[Numpy-discussion] einsum

Mark Wiebe mwwiebe at gmail.com
Wed Jan 26 15:27:51 EST 2011


I wrote a new function, einsum, which implements Einstein summation
notation, and I'd like comments/thoughts from people who might be interested
in this kind of thing.

In testing it, it is also faster than many of NumPy's built-in functions,
except for dot and inner.  At the bottom of this email you can find the
documentation blurb I wrote for it, and here are some timings:

In [1]: import numpy as np
In [2]: a = np.arange(25).reshape(5,5)

In [3]: timeit np.einsum('ii', a)
100000 loops, best of 3: 3.45 us per loop
In [4]: timeit np.trace(a)
100000 loops, best of 3: 9.8 us per loop

In [5]: timeit np.einsum('ii->i', a)
1000000 loops, best of 3: 1.19 us per loop
In [6]: timeit np.diag(a)
100000 loops, best of 3: 7 us per loop

In [7]: b = np.arange(30).reshape(5,6)

In [8]: timeit np.einsum('ij,jk', a, b)
10000 loops, best of 3: 11.4 us per loop
In [9]: timeit np.dot(a, b)
100000 loops, best of 3: 2.8 us per loop

In [10]: a = np.arange(10000.)

In [11]: timeit np.einsum('i->', a)
10000 loops, best of 3: 22.1 us per loop
In [12]: timeit np.sum(a)
10000 loops, best of 3: 25.5 us per loop

-Mark

The documentation:

    einsum(subscripts, *operands, out=None, dtype=None, order='K',
casting='safe')

    Evaluates the Einstein summation convention on the operands.

    Using the Einstein summation convention, many common multi-dimensional
    array operations can be represented in a simple fashion.  This function
    provides a way compute such summations.

    The best way to understand this function is to try the examples below,
    which show how many common NumPy functions can be implemented as
    calls to einsum.

    The subscripts string is a comma-separated list of subscript labels,
    where each label refers to a dimension of the corresponding operand.
    Repeated subscripts labels in one operand take the diagonal.  For
example,
    ``np.einsum('ii', a)`` is equivalent to ``np.trace(a)``.

    Whenever a label is repeated, it is summed, so ``np.einsum('i,i', a,
b)``
    is equivalent to ``np.inner(a,b)``.  If a label appears only once,
    it is not summed, so ``np.einsum('i', a)`` produces a view of ``a``
    with no changes.

    The order of labels in the output is by default alphabetical.  This
    means that ``np.einsum('ij', a)`` doesn't affect a 2D array, while
    ``np.einsum('ji', a)`` takes its transpose.

    The output can be controlled by specifying output subscript labels
    as well.  This specifies the label order, and allows summing to be
    disallowed or forced when desired.  The call ``np.einsum('i->', a)``
    is equivalent to ``np.sum(a, axis=-1)``, and
    ``np.einsum('ii->i', a)`` is equivalent to ``np.diag(a)``.

    It is also possible to control how broadcasting occurs using
    an ellipsis.  To take the trace along the first and last axes,
    you can do ``np.einsum('i...i', a)``, or to do a matrix-matrix
    product with the left-most indices instead of rightmost, you can do
    ``np.einsum('ij...,jk...->ik...', a, b)``.

    When there is only one operand, no axes are summed, and no output
    parameter is provided, a view into the operand is returned instead
    of a new array.  Thus, taking the diagonal as ``np.einsum('ii->i', a)``
    produces a view.

    Parameters
    ----------
    subscripts : string
        Specifies the subscripts for summation.
    operands : list of array_like
        These are the arrays for the operation.
    out : None or array
        If provided, the calculation is done into this array.
    dtype : None or data type
        If provided, forces the calculation to use the data type specified.
        Note that you may have to also give a more liberal ``casting``
        parameter to allow the conversions.
    order : 'C', 'F', 'A', or 'K'
        Controls the memory layout of the output. 'C' means it should
        be Fortran contiguous. 'F' means it should be Fortran contiguous,
        'A' means it should be 'F' if the inputs are all 'F', 'C' otherwise.
        'K' means it should be as close to the layout as the inputs as
        is possible, including arbitrarily permuted axes.
    casting : 'no', 'equiv', 'safe', 'same_kind', 'unsafe'
        Controls what kind of data casting may occur.  Setting this to
        'unsafe' is not recommended, as it can adversely affect
accumulations.
        'no' means the data types should not be cast at all. 'equiv' means
        only byte-order changes are allowed. 'safe' means only casts
        which can preserve values are allowed. 'same_kind' means only
        safe casts or casts within a kind, like float64 to float32, are
        allowed.  'unsafe' means any data conversions may be done.

    Returns
    -------
    output : ndarray
        The calculation based on the Einstein summation convention.

    See Also
    --------
    dot, inner, outer, tensordot


    Examples
    --------

    >>> a = np.arange(25).reshape(5,5)
    >>> b = np.arange(5)
    >>> c = np.arange(6).reshape(2,3)

    >>> np.einsum('ii', a)
    60
    >>> np.trace(a)
    60

    >>> np.einsum('ii->i', a)
    array([ 0,  6, 12, 18, 24])
    >>> np.diag(a)
    array([ 0,  6, 12, 18, 24])

    >>> np.einsum('ij,j', a, b)
    array([ 30,  80, 130, 180, 230])
    >>> np.dot(a, b)
    array([ 30,  80, 130, 180, 230])

    >>> np.einsum('ji', c)
    array([[0, 3],
           [1, 4],
           [2, 5]])
    >>> c.T
    array([[0, 3],
           [1, 4],
           [2, 5]])

    >>> np.einsum(',', 3, c)
    array([[ 0,  3,  6],
           [ 9, 12, 15]])
    >>> np.multiply(3, c)
    array([[ 0,  3,  6],
           [ 9, 12, 15]])

    >>> np.einsum('i,i', b, b)
    30
    >>> np.inner(b,b)
    30

    >>> np.einsum('i,j', np.arange(2)+1, b)
    array([[0, 1, 2, 3, 4],
           [0, 2, 4, 6, 8]])
    >>> np.outer(np.arange(2)+1, b)
    array([[0, 1, 2, 3, 4],
           [0, 2, 4, 6, 8]])

    >>> np.einsum('i...->', a)
    array([50, 55, 60, 65, 70])
    >>> np.sum(a, axis=0)
    array([50, 55, 60, 65, 70])

    >>> a = np.arange(60.).reshape(3,4,5)
    >>> b = np.arange(24.).reshape(4,3,2)
    >>> np.einsum('ijk,jil->kl', a, b)
    array([[ 4400.,  4730.],
           [ 4532.,  4874.],
           [ 4664.,  5018.],
           [ 4796.,  5162.],
           [ 4928.,  5306.]])
    >>> np.tensordot(a,b, axes=([1,0],[0,1]))
    array([[ 4400.,  4730.],
           [ 4532.,  4874.],
           [ 4664.,  5018.],
           [ 4796.,  5162.],
           [ 4928.,  5306.]])
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.python.org/pipermail/numpy-discussion/attachments/20110126/551391aa/attachment.html>


More information about the NumPy-Discussion mailing list