place > > > > Not sure on topics. I'm open. > > > > Sent from my iPhone > > > > > On Jan 20, 2015, at 9:37 AM, Steve Young > > wrote: > > > > > > It is time for the first meeting for 2015! > > > > > > Unfortunately I have a full day Wednesday and most likely will not be > > able > > > to attend, and definitely will not be able to host. > > > > > > Reply if you can attend and include meeting place and topic > suggestions. > > > > > > Steve > > > _______________________________________________ > > > Omaha Python Users Group mailing list > > > Omaha at python.org > > > https://mail.python.org/mailman/listinfo/omaha > > > http://www.OmahaPython.org > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > -- Best, Jeff Hinrichs 402.218.1473 From keckbug at gmail.com Tue Jan 20 21:49:53 2015 From: keckbug at gmail.com (Aaron Keck) Date: Tue, 20 Jan 2015 14:49:53 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: If it were up to me, I'd vote 6pm, but I'm not too picky over half an hour. 7pm meetings tend to wrap up around 9pm, which makes my wife a bit cranky. On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T wrote: > Earlier is fine, especially if requested by the person hosting or the group > as a whole. > > Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, for > those who plan on attending, would an earlier meeting time work better for > you? > > > Side note: If it would positively affect the number of people who attend, I > am in favor of changing the meeting time in general. > > Best, > Jeff > > On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck wrote: > > > I think I'm available and Gordmans would be happy to host, but I'd be a > > proponent of shifting things a bit earlier to 6:30 or 6:00 even. > Whichever > > works easiest for the group. > > > > On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner > > wrote: > > > > > I'm in. Gordmans would be fantastic is Aaron was willing. If not, > > > Panera on 78th and Dodge or another centrally located place > > > > > > Not sure on topics. I'm open. > > > > > > Sent from my iPhone > > > > > > > On Jan 20, 2015, at 9:37 AM, Steve Young > > > wrote: > > > > > > > > It is time for the first meeting for 2015! > > > > > > > > Unfortunately I have a full day Wednesday and most likely will not be > > > able > > > > to attend, and definitely will not be able to host. > > > > > > > > Reply if you can attend and include meeting place and topic > > suggestions. > > > > > > > > Steve > > > > _______________________________________________ > > > > Omaha Python Users Group mailing list > > > > Omaha at python.org > > > > https://mail.python.org/mailman/listinfo/omaha > > > > http://www.OmahaPython.org > > > _______________________________________________ > > > Omaha Python Users Group mailing list > > > Omaha at python.org > > > https://mail.python.org/mailman/listinfo/omaha > > > http://www.OmahaPython.org > > > > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > > > > > -- > Best, > > Jeff Hinrichs > 402.218.1473 > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From wes.turner at gmail.com Tue Jan 20 21:53:45 2015 From: wes.turner at gmail.com (Wes Turner) Date: Tue, 20 Jan 2015 14:53:45 -0600 Subject: [omaha] Optimize database queries! In-Reply-To: References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> Message-ID: On Tue, Jan 20, 2015 at 1:33 PM, Eric Edens wrote: > Redis and memcached? How popular is your blog? :) > > Have you considered a static site generator? Any time you update your site > -- write a new blog post, add a footer link, or whatever -- you re-render > each page as an HTML file. After that, upload those static files to your > web server. > > This is *extremely* fast, secure, and cheap. Your hosting will only serve > static files, and you won't have to keep processes running for the Python > interpreter, the database, or any other caching layers. > > I've used Jekyll [http://jekyllrb.com/] in the past, but there are > definitely others. This one works with Django templates, it seems: > https://github.com/koenbok/cactus. > > If you want fancy dynamic stuff, you can always make async JS calls after > the page has loaded. > Good call. This [1] is generated with Tinkerer and hosted by GitHub Pages [2], which is backed by a CDN (Fastly); with HTTPS. > This blog is created from reStructuredText sources hosted by GitHub which are processed by Tinkerer (source ), which extends Sphinx (source , wikipedia ). ... Sphinx renders to HTML through Jinja2 templates. For JS, cdnjs [3] is backed by CloudFlare [4]. CloudFlare has a pretty cool CDN offering that adds an X-Forwarded-For header with the source IP. [1] https://westurner.github.io/2013/11/25/hello-world.html [2] https://pages.github.com/ [3] https://github.com/cdnjs/cdnjs [4] https://cdnjs.com/ [5] https://www.cloudflare.com/overview > > -- Eric > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From jeffh at dundeemt.com Tue Jan 20 22:08:58 2015 From: jeffh at dundeemt.com (Jeff Hinrichs - DM&T) Date: Tue, 20 Jan 2015 15:08:58 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: +1 Aaron's request for 6pm. If moving to 6pm creates a problem for anyone who would have otherwise attended, please speak up. On Tue, Jan 20, 2015 at 2:49 PM, Aaron Keck wrote: > If it were up to me, I'd vote 6pm, but I'm not too picky over half an hour. > 7pm meetings tend to wrap up around 9pm, which makes my wife a bit cranky. > > On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T > wrote: > > > Earlier is fine, especially if requested by the person hosting or the > group > > as a whole. > > > > Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, for > > those who plan on attending, would an earlier meeting time work better > for > > you? > > > > > > Side note: If it would positively affect the number of people who > attend, I > > am in favor of changing the meeting time in general. > > > > Best, > > Jeff > > > > On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck wrote: > > > > > I think I'm available and Gordmans would be happy to host, but I'd be a > > > proponent of shifting things a bit earlier to 6:30 or 6:00 even. > > Whichever > > > works easiest for the group. > > > > > > On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner > > > wrote: > > > > > > > I'm in. Gordmans would be fantastic is Aaron was willing. If not, > > > > Panera on 78th and Dodge or another centrally located place > > > > > > > > Not sure on topics. I'm open. > > > > > > > > Sent from my iPhone > > > > > > > > > On Jan 20, 2015, at 9:37 AM, Steve Young < > wereapwhatwesow at gmail.com> > > > > wrote: > > > > > > > > > > It is time for the first meeting for 2015! > > > > > > > > > > Unfortunately I have a full day Wednesday and most likely will not > be > > > > able > > > > > to attend, and definitely will not be able to host. > > > > > > > > > > Reply if you can attend and include meeting place and topic > > > suggestions. > > > > > > > > > > Steve > > > > > _______________________________________________ > > > > > Omaha Python Users Group mailing list > > > > > Omaha at python.org > > > > > https://mail.python.org/mailman/listinfo/omaha > > > > > http://www.OmahaPython.org > > > > _______________________________________________ > > > > Omaha Python Users Group mailing list > > > > Omaha at python.org > > > > https://mail.python.org/mailman/listinfo/omaha > > > > http://www.OmahaPython.org > > > > > > > _______________________________________________ > > > Omaha Python Users Group mailing list > > > Omaha at python.org > > > https://mail.python.org/mailman/listinfo/omaha > > > http://www.OmahaPython.org > > > > > > > > > > > -- > > Best, > > > > Jeff Hinrichs > > 402.218.1473 > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > -- Best, Jeff Hinrichs 402.218.1473 From varun.sagi20 at gmail.com Tue Jan 20 22:19:35 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 20 Jan 2015 15:19:35 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: upvote - 6pm. -Varun On Jan 20, 2015, at 3:08 PM, Jeff Hinrichs - DM&T wrote: > +1 Aaron's request for 6pm. > > If moving to 6pm creates a problem for anyone who would have otherwise > attended, please speak up. > > On Tue, Jan 20, 2015 at 2:49 PM, Aaron Keck wrote: > >> If it were up to me, I'd vote 6pm, but I'm not too picky over half an hour. >> 7pm meetings tend to wrap up around 9pm, which makes my wife a bit cranky. >> >> On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T >> wrote: >> >>> Earlier is fine, especially if requested by the person hosting or the >> group >>> as a whole. >>> >>> Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, for >>> those who plan on attending, would an earlier meeting time work better >> for >>> you? >>> >>> >>> Side note: If it would positively affect the number of people who >> attend, I >>> am in favor of changing the meeting time in general. >>> >>> Best, >>> Jeff >>> >>> On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck wrote: >>> >>>> I think I'm available and Gordmans would be happy to host, but I'd be a >>>> proponent of shifting things a bit earlier to 6:30 or 6:00 even. >>> Whichever >>>> works easiest for the group. >>>> >>>> On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner >>>> wrote: >>>> >>>>> I'm in. Gordmans would be fantastic is Aaron was willing. If not, >>>>> Panera on 78th and Dodge or another centrally located place >>>>> >>>>> Not sure on topics. I'm open. >>>>> >>>>> Sent from my iPhone >>>>> >>>>>> On Jan 20, 2015, at 9:37 AM, Steve Young < >> wereapwhatwesow at gmail.com> >>>>> wrote: >>>>>> >>>>>> It is time for the first meeting for 2015! >>>>>> >>>>>> Unfortunately I have a full day Wednesday and most likely will not >> be >>>>> able >>>>>> to attend, and definitely will not be able to host. >>>>>> >>>>>> Reply if you can attend and include meeting place and topic >>>> suggestions. >>>>>> >>>>>> Steve >>>>>> _______________________________________________ >>>>>> Omaha Python Users Group mailing list >>>>>> Omaha at python.org >>>>>> https://mail.python.org/mailman/listinfo/omaha >>>>>> http://www.OmahaPython.org >>>>> _______________________________________________ >>>>> Omaha Python Users Group mailing list >>>>> Omaha at python.org >>>>> https://mail.python.org/mailman/listinfo/omaha >>>>> http://www.OmahaPython.org >>>>> >>>> _______________________________________________ >>>> Omaha Python Users Group mailing list >>>> Omaha at python.org >>>> https://mail.python.org/mailman/listinfo/omaha >>>> http://www.OmahaPython.org >>>> >>> >>> >>> >>> -- >>> Best, >>> >>> Jeff Hinrichs >>> 402.218.1473 >>> _______________________________________________ >>> Omaha Python Users Group mailing list >>> Omaha at python.org >>> https://mail.python.org/mailman/listinfo/omaha >>> http://www.OmahaPython.org >>> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >> > > > > -- > Best, > > Jeff Hinrichs > 402.218.1473 > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From varun.sagi20 at gmail.com Tue Jan 20 22:21:45 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Tue, 20 Jan 2015 15:21:45 -0600 Subject: [omaha] Optimize database queries! In-Reply-To: References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> Message-ID: <91D5B691-A950-4DCD-ADAD-1A655AD190C8@gmail.com> I have not deployed my blog yet. :( But underlying idea is to learn all frequently used features for a django project. And cache is definitely one. Static pages definitely seems like a wonderful option. -Varun On Jan 20, 2015, at 2:53 PM, Wes Turner wrote: > On Tue, Jan 20, 2015 at 1:33 PM, Eric Edens wrote: > >> Redis and memcached? How popular is your blog? :) >> >> Have you considered a static site generator? Any time you update your site >> -- write a new blog post, add a footer link, or whatever -- you re-render >> each page as an HTML file. After that, upload those static files to your >> web server. >> >> This is *extremely* fast, secure, and cheap. Your hosting will only serve >> static files, and you won't have to keep processes running for the Python >> interpreter, the database, or any other caching layers. >> >> I've used Jekyll [http://jekyllrb.com/] in the past, but there are >> definitely others. This one works with Django templates, it seems: >> https://github.com/koenbok/cactus. >> >> If you want fancy dynamic stuff, you can always make async JS calls after >> the page has loaded. >> > > Good call. > > This [1] is generated with Tinkerer and hosted by GitHub Pages [2], which > is backed by a CDN (Fastly); with HTTPS. > >> This blog is created from reStructuredText > sources hosted by GitHub > which are processed by > Tinkerer (source > ), which extends Sphinx > (source > , wikipedia > ). > > ... Sphinx renders to HTML through Jinja2 templates. > > For JS, cdnjs [3] is backed by CloudFlare [4]. > > CloudFlare has a pretty cool CDN offering that adds an X-Forwarded-For > header with the source IP. > > > [1] https://westurner.github.io/2013/11/25/hello-world.html > [2] https://pages.github.com/ > [3] https://github.com/cdnjs/cdnjs > [4] https://cdnjs.com/ > [5] https://www.cloudflare.com/overview > > >> >> -- Eric >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >> > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From bob.haffner at gmail.com Tue Jan 20 22:57:22 2015 From: bob.haffner at gmail.com (Bob Haffner) Date: Tue, 20 Jan 2015 15:57:22 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: Starting at 6 is fine by me. However, I will be probably be around 30 minutes late if thats ok? On Tue, Jan 20, 2015 at 3:19 PM, Varun Mehta wrote: > upvote - 6pm. > > -Varun > > On Jan 20, 2015, at 3:08 PM, Jeff Hinrichs - DM&T > wrote: > > > +1 Aaron's request for 6pm. > > > > If moving to 6pm creates a problem for anyone who would have otherwise > > attended, please speak up. > > > > On Tue, Jan 20, 2015 at 2:49 PM, Aaron Keck wrote: > > > >> If it were up to me, I'd vote 6pm, but I'm not too picky over half an > hour. > >> 7pm meetings tend to wrap up around 9pm, which makes my wife a bit > cranky. > >> > >> On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T < > jeffh at dundeemt.com> > >> wrote: > >> > >>> Earlier is fine, especially if requested by the person hosting or the > >> group > >>> as a whole. > >>> > >>> Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, > for > >>> those who plan on attending, would an earlier meeting time work better > >> for > >>> you? > >>> > >>> > >>> Side note: If it would positively affect the number of people who > >> attend, I > >>> am in favor of changing the meeting time in general. > >>> > >>> Best, > >>> Jeff > >>> > >>> On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck wrote: > >>> > >>>> I think I'm available and Gordmans would be happy to host, but I'd be > a > >>>> proponent of shifting things a bit earlier to 6:30 or 6:00 even. > >>> Whichever > >>>> works easiest for the group. > >>>> > >>>> On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner > >>>> wrote: > >>>> > >>>>> I'm in. Gordmans would be fantastic is Aaron was willing. If not, > >>>>> Panera on 78th and Dodge or another centrally located place > >>>>> > >>>>> Not sure on topics. I'm open. > >>>>> > >>>>> Sent from my iPhone > >>>>> > >>>>>> On Jan 20, 2015, at 9:37 AM, Steve Young < > >> wereapwhatwesow at gmail.com> > >>>>> wrote: > >>>>>> > >>>>>> It is time for the first meeting for 2015! > >>>>>> > >>>>>> Unfortunately I have a full day Wednesday and most likely will not > >> be > >>>>> able > >>>>>> to attend, and definitely will not be able to host. > >>>>>> > >>>>>> Reply if you can attend and include meeting place and topic > >>>> suggestions. > >>>>>> > >>>>>> Steve > >>>>>> _______________________________________________ > >>>>>> Omaha Python Users Group mailing list > >>>>>> Omaha at python.org > >>>>>> https://mail.python.org/mailman/listinfo/omaha > >>>>>> http://www.OmahaPython.org > >>>>> _______________________________________________ > >>>>> Omaha Python Users Group mailing list > >>>>> Omaha at python.org > >>>>> https://mail.python.org/mailman/listinfo/omaha > >>>>> http://www.OmahaPython.org > >>>>> > >>>> _______________________________________________ > >>>> Omaha Python Users Group mailing list > >>>> Omaha at python.org > >>>> https://mail.python.org/mailman/listinfo/omaha > >>>> http://www.OmahaPython.org > >>>> > >>> > >>> > >>> > >>> -- > >>> Best, > >>> > >>> Jeff Hinrichs > >>> 402.218.1473 > >>> _______________________________________________ > >>> Omaha Python Users Group mailing list > >>> Omaha at python.org > >>> https://mail.python.org/mailman/listinfo/omaha > >>> http://www.OmahaPython.org > >>> > >> _______________________________________________ > >> Omaha Python Users Group mailing list > >> Omaha at python.org > >> https://mail.python.org/mailman/listinfo/omaha > >> http://www.OmahaPython.org > >> > > > > > > > > -- > > Best, > > > > Jeff Hinrichs > > 402.218.1473 > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From keckbug at gmail.com Tue Jan 20 22:59:23 2015 From: keckbug at gmail.com (Aaron Keck) Date: Tue, 20 Jan 2015 15:59:23 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: Shouldn't be a problem... shoot the group or I an email when you're here so we can let you in the doors. On Tue, Jan 20, 2015 at 3:57 PM, Bob Haffner wrote: > Starting at 6 is fine by me. However, I will be probably be around 30 > minutes late if thats ok? > > On Tue, Jan 20, 2015 at 3:19 PM, Varun Mehta > wrote: > > > upvote - 6pm. > > > > -Varun > > > > On Jan 20, 2015, at 3:08 PM, Jeff Hinrichs - DM&T > > wrote: > > > > > +1 Aaron's request for 6pm. > > > > > > If moving to 6pm creates a problem for anyone who would have otherwise > > > attended, please speak up. > > > > > > On Tue, Jan 20, 2015 at 2:49 PM, Aaron Keck wrote: > > > > > >> If it were up to me, I'd vote 6pm, but I'm not too picky over half an > > hour. > > >> 7pm meetings tend to wrap up around 9pm, which makes my wife a bit > > cranky. > > >> > > >> On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T < > > jeffh at dundeemt.com> > > >> wrote: > > >> > > >>> Earlier is fine, especially if requested by the person hosting or the > > >> group > > >>> as a whole. > > >>> > > >>> Aaron, you asked for 6 or 6:30 pm. Do you have a preference? Also, > > for > > >>> those who plan on attending, would an earlier meeting time work > better > > >> for > > >>> you? > > >>> > > >>> > > >>> Side note: If it would positively affect the number of people who > > >> attend, I > > >>> am in favor of changing the meeting time in general. > > >>> > > >>> Best, > > >>> Jeff > > >>> > > >>> On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck > wrote: > > >>> > > >>>> I think I'm available and Gordmans would be happy to host, but I'd > be > > a > > >>>> proponent of shifting things a bit earlier to 6:30 or 6:00 even. > > >>> Whichever > > >>>> works easiest for the group. > > >>>> > > >>>> On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner > > > >>>> wrote: > > >>>> > > >>>>> I'm in. Gordmans would be fantastic is Aaron was willing. If > not, > > >>>>> Panera on 78th and Dodge or another centrally located place > > >>>>> > > >>>>> Not sure on topics. I'm open. > > >>>>> > > >>>>> Sent from my iPhone > > >>>>> > > >>>>>> On Jan 20, 2015, at 9:37 AM, Steve Young < > > >> wereapwhatwesow at gmail.com> > > >>>>> wrote: > > >>>>>> > > >>>>>> It is time for the first meeting for 2015! > > >>>>>> > > >>>>>> Unfortunately I have a full day Wednesday and most likely will not > > >> be > > >>>>> able > > >>>>>> to attend, and definitely will not be able to host. > > >>>>>> > > >>>>>> Reply if you can attend and include meeting place and topic > > >>>> suggestions. > > >>>>>> > > >>>>>> Steve > > >>>>>> _______________________________________________ > > >>>>>> Omaha Python Users Group mailing list > > >>>>>> Omaha at python.org > > >>>>>> https://mail.python.org/mailman/listinfo/omaha > > >>>>>> http://www.OmahaPython.org > > >>>>> _______________________________________________ > > >>>>> Omaha Python Users Group mailing list > > >>>>> Omaha at python.org > > >>>>> https://mail.python.org/mailman/listinfo/omaha > > >>>>> http://www.OmahaPython.org > > >>>>> > > >>>> _______________________________________________ > > >>>> Omaha Python Users Group mailing list > > >>>> Omaha at python.org > > >>>> https://mail.python.org/mailman/listinfo/omaha > > >>>> http://www.OmahaPython.org > > >>>> > > >>> > > >>> > > >>> > > >>> -- > > >>> Best, > > >>> > > >>> Jeff Hinrichs > > >>> 402.218.1473 > > >>> _______________________________________________ > > >>> Omaha Python Users Group mailing list > > >>> Omaha at python.org > > >>> https://mail.python.org/mailman/listinfo/omaha > > >>> http://www.OmahaPython.org > > >>> > > >> _______________________________________________ > > >> Omaha Python Users Group mailing list > > >> Omaha at python.org > > >> https://mail.python.org/mailman/listinfo/omaha > > >> http://www.OmahaPython.org > > >> > > > > > > > > > > > > -- > > > Best, > > > > > > Jeff Hinrichs > > > 402.218.1473 > > > _______________________________________________ > > > Omaha Python Users Group mailing list > > > Omaha at python.org > > > https://mail.python.org/mailman/listinfo/omaha > > > http://www.OmahaPython.org > > > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From bob.haffner at gmail.com Tue Jan 20 23:05:21 2015 From: bob.haffner at gmail.com (Bob Haffner) Date: Tue, 20 Jan 2015 16:05:21 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <36E017F8-06CD-4482-A9E8-EE627992AF4F@gmail.com> Message-ID: Thanks Aaron! On Tue, Jan 20, 2015 at 3:59 PM, Aaron Keck wrote: > Shouldn't be a problem... shoot the group or I an email when you're here so > we can let you in the doors. > > On Tue, Jan 20, 2015 at 3:57 PM, Bob Haffner > wrote: > > > Starting at 6 is fine by me. However, I will be probably be around 30 > > minutes late if thats ok? > > > > On Tue, Jan 20, 2015 at 3:19 PM, Varun Mehta > > wrote: > > > > > upvote - 6pm. > > > > > > -Varun > > > > > > On Jan 20, 2015, at 3:08 PM, Jeff Hinrichs - DM&T > > > wrote: > > > > > > > +1 Aaron's request for 6pm. > > > > > > > > If moving to 6pm creates a problem for anyone who would have > otherwise > > > > attended, please speak up. > > > > > > > > On Tue, Jan 20, 2015 at 2:49 PM, Aaron Keck > wrote: > > > > > > > >> If it were up to me, I'd vote 6pm, but I'm not too picky over half > an > > > hour. > > > >> 7pm meetings tend to wrap up around 9pm, which makes my wife a bit > > > cranky. > > > >> > > > >> On Tue, Jan 20, 2015 at 2:44 PM, Jeff Hinrichs - DM&T < > > > jeffh at dundeemt.com> > > > >> wrote: > > > >> > > > >>> Earlier is fine, especially if requested by the person hosting or > the > > > >> group > > > >>> as a whole. > > > >>> > > > >>> Aaron, you asked for 6 or 6:30 pm. Do you have a preference? > Also, > > > for > > > >>> those who plan on attending, would an earlier meeting time work > > better > > > >> for > > > >>> you? > > > >>> > > > >>> > > > >>> Side note: If it would positively affect the number of people who > > > >> attend, I > > > >>> am in favor of changing the meeting time in general. > > > >>> > > > >>> Best, > > > >>> Jeff > > > >>> > > > >>> On Tue, Jan 20, 2015 at 2:38 PM, Aaron Keck > > wrote: > > > >>> > > > >>>> I think I'm available and Gordmans would be happy to host, but I'd > > be > > > a > > > >>>> proponent of shifting things a bit earlier to 6:30 or 6:00 even. > > > >>> Whichever > > > >>>> works easiest for the group. > > > >>>> > > > >>>> On Tue, Jan 20, 2015 at 2:27 PM, Bob Haffner < > bob.haffner at gmail.com > > > > > > >>>> wrote: > > > >>>> > > > >>>>> I'm in. Gordmans would be fantastic is Aaron was willing. If > > not, > > > >>>>> Panera on 78th and Dodge or another centrally located place > > > >>>>> > > > >>>>> Not sure on topics. I'm open. > > > >>>>> > > > >>>>> Sent from my iPhone > > > >>>>> > > > >>>>>> On Jan 20, 2015, at 9:37 AM, Steve Young < > > > >> wereapwhatwesow at gmail.com> > > > >>>>> wrote: > > > >>>>>> > > > >>>>>> It is time for the first meeting for 2015! > > > >>>>>> > > > >>>>>> Unfortunately I have a full day Wednesday and most likely will > not > > > >> be > > > >>>>> able > > > >>>>>> to attend, and definitely will not be able to host. > > > >>>>>> > > > >>>>>> Reply if you can attend and include meeting place and topic > > > >>>> suggestions. > > > >>>>>> > > > >>>>>> Steve > > > >>>>>> _______________________________________________ > > > >>>>>> Omaha Python Users Group mailing list > > > >>>>>> Omaha at python.org > > > >>>>>> https://mail.python.org/mailman/listinfo/omaha > > > >>>>>> http://www.OmahaPython.org > > > >>>>> _______________________________________________ > > > >>>>> Omaha Python Users Group mailing list > > > >>>>> Omaha at python.org > > > >>>>> https://mail.python.org/mailman/listinfo/omaha > > > >>>>> http://www.OmahaPython.org > > > >>>>> > > > >>>> _______________________________________________ > > > >>>> Omaha Python Users Group mailing list > > > >>>> Omaha at python.org > > > >>>> https://mail.python.org/mailman/listinfo/omaha > > > >>>> http://www.OmahaPython.org > > > >>>> > > > >>> > > > >>> > > > >>> > > > >>> -- > > > >>> Best, > > > >>> > > > >>> Jeff Hinrichs > > > >>> 402.218.1473 > > > >>> _______________________________________________ > > > >>> Omaha Python Users Group mailing list > > > >>> Omaha at python.org > > > >>> https://mail.python.org/mailman/listinfo/omaha > > > >>> http://www.OmahaPython.org > > > >>> > > > >> _______________________________________________ > > > >> Omaha Python Users Group mailing list > > > >> Omaha at python.org > > > >> https://mail.python.org/mailman/listinfo/omaha > > > >> http://www.OmahaPython.org > > > >> > > > > > > > > > > > > > > > > -- > > > > Best, > > > > > > > > Jeff Hinrichs > > > > 402.218.1473 > > > > _______________________________________________ > > > > Omaha Python Users Group mailing list > > > > Omaha at python.org > > > > https://mail.python.org/mailman/listinfo/omaha > > > > http://www.OmahaPython.org > > > > > > _______________________________________________ > > > Omaha Python Users Group mailing list > > > Omaha at python.org > > > https://mail.python.org/mailman/listinfo/omaha > > > http://www.OmahaPython.org > > > > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > From jrguliz at yahoo.com Wed Jan 21 22:31:23 2015 From: jrguliz at yahoo.com (Joe Gulizia) Date: Wed, 21 Jan 2015 13:31:23 -0800 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: Message-ID: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> Rough address? ,plan leaving bluffs at 530 Sent from Yahoo Mail on Android From jeffh at dundeemt.com Wed Jan 21 22:59:44 2015 From: jeffh at dundeemt.com (Jeff Hinrichs - DM&T) Date: Wed, 21 Jan 2015 15:59:44 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> References: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> Message-ID: Meeting Tonight - Web site updated http://www.omahapython.org/blog/ rough address: Gordmans Office Building in Aksarben The building is the northwest corner of 67th and Frances and the Gordmans entrance is next to the ?g? sign, about midway along the East side of the building. There?s parking directly out front, but it sometimes fills up in the evenings. The garage around back is open to the public after 5:30 or 6 as well. On Wed, Jan 21, 2015 at 3:31 PM, Joe Gulizia < jrguliz at yahoo.com.dmarc.invalid> wrote: > Rough address? ,plan leaving bluffs at 530 > > Sent from Yahoo Mail on Android > > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > -- Best, Jeff Hinrichs 402.218.1473 From jeffh at dundeemt.com Wed Jan 21 23:01:08 2015 From: jeffh at dundeemt.com (Jeff Hinrichs - DM&T) Date: Wed, 21 Jan 2015 16:01:08 -0600 Subject: [omaha] Meeting Tonight Message-ID: See website for specific details: 6pm @ Gordman's Office building in Aksarben Village -- Best, Jeff Hinrichs 402.218.1473 From keckbug at gmail.com Wed Jan 21 23:23:23 2015 From: keckbug at gmail.com (Aaron) Date: Wed, 21 Jan 2015 16:23:23 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> Message-ID: <23E7C0DB-60B7-4BEF-A8CD-2DB516E6C968@gmail.com> Aksarben Village has been getting BUSY in the evenings. Directly behind the building, under the overhang are spots labeled "Gordmans Visitor Parking". Feel free to use them, as they're likely to be the closest spots available. Of course you're still free to park elsewhere and walk > On Jan 21, 2015, at 3:59 PM, "Jeff Hinrichs - DM&T" wrote: > > Meeting Tonight - Web site updated > http://www.omahapython.org/blog/ > > rough address: > Gordmans Office Building in Aksarben > The building is the northwest corner of 67th and Frances and the Gordmans > entrance is next to the ?g? sign, about midway along the East side of the > building. There?s parking directly out front, but it sometimes fills up in > the evenings. The garage around back is open to the public after 5:30 or 6 > as well. > > On Wed, Jan 21, 2015 at 3:31 PM, Joe Gulizia < > jrguliz at yahoo.com.dmarc.invalid> wrote: > >> Rough address? ,plan leaving bluffs at 530 >> >> Sent from Yahoo Mail on Android >> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org > > > > -- > Best, > > Jeff Hinrichs > 402.218.1473 > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From jeffh at dundeemt.com Thu Jan 22 00:15:25 2015 From: jeffh at dundeemt.com (Jeff Hinrichs - DM&T) Date: Wed, 21 Jan 2015 17:15:25 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: <23E7C0DB-60B7-4BEF-A8CD-2DB516E6C968@gmail.com> References: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> <23E7C0DB-60B7-4BEF-A8CD-2DB516E6C968@gmail.com> Message-ID: Tonight's door prize is "Head First Python" compliments of O'Reilly. -Jeff On Wed, Jan 21, 2015 at 4:23 PM, Aaron wrote: > Aksarben Village has been getting BUSY in the evenings. Directly behind > the building, under the overhang are spots labeled "Gordmans Visitor > Parking". Feel free to use them, as they're likely to be the closest spots > available. > > Of course you're still free to park elsewhere and walk > > > On Jan 21, 2015, at 3:59 PM, "Jeff Hinrichs - DM&T" > wrote: > > > > Meeting Tonight - Web site updated > > http://www.omahapython.org/blog/ > > > > rough address: > > Gordmans Office Building in Aksarben > > The building is the northwest corner of 67th and Frances and the Gordmans > > entrance is next to the ?g? sign, about midway along the East side of the > > building. There?s parking directly out front, but it sometimes fills up > in > > the evenings. The garage around back is open to the public after 5:30 or > 6 > > as well. > > > > On Wed, Jan 21, 2015 at 3:31 PM, Joe Gulizia < > > jrguliz at yahoo.com.dmarc.invalid> wrote: > > > >> Rough address? ,plan leaving bluffs at 530 > >> > >> Sent from Yahoo Mail on Android > >> > >> _______________________________________________ > >> Omaha Python Users Group mailing list > >> Omaha at python.org > >> https://mail.python.org/mailman/listinfo/omaha > >> http://www.OmahaPython.org > > > > > > > > -- > > Best, > > > > Jeff Hinrichs > > 402.218.1473 > > _______________________________________________ > > Omaha Python Users Group mailing list > > Omaha at python.org > > https://mail.python.org/mailman/listinfo/omaha > > http://www.OmahaPython.org > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org > -- Best, Jeff Hinrichs 402.218.1473 From bob.haffner at gmail.com Thu Jan 22 01:53:32 2015 From: bob.haffner at gmail.com (Bob Haffner) Date: Wed, 21 Jan 2015 18:53:32 -0600 Subject: [omaha] January Meeting Wed 1/21/15 In-Reply-To: References: <1421875883.23977.YahooMailAndroidMobile@web126201.mail.ne1.yahoo.com> <23E7C0DB-60B7-4BEF-A8CD-2DB516E6C968@gmail.com> Message-ID: Made it. Can someone let me in? Sent from my iPhone > On Jan 21, 2015, at 5:15 PM, Jeff Hinrichs - DM&T wrote: > > Tonight's door prize is "Head First Python" > compliments of O'Reilly. > > > -Jeff > >> On Wed, Jan 21, 2015 at 4:23 PM, Aaron wrote: >> >> Aksarben Village has been getting BUSY in the evenings. Directly behind >> the building, under the overhang are spots labeled "Gordmans Visitor >> Parking". Feel free to use them, as they're likely to be the closest spots >> available. >> >> Of course you're still free to park elsewhere and walk >> >>>> On Jan 21, 2015, at 3:59 PM, "Jeff Hinrichs - DM&T" >>> wrote: >>> >>> Meeting Tonight - Web site updated >>> http://www.omahapython.org/blog/ >>> >>> rough address: >>> Gordmans Office Building in Aksarben >>> The building is the northwest corner of 67th and Frances and the Gordmans >>> entrance is next to the ?g? sign, about midway along the East side of the >>> building. There?s parking directly out front, but it sometimes fills up >> in >>> the evenings. The garage around back is open to the public after 5:30 or >> 6 >>> as well. >>> >>> On Wed, Jan 21, 2015 at 3:31 PM, Joe Gulizia < >>> jrguliz at yahoo.com.dmarc.invalid> wrote: >>> >>>> Rough address? ,plan leaving bluffs at 530 >>>> >>>> Sent from Yahoo Mail on Android >>>> >>>> _______________________________________________ >>>> Omaha Python Users Group mailing list >>>> Omaha at python.org >>>> https://mail.python.org/mailman/listinfo/omaha >>>> http://www.OmahaPython.org >>> >>> >>> >>> -- >>> Best, >>> >>> Jeff Hinrichs >>> 402.218.1473 >>> _______________________________________________ >>> Omaha Python Users Group mailing list >>> Omaha at python.org >>> https://mail.python.org/mailman/listinfo/omaha >>> http://www.OmahaPython.org >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org > > > > -- > Best, > > Jeff Hinrichs > 402.218.1473 > _______________________________________________ > Omaha Python Users Group mailing list > Omaha at python.org > https://mail.python.org/mailman/listinfo/omaha > http://www.OmahaPython.org From varun.sagi20 at gmail.com Thu Jan 22 03:08:18 2015 From: varun.sagi20 at gmail.com (Varun Mehta) Date: Wed, 21 Jan 2015 20:08:18 -0600 Subject: [omaha] Optimize database queries! In-Reply-To: <91D5B691-A950-4DCD-ADAD-1A655AD190C8@gmail.com> References: <92A6C896-1A99-487E-BB47-C5D584B3A077@gmail.com> <91D5B691-A950-4DCD-ADAD-1A655AD190C8@gmail.com> Message-ID: <91A29157-1545-42D3-8846-ABDA0BACD0C8@gmail.com> http://interactivepython.org/runestone/default/user/login Varun On Jan 20, 2015, at 3:21 PM, Varun Mehta wrote: > I have not deployed my blog yet. :( > But underlying idea is to learn all frequently used features for a django project. > And cache is definitely one. > > Static pages definitely seems like a wonderful option. > > -Varun > > On Jan 20, 2015, at 2:53 PM, Wes Turner wrote: > >> On Tue, Jan 20, 2015 at 1:33 PM, Eric Edens wrote: >> >>> Redis and memcached? How popular is your blog? :) >>> >>> Have you considered a static site generator? Any time you update your site >>> -- write a new blog post, add a footer link, or whatever -- you re-render >>> each page as an HTML file. After that, upload those static files to your >>> web server. >>> >>> This is *extremely* fast, secure, and cheap. Your hosting will only serve >>> static files, and you won't have to keep processes running for the Python >>> interpreter, the database, or any other caching layers. >>> >>> I've used Jekyll [http://jekyllrb.com/] in the past, but there are >>> definitely others. This one works with Django templates, it seems: >>> https://github.com/koenbok/cactus. >>> >>> If you want fancy dynamic stuff, you can always make async JS calls after >>> the page has loaded. >>> >> >> Good call. >> >> This [1] is generated with Tinkerer and hosted by GitHub Pages [2], which >> is backed by a CDN (Fastly); with HTTPS. >> >>> This blog is created from reStructuredText >> sources hosted by GitHub >> which are processed by >> Tinkerer (source >> ), which extends Sphinx >> (source >> , wikipedia >> ). >> >> ... Sphinx renders to HTML through Jinja2 templates. >> >> For JS, cdnjs [3] is backed by CloudFlare [4]. >> >> CloudFlare has a pretty cool CDN offering that adds an X-Forwarded-For >> header with the source IP. >> >> >> [1] https://westurner.github.io/2013/11/25/hello-world.html >> [2] https://pages.github.com/ >> [3] https://github.com/cdnjs/cdnjs >> [4] https://cdnjs.com/ >> [5] https://www.cloudflare.com/overview >> >> >>> >>> -- Eric >>> _______________________________________________ >>> Omaha Python Users Group mailing list >>> Omaha at python.org >>> https://mail.python.org/mailman/listinfo/omaha >>> http://www.OmahaPython.org >>> >> _______________________________________________ >> Omaha Python Users Group mailing list >> Omaha at python.org >> https://mail.python.org/mailman/listinfo/omaha >> http://www.OmahaPython.org >