From walker.ab at gmail.com Wed Jan 1 07:50:29 2014 From: walker.ab at gmail.com (Andrew Walker) Date: Wed, 1 Jan 2014 17:50:29 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: Message-ID: Was there a final decision on whether there would be an informal MPUG pub night? I think it would a nice idea to catch up early. Andrew On 21/12/2013, at 9:49 PM, Richard Jones wrote: > We've tended to not bother with a Jan meeting around the usual time, though there has sometimes been a less formal gathering at a pub some time around mid Jan when people are slightly more likely to be around. I might put forward a date for that so I can actually turn up given my inability to make it to recent meetings :) > > > Richard > > > On 21 December 2013 20:36, Bianca Gibson wrote: > Hi everyone, > Are we having a January meeting? The first Monday of the month (6th of Jan) is during linux.conf.au, so probably not a good date. > > Cheers, > Bianca > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS e-mail: walker.ab at gmail.com mob: 0409 994 810 From r1chardj0n3s at gmail.com Thu Jan 2 06:12:36 2014 From: r1chardj0n3s at gmail.com (Richard Jones) Date: Thu, 2 Jan 2014 16:12:36 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: Message-ID: Yes! There will be an informal pub meetup next Monday. Who's in? Venue (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending on the actual participants :) Richard On 1 January 2014 17:50, Andrew Walker wrote: > Was there a final decision on whether there would be an informal MPUG pub > night? > > I think it would a nice idea to catch up early. > > Andrew > > > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > > > We've tended to not bother with a Jan meeting around the usual time, > though there has sometimes been a less formal gathering at a pub some time > around mid Jan when people are slightly more likely to be around. I might > put forward a date for that so I can actually turn up given my inability to > make it to recent meetings :) > > > > > > Richard > > > > > > On 21 December 2013 20:36, Bianca Gibson > wrote: > > Hi everyone, > > Are we having a January meeting? The first Monday of the month (6th of > Jan) is during linux.conf.au, so probably not a good date. > > > > Cheers, > > Bianca > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > e-mail: walker.ab at gmail.com > mob: 0409 994 810 > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -------------- next part -------------- An HTML attachment was scrubbed... URL: From walker.ab at gmail.com Sun Jan 5 00:30:28 2014 From: walker.ab at gmail.com (Andrew Walker) Date: Sun, 5 Jan 2014 10:30:28 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: Message-ID: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> I'm in Close to public transport would be a win for me Andrew On 02/01/2014, at 4:12 PM, Richard Jones wrote: > Yes! There will be an informal pub meetup next Monday. Who's in? Venue (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending on the actual participants :) > > > Richard > > > On 1 January 2014 17:50, Andrew Walker wrote: > Was there a final decision on whether there would be an informal MPUG pub night? > > I think it would a nice idea to catch up early. > > Andrew > > > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > > > We've tended to not bother with a Jan meeting around the usual time, though there has sometimes been a less formal gathering at a pub some time around mid Jan when people are slightly more likely to be around. I might put forward a date for that so I can actually turn up given my inability to make it to recent meetings :) > > > > > > Richard > > > > > > On 21 December 2013 20:36, Bianca Gibson wrote: > > Hi everyone, > > Are we having a January meeting? The first Monday of the month (6th of Jan) is during linux.conf.au, so probably not a good date. > > > > Cheers, > > Bianca > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > e-mail: walker.ab at gmail.com > mob: 0409 994 810 > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS e-mail: walker.ab at gmail.com mob: 0409 994 810 From javier at candeira.com Sun Jan 5 13:30:22 2014 From: javier at candeira.com (Javier Candeira) Date: Sun, 5 Jan 2014 23:30:22 +1100 Subject: [melbourne-pug] Adversus Python 3 Message-ID: Armin Ronacher rants against the changes in Unicode support from 2.7 to 3.x: From javier at candeira.com Sun Jan 5 13:30:44 2014 From: javier at candeira.com (Javier Candeira) Date: Sun, 5 Jan 2014 23:30:44 +1100 Subject: [melbourne-pug] Adversus Python 3 In-Reply-To: References: Message-ID: Oops, I hit "send" too early: http://lucumr.pocoo.org/2014/1/5/unicode-in-2-and-3/ J On Sun, Jan 5, 2014 at 11:30 PM, Javier Candeira wrote: > Armin Ronacher rants against the changes in Unicode support from 2.7 to 3.x: From r1chardj0n3s at gmail.com Mon Jan 6 01:25:25 2014 From: r1chardj0n3s at gmail.com (Richard Jones) Date: Mon, 6 Jan 2014 11:25:25 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: Is anyone else up for this? Otherwise it'll just be me, Andrew and a couple of pints :) I guess a bunch of people are probably off at LA... Richard On 5 January 2014 10:30, Andrew Walker wrote: > I'm in > > Close to public transport would be a win for me > > Andrew > > On 02/01/2014, at 4:12 PM, Richard Jones wrote: > > > Yes! There will be an informal pub meetup next Monday. Who's in? Venue > (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending > on the actual participants :) > > > > > > Richard > > > > > > On 1 January 2014 17:50, Andrew Walker wrote: > > Was there a final decision on whether there would be an informal MPUG > pub night? > > > > I think it would a nice idea to catch up early. > > > > Andrew > > > > > > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > > > > > We've tended to not bother with a Jan meeting around the usual time, > though there has sometimes been a less formal gathering at a pub some time > around mid Jan when people are slightly more likely to be around. I might > put forward a date for that so I can actually turn up given my inability to > make it to recent meetings :) > > > > > > > > > Richard > > > > > > > > > On 21 December 2013 20:36, Bianca Gibson < > bianca.rachel.gibson at gmail.com> wrote: > > > Hi everyone, > > > Are we having a January meeting? The first Monday of the month (6th of > Jan) is during linux.conf.au, so probably not a good date. > > > > > > Cheers, > > > Bianca > > > > > > _______________________________________________ > > > melbourne-pug mailing list > > > melbourne-pug at python.org > > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > > > > _______________________________________________ > > > melbourne-pug mailing list > > > melbourne-pug at python.org > > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > > e-mail: walker.ab at gmail.com > > mob: 0409 994 810 > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > e-mail: walker.ab at gmail.com > mob: 0409 994 810 > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tleeuwenburg at gmail.com Mon Jan 6 01:51:55 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 6 Jan 2014 11:51:55 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: I'm only going to know at the last minute. I can ping the list around 4.30pm. A few pints with you both sounds like a fine way to spend Monday evening :) -T On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones wrote: > Is anyone else up for this? Otherwise it'll just be me, Andrew and a > couple of pints :) > > I guess a bunch of people are probably off at LA... > > > Richard > > > On 5 January 2014 10:30, Andrew Walker wrote: > >> I'm in >> >> Close to public transport would be a win for me >> >> Andrew >> >> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >> >> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >> on the actual participants :) >> > >> > >> > Richard >> > >> > >> > On 1 January 2014 17:50, Andrew Walker wrote: >> > Was there a final decision on whether there would be an informal MPUG >> pub night? >> > >> > I think it would a nice idea to catch up early. >> > >> > Andrew >> > >> > >> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >> > >> > > We've tended to not bother with a Jan meeting around the usual time, >> though there has sometimes been a less formal gathering at a pub some time >> around mid Jan when people are slightly more likely to be around. I might >> put forward a date for that so I can actually turn up given my inability to >> make it to recent meetings :) >> > > >> > > >> > > Richard >> > > >> > > >> > > On 21 December 2013 20:36, Bianca Gibson < >> bianca.rachel.gibson at gmail.com> wrote: >> > > Hi everyone, >> > > Are we having a January meeting? The first Monday of the month (6th >> of Jan) is during linux.conf.au, so probably not a good date. >> > > >> > > Cheers, >> > > Bianca >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > > >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> > e-mail: walker.ab at gmail.com >> > mob: 0409 994 810 >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> >> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> e-mail: walker.ab at gmail.com >> mob: 0409 994 810 >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From javier at candeira.com Mon Jan 6 01:55:51 2014 From: javier at candeira.com (Javier Candeira) Date: Mon, 6 Jan 2014 11:55:51 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: I'm otherwise engaged with family, but please down an extra pot for me! Wishing I could get away otherwise, J On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones wrote: > Is anyone else up for this? Otherwise it'll just be me, Andrew and a couple > of pints :) > > I guess a bunch of people are probably off at LA... > > > Richard > > > On 5 January 2014 10:30, Andrew Walker wrote: >> >> I'm in >> >> Close to public transport would be a win for me >> >> Andrew >> >> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >> >> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >> > (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >> > on the actual participants :) >> > >> > >> > Richard >> > >> > >> > On 1 January 2014 17:50, Andrew Walker wrote: >> > Was there a final decision on whether there would be an informal MPUG >> > pub night? >> > >> > I think it would a nice idea to catch up early. >> > >> > Andrew >> > >> > >> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >> > >> > > We've tended to not bother with a Jan meeting around the usual time, >> > > though there has sometimes been a less formal gathering at a pub some time >> > > around mid Jan when people are slightly more likely to be around. I might >> > > put forward a date for that so I can actually turn up given my inability to >> > > make it to recent meetings :) >> > > >> > > >> > > Richard >> > > >> > > >> > > On 21 December 2013 20:36, Bianca Gibson >> > > wrote: >> > > Hi everyone, >> > > Are we having a January meeting? The first Monday of the month (6th of >> > > Jan) is during linux.conf.au, so probably not a good date. >> > > >> > > Cheers, >> > > Bianca >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > > >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> > e-mail: walker.ab at gmail.com >> > mob: 0409 994 810 >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> >> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> e-mail: walker.ab at gmail.com >> mob: 0409 994 810 >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug > > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From tleeuwenburg at gmail.com Mon Jan 6 06:46:47 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 6 Jan 2014 16:46:47 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: Right, I'm in. Do we have a venue? I'm fine with city, Richmond or South Yarra. Do we have a time? On Mon, Jan 6, 2014 at 11:51 AM, Tennessee Leeuwenburg < tleeuwenburg at gmail.com> wrote: > I'm only going to know at the last minute. I can ping the list around > 4.30pm. A few pints with you both sounds like a fine way to spend Monday > evening :) > > -T > > > On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones wrote: > >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a >> couple of pints :) >> >> I guess a bunch of people are probably off at LA... >> >> >> Richard >> >> >> On 5 January 2014 10:30, Andrew Walker wrote: >> >>> I'm in >>> >>> Close to public transport would be a win for me >>> >>> Andrew >>> >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >>> >>> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >>> on the actual participants :) >>> > >>> > >>> > Richard >>> > >>> > >>> > On 1 January 2014 17:50, Andrew Walker wrote: >>> > Was there a final decision on whether there would be an informal MPUG >>> pub night? >>> > >>> > I think it would a nice idea to catch up early. >>> > >>> > Andrew >>> > >>> > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >>> > >>> > > We've tended to not bother with a Jan meeting around the usual time, >>> though there has sometimes been a less formal gathering at a pub some time >>> around mid Jan when people are slightly more likely to be around. I might >>> put forward a date for that so I can actually turn up given my inability to >>> make it to recent meetings :) >>> > > >>> > > >>> > > Richard >>> > > >>> > > >>> > > On 21 December 2013 20:36, Bianca Gibson < >>> bianca.rachel.gibson at gmail.com> wrote: >>> > > Hi everyone, >>> > > Are we having a January meeting? The first Monday of the month (6th >>> of Jan) is during linux.conf.au, so probably not a good date. >>> > > >>> > > Cheers, >>> > > Bianca >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > > >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> > e-mail: walker.ab at gmail.com >>> > mob: 0409 994 810 >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> e-mail: walker.ab at gmail.com >>> mob: 0409 994 810 >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From r1chardj0n3s at gmail.com Mon Jan 6 07:09:31 2014 From: r1chardj0n3s at gmail.com (Richard Jones) Date: Mon, 6 Jan 2014 17:09:31 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: OK, slackers... if you're up for it, we'll see you at the Saint and Rogue on Little Collins (down near Southern Cross) at 6pm. Richard On 6 January 2014 11:25, Richard Jones wrote: > Is anyone else up for this? Otherwise it'll just be me, Andrew and a > couple of pints :) > > I guess a bunch of people are probably off at LA... > > > Richard > > > On 5 January 2014 10:30, Andrew Walker wrote: > >> I'm in >> >> Close to public transport would be a win for me >> >> Andrew >> >> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >> >> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >> on the actual participants :) >> > >> > >> > Richard >> > >> > >> > On 1 January 2014 17:50, Andrew Walker wrote: >> > Was there a final decision on whether there would be an informal MPUG >> pub night? >> > >> > I think it would a nice idea to catch up early. >> > >> > Andrew >> > >> > >> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >> > >> > > We've tended to not bother with a Jan meeting around the usual time, >> though there has sometimes been a less formal gathering at a pub some time >> around mid Jan when people are slightly more likely to be around. I might >> put forward a date for that so I can actually turn up given my inability to >> make it to recent meetings :) >> > > >> > > >> > > Richard >> > > >> > > >> > > On 21 December 2013 20:36, Bianca Gibson < >> bianca.rachel.gibson at gmail.com> wrote: >> > > Hi everyone, >> > > Are we having a January meeting? The first Monday of the month (6th >> of Jan) is during linux.conf.au, so probably not a good date. >> > > >> > > Cheers, >> > > Bianca >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > > >> > > >> > > _______________________________________________ >> > > melbourne-pug mailing list >> > > melbourne-pug at python.org >> > > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> > e-mail: walker.ab at gmail.com >> > mob: 0409 994 810 >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> >> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >> e-mail: walker.ab at gmail.com >> mob: 0409 994 810 >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dodgyville at gmail.com Mon Jan 6 08:34:06 2014 From: dodgyville at gmail.com (Luke Miller) Date: Mon, 06 Jan 2014 18:34:06 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 5 Message-ID: It appears to be closed :( melbourne-pug-request at python.org wrote: >Send melbourne-pug mailing list submissions to > melbourne-pug at python.org > >To subscribe or unsubscribe via the World Wide Web, visit > https://mail.python.org/mailman/listinfo/melbourne-pug >or, via email, send a message with subject or body 'help' to > melbourne-pug-request at python.org > >You can reach the person managing the list at > melbourne-pug-owner at python.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of melbourne-pug digest..." > > >Today's Topics: > > 1. Re: January Meeting (Javier Candeira) > 2. Re: January Meeting (Tennessee Leeuwenburg) > 3. Re: January Meeting (Richard Jones) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Mon, 6 Jan 2014 11:55:51 +1100 >From: Javier Candeira >To: Melbourne Python Users Group >Subject: Re: [melbourne-pug] January Meeting >Message-ID: > >Content-Type: text/plain; charset=UTF-8 > >I'm otherwise engaged with family, but please down an extra pot for me! > >Wishing I could get away otherwise, > >J > >On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones wrote: >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a couple >> of pints :) >> >> I guess a bunch of people are probably off at LA... >> >> >> Richard >> >> >> On 5 January 2014 10:30, Andrew Walker wrote: >>> >>> I'm in >>> >>> Close to public transport would be a win for me >>> >>> Andrew >>> >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >>> >>> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >>> > (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >>> > on the actual participants :) >>> > >>> > >>> > Richard >>> > >>> > >>> > On 1 January 2014 17:50, Andrew Walker wrote: >>> > Was there a final decision on whether there would be an informal MPUG >>> > pub night? >>> > >>> > I think it would a nice idea to catch up early. >>> > >>> > Andrew >>> > >>> > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >>> > >>> > > We've tended to not bother with a Jan meeting around the usual time, >>> > > though there has sometimes been a less formal gathering at a pub some time >>> > > around mid Jan when people are slightly more likely to be around. I might >>> > > put forward a date for that so I can actually turn up given my inability to >>> > > make it to recent meetings :) >>> > > >>> > > >>> > > Richard >>> > > >>> > > >>> > > On 21 December 2013 20:36, Bianca Gibson >>> > > wrote: >>> > > Hi everyone, >>> > > Are we having a January meeting? The first Monday of the month (6th of >>> > > Jan) is during linux.conf.au, so probably not a good date. >>> > > >>> > > Cheers, >>> > > Bianca >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > > >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> > e-mail: walker.ab at gmail.com >>> > mob: 0409 994 810 >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> e-mail: walker.ab at gmail.com >>> mob: 0409 994 810 >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > >------------------------------ > >Message: 2 >Date: Mon, 6 Jan 2014 16:46:47 +1100 >From: Tennessee Leeuwenburg >To: Melbourne Python Users Group >Subject: Re: [melbourne-pug] January Meeting >Message-ID: > >Content-Type: text/plain; charset="iso-8859-1" > >Right, I'm in. Do we have a venue? I'm fine with city, Richmond or South >Yarra. Do we have a time? > > >On Mon, Jan 6, 2014 at 11:51 AM, Tennessee Leeuwenburg < >tleeuwenburg at gmail.com> wrote: > >> I'm only going to know at the last minute. I can ping the list around >> 4.30pm. A few pints with you both sounds like a fine way to spend Monday >> evening :) >> >> -T >> >> >> On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones wrote: >> >>> Is anyone else up for this? Otherwise it'll just be me, Andrew and a >>> couple of pints :) >>> >>> I guess a bunch of people are probably off at LA... >>> >>> >>> Richard >>> >>> >>> On 5 January 2014 10:30, Andrew Walker wrote: >>> >>>> I'm in >>>> >>>> Close to public transport would be a win for me >>>> >>>> Andrew >>>> >>>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >>>> >>>> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >>>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >>>> on the actual participants :) >>>> > >>>> > >>>> > Richard >>>> > >>>> > >>>> > On 1 January 2014 17:50, Andrew Walker wrote: >>>> > Was there a final decision on whether there would be an informal MPUG >>>> pub night? >>>> > >>>> > I think it would a nice idea to catch up early. >>>> > >>>> > Andrew >>>> > >>>> > >>>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >>>> > >>>> > > We've tended to not bother with a Jan meeting around the usual time, >>>> though there has sometimes been a less formal gathering at a pub some time >>>> around mid Jan when people are slightly more likely to be around. I might >>>> put forward a date for that so I can actually turn up given my inability to >>>> make it to recent meetings :) >>>> > > >>>> > > >>>> > > Richard >>>> > > >>>> > > >>>> > > On 21 December 2013 20:36, Bianca Gibson < >>>> bianca.rachel.gibson at gmail.com> wrote: >>>> > > Hi everyone, >>>> > > Are we having a January meeting? The first Monday of the month (6th >>>> of Jan) is during linux.conf.au, so probably not a good date. >>>> > > >>>> > > Cheers, >>>> > > Bianca >>>> > > >>>> > > _______________________________________________ >>>> > > melbourne-pug mailing list >>>> > > melbourne-pug at python.org >>>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>>> > > >>>> > > >>>> > > _______________________________________________ >>>> > > melbourne-pug mailing list >>>> > > melbourne-pug at python.org >>>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>>> > >>>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>>> > e-mail: walker.ab at gmail.com >>>> > mob: 0409 994 810 >>>> > >>>> > _______________________________________________ >>>> > melbourne-pug mailing list >>>> > melbourne-pug at python.org >>>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>>> > >>>> > _______________________________________________ >>>> > melbourne-pug mailing list >>>> > melbourne-pug at python.org >>>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>>> e-mail: walker.ab at gmail.com >>>> mob: 0409 994 810 >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>> >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> > > > >-- >-------------------------------------------------- >Tennessee Leeuwenburg >http://myownhat.blogspot.com/ >"Don't believe everything you think" >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: > >------------------------------ > >Message: 3 >Date: Mon, 6 Jan 2014 17:09:31 +1100 >From: Richard Jones >To: Melbourne Python Users Group >Subject: Re: [melbourne-pug] January Meeting >Message-ID: > >Content-Type: text/plain; charset="iso-8859-1" > >OK, slackers... if you're up for it, we'll see you at the Saint and Rogue >on Little Collins (down near Southern Cross) at 6pm. > > > Richard > > >On 6 January 2014 11:25, Richard Jones wrote: > >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a >> couple of pints :) >> >> I guess a bunch of people are probably off at LA... >> >> >> Richard >> >> >> On 5 January 2014 10:30, Andrew Walker wrote: >> >>> I'm in >>> >>> Close to public transport would be a win for me >>> >>> Andrew >>> >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >>> >>> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >>> on the actual participants :) >>> > >>> > >>> > Richard >>> > >>> > >>> > On 1 January 2014 17:50, Andrew Walker wrote: >>> > Was there a final decision on whether there would be an informal MPUG >>> pub night? >>> > >>> > I think it would a nice idea to catch up early. >>> > >>> > Andrew >>> > >>> > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >>> > >>> > > We've tended to not bother with a Jan meeting around the usual time, >>> though there has sometimes been a less formal gathering at a pub some time >>> around mid Jan when people are slightly more likely to be around. I might >>> put forward a date for that so I can actually turn up given my inability to >>> make it to recent meetings :) >>> > > >>> > > >>> > > Richard >>> > > >>> > > >>> > > On 21 December 2013 20:36, Bianca Gibson < >>> bianca.rachel.gibson at gmail.com> wrote: >>> > > Hi everyone, >>> > > Are we having a January meeting? The first Monday of the month (6th >>> of Jan) is during linux.conf.au, so probably not a good date. >>> > > >>> > > Cheers, >>> > > Bianca >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > > >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> > e-mail: walker.ab at gmail.com >>> > mob: 0409 994 810 >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> e-mail: walker.ab at gmail.com >>> mob: 0409 994 810 >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >> >> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: > >------------------------------ > >Subject: Digest Footer > >_______________________________________________ >melbourne-pug mailing list >melbourne-pug at python.org >https://mail.python.org/mailman/listinfo/melbourne-pug > > >------------------------------ > >End of melbourne-pug Digest, Vol 91, Issue 5 >******************************************** From tleeuwenburg at gmail.com Mon Jan 6 11:11:13 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 6 Jan 2014 21:11:13 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 5 In-Reply-To: References: Message-ID: Hi Luke, Sorry to hear you arrived at a closed venue! Three of us had the same experience, but we didn't see anyone else at the time and nobody had RSVPd, so we went on to another place. It didn't seem appropriate to put up a notice on their front door... Cheers, -T On Mon, Jan 6, 2014 at 6:34 PM, Luke Miller wrote: > It appears to be closed :( > > melbourne-pug-request at python.org wrote: > > >Send melbourne-pug mailing list submissions to > > melbourne-pug at python.org > > > >To subscribe or unsubscribe via the World Wide Web, visit > > https://mail.python.org/mailman/listinfo/melbourne-pug > >or, via email, send a message with subject or body 'help' to > > melbourne-pug-request at python.org > > > >You can reach the person managing the list at > > melbourne-pug-owner at python.org > > > >When replying, please edit your Subject line so it is more specific > >than "Re: Contents of melbourne-pug digest..." > > > > > >Today's Topics: > > > > 1. Re: January Meeting (Javier Candeira) > > 2. Re: January Meeting (Tennessee Leeuwenburg) > > 3. Re: January Meeting (Richard Jones) > > > > > >---------------------------------------------------------------------- > > > >Message: 1 > >Date: Mon, 6 Jan 2014 11:55:51 +1100 > >From: Javier Candeira > >To: Melbourne Python Users Group > >Subject: Re: [melbourne-pug] January Meeting > >Message-ID: > > 6V+Rg2zNoU-o_196aWVvpw30yKfubQ at mail.gmail.com> > >Content-Type: text/plain; charset=UTF-8 > > > >I'm otherwise engaged with family, but please down an extra pot for me! > > > >Wishing I could get away otherwise, > > > >J > > > >On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones > wrote: > >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a > couple > >> of pints :) > >> > >> I guess a bunch of people are probably off at LA... > >> > >> > >> Richard > >> > >> > >> On 5 January 2014 10:30, Andrew Walker wrote: > >>> > >>> I'm in > >>> > >>> Close to public transport would be a win for me > >>> > >>> Andrew > >>> > >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: > >>> > >>> > Yes! There will be an informal pub meetup next Monday. Who's in? > Venue > >>> > (CBD-ish) to be determined. Could be closer to Victoria Gardens, > depending > >>> > on the actual participants :) > >>> > > >>> > > >>> > Richard > >>> > > >>> > > >>> > On 1 January 2014 17:50, Andrew Walker wrote: > >>> > Was there a final decision on whether there would be an informal MPUG > >>> > pub night? > >>> > > >>> > I think it would a nice idea to catch up early. > >>> > > >>> > Andrew > >>> > > >>> > > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > >>> > > >>> > > We've tended to not bother with a Jan meeting around the usual > time, > >>> > > though there has sometimes been a less formal gathering at a pub > some time > >>> > > around mid Jan when people are slightly more likely to be around. > I might > >>> > > put forward a date for that so I can actually turn up given my > inability to > >>> > > make it to recent meetings :) > >>> > > > >>> > > > >>> > > Richard > >>> > > > >>> > > > >>> > > On 21 December 2013 20:36, Bianca Gibson > >>> > > wrote: > >>> > > Hi everyone, > >>> > > Are we having a January meeting? The first Monday of the month > (6th of > >>> > > Jan) is during linux.conf.au, so probably not a good date. > >>> > > > >>> > > Cheers, > >>> > > Bianca > >>> > > > >>> > > _______________________________________________ > >>> > > melbourne-pug mailing list > >>> > > melbourne-pug at python.org > >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > > >>> > > > >>> > > _______________________________________________ > >>> > > melbourne-pug mailing list > >>> > > melbourne-pug at python.org > >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>> > e-mail: walker.ab at gmail.com > >>> > mob: 0409 994 810 > >>> > > >>> > _______________________________________________ > >>> > melbourne-pug mailing list > >>> > melbourne-pug at python.org > >>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > >>> > _______________________________________________ > >>> > melbourne-pug mailing list > >>> > melbourne-pug at python.org > >>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>> e-mail: walker.ab at gmail.com > >>> mob: 0409 994 810 > >>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > > > > > >------------------------------ > > > >Message: 2 > >Date: Mon, 6 Jan 2014 16:46:47 +1100 > >From: Tennessee Leeuwenburg > >To: Melbourne Python Users Group > >Subject: Re: [melbourne-pug] January Meeting > >Message-ID: > > RYtP0q8mR1aXrZp_zPOawzpM2R9EjFHzLP3Bg at mail.gmail.com> > >Content-Type: text/plain; charset="iso-8859-1" > > > >Right, I'm in. Do we have a venue? I'm fine with city, Richmond or South > >Yarra. Do we have a time? > > > > > >On Mon, Jan 6, 2014 at 11:51 AM, Tennessee Leeuwenburg < > >tleeuwenburg at gmail.com> wrote: > > > >> I'm only going to know at the last minute. I can ping the list around > >> 4.30pm. A few pints with you both sounds like a fine way to spend Monday > >> evening :) > >> > >> -T > >> > >> > >> On Mon, Jan 6, 2014 at 11:25 AM, Richard Jones >wrote: > >> > >>> Is anyone else up for this? Otherwise it'll just be me, Andrew and a > >>> couple of pints :) > >>> > >>> I guess a bunch of people are probably off at LA... > >>> > >>> > >>> Richard > >>> > >>> > >>> On 5 January 2014 10:30, Andrew Walker wrote: > >>> > >>>> I'm in > >>>> > >>>> Close to public transport would be a win for me > >>>> > >>>> Andrew > >>>> > >>>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: > >>>> > >>>> > Yes! There will be an informal pub meetup next Monday. Who's in? > Venue > >>>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, > depending > >>>> on the actual participants :) > >>>> > > >>>> > > >>>> > Richard > >>>> > > >>>> > > >>>> > On 1 January 2014 17:50, Andrew Walker wrote: > >>>> > Was there a final decision on whether there would be an informal > MPUG > >>>> pub night? > >>>> > > >>>> > I think it would a nice idea to catch up early. > >>>> > > >>>> > Andrew > >>>> > > >>>> > > >>>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > >>>> > > >>>> > > We've tended to not bother with a Jan meeting around the usual > time, > >>>> though there has sometimes been a less formal gathering at a pub some > time > >>>> around mid Jan when people are slightly more likely to be around. I > might > >>>> put forward a date for that so I can actually turn up given my > inability to > >>>> make it to recent meetings :) > >>>> > > > >>>> > > > >>>> > > Richard > >>>> > > > >>>> > > > >>>> > > On 21 December 2013 20:36, Bianca Gibson < > >>>> bianca.rachel.gibson at gmail.com> wrote: > >>>> > > Hi everyone, > >>>> > > Are we having a January meeting? The first Monday of the month > (6th > >>>> of Jan) is during linux.conf.au, so probably not a good date. > >>>> > > > >>>> > > Cheers, > >>>> > > Bianca > >>>> > > > >>>> > > _______________________________________________ > >>>> > > melbourne-pug mailing list > >>>> > > melbourne-pug at python.org > >>>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > > > >>>> > > > >>>> > > _______________________________________________ > >>>> > > melbourne-pug mailing list > >>>> > > melbourne-pug at python.org > >>>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > > >>>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>>> > e-mail: walker.ab at gmail.com > >>>> > mob: 0409 994 810 > >>>> > > >>>> > _______________________________________________ > >>>> > melbourne-pug mailing list > >>>> > melbourne-pug at python.org > >>>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > > >>>> > _______________________________________________ > >>>> > melbourne-pug mailing list > >>>> > melbourne-pug at python.org > >>>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>>> e-mail: walker.ab at gmail.com > >>>> mob: 0409 994 810 > >>>> > >>>> _______________________________________________ > >>>> melbourne-pug mailing list > >>>> melbourne-pug at python.org > >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>> > >>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >>> > >> > >> > >> -- > >> -------------------------------------------------- > >> Tennessee Leeuwenburg > >> http://myownhat.blogspot.com/ > >> "Don't believe everything you think" > >> > > > > > > > >-- > >-------------------------------------------------- > >Tennessee Leeuwenburg > >http://myownhat.blogspot.com/ > >"Don't believe everything you think" > >-------------- next part -------------- > >An HTML attachment was scrubbed... > >URL: < > http://mail.python.org/pipermail/melbourne-pug/attachments/20140106/76b8c255/attachment-0001.html > > > > > >------------------------------ > > > >Message: 3 > >Date: Mon, 6 Jan 2014 17:09:31 +1100 > >From: Richard Jones > >To: Melbourne Python Users Group > >Subject: Re: [melbourne-pug] January Meeting > >Message-ID: > > < > CAHrZfZAemLzuWp_i6-wiZiCkY6NhfTPsdcg8w3u4eOJM8_GByw at mail.gmail.com> > >Content-Type: text/plain; charset="iso-8859-1" > > > >OK, slackers... if you're up for it, we'll see you at the Saint and Rogue > >on Little Collins (down near Southern Cross) at 6pm. > > > > > > Richard > > > > > >On 6 January 2014 11:25, Richard Jones wrote: > > > >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a > >> couple of pints :) > >> > >> I guess a bunch of people are probably off at LA... > >> > >> > >> Richard > >> > >> > >> On 5 January 2014 10:30, Andrew Walker wrote: > >> > >>> I'm in > >>> > >>> Close to public transport would be a win for me > >>> > >>> Andrew > >>> > >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: > >>> > >>> > Yes! There will be an informal pub meetup next Monday. Who's in? > Venue > >>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, > depending > >>> on the actual participants :) > >>> > > >>> > > >>> > Richard > >>> > > >>> > > >>> > On 1 January 2014 17:50, Andrew Walker wrote: > >>> > Was there a final decision on whether there would be an informal MPUG > >>> pub night? > >>> > > >>> > I think it would a nice idea to catch up early. > >>> > > >>> > Andrew > >>> > > >>> > > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: > >>> > > >>> > > We've tended to not bother with a Jan meeting around the usual > time, > >>> though there has sometimes been a less formal gathering at a pub some > time > >>> around mid Jan when people are slightly more likely to be around. I > might > >>> put forward a date for that so I can actually turn up given my > inability to > >>> make it to recent meetings :) > >>> > > > >>> > > > >>> > > Richard > >>> > > > >>> > > > >>> > > On 21 December 2013 20:36, Bianca Gibson < > >>> bianca.rachel.gibson at gmail.com> wrote: > >>> > > Hi everyone, > >>> > > Are we having a January meeting? The first Monday of the month (6th > >>> of Jan) is during linux.conf.au, so probably not a good date. > >>> > > > >>> > > Cheers, > >>> > > Bianca > >>> > > > >>> > > _______________________________________________ > >>> > > melbourne-pug mailing list > >>> > > melbourne-pug at python.org > >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > > >>> > > > >>> > > _______________________________________________ > >>> > > melbourne-pug mailing list > >>> > > melbourne-pug at python.org > >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>> > e-mail: walker.ab at gmail.com > >>> > mob: 0409 994 810 > >>> > > >>> > _______________________________________________ > >>> > melbourne-pug mailing list > >>> > melbourne-pug at python.org > >>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > > >>> > _______________________________________________ > >>> > melbourne-pug mailing list > >>> > melbourne-pug at python.org > >>> > https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS > >>> e-mail: walker.ab at gmail.com > >>> mob: 0409 994 810 > >>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >> > >> > >-------------- next part -------------- > >An HTML attachment was scrubbed... > >URL: < > http://mail.python.org/pipermail/melbourne-pug/attachments/20140106/3088e1fa/attachment.html > > > > > >------------------------------ > > > >Subject: Digest Footer > > > >_______________________________________________ > >melbourne-pug mailing list > >melbourne-pug at python.org > >https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > >------------------------------ > > > >End of melbourne-pug Digest, Vol 91, Issue 5 > >******************************************** > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From ed at pythoncharmers.com Mon Jan 6 22:21:56 2014 From: ed at pythoncharmers.com (Ed Schofield) Date: Tue, 7 Jan 2014 08:21:56 +1100 Subject: [melbourne-pug] Adversus Python 3 In-Reply-To: References: Message-ID: <0EC8A684-DF88-4920-94D7-775DBB944B54@pythoncharmers.com> Happy New Year, everyone! Nick Coghlan has updated his Python 3 Q&A page to respond to Armin's concerns: http://python-notes.curiousefficiency.org/en/latest/python3/questions_and_answers.html (Armin perhaps suffered most from the string-handling transition because his projects work with wire protocols.) Cheers, Ed -- Dr Edward Schofield + 61 405 676229 > On 5 Jan 2014, at 11:30 pm, Javier Candeira wrote: > > Oops, I hit "send" too early: > > http://lucumr.pocoo.org/2014/1/5/unicode-in-2-and-3/ > > J > >> On Sun, Jan 5, 2014 at 11:30 PM, Javier Candeira wrote: >> Armin Ronacher rants against the changes in Unicode support from 2.7 to 3.x: > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pu -------------- next part -------------- An HTML attachment was scrubbed... URL: From anthony.briggs at gmail.com Mon Jan 13 00:09:17 2014 From: anthony.briggs at gmail.com (Anthony Briggs) Date: Mon, 13 Jan 2014 10:09:17 +1100 Subject: [melbourne-pug] January Meeting In-Reply-To: References: <83D344B8-D716-44EF-8279-9F663032F367@optusnet.com.au> Message-ID: Hmm, for some reason I thought that this was *this* Monday, ie. today. No idea why, advancing old age maybe? :\ In any case, I will/can be in the city this evening, of anyone wants to get together for impromptu drinks or something. Cheers, Anthony On 6 Jan 2014 17:09, "Richard Jones" wrote: > OK, slackers... if you're up for it, we'll see you at the Saint and Rogue > on Little Collins (down near Southern Cross) at 6pm. > > > Richard > > > On 6 January 2014 11:25, Richard Jones wrote: > >> Is anyone else up for this? Otherwise it'll just be me, Andrew and a >> couple of pints :) >> >> I guess a bunch of people are probably off at LA... >> >> >> Richard >> >> >> On 5 January 2014 10:30, Andrew Walker wrote: >> >>> I'm in >>> >>> Close to public transport would be a win for me >>> >>> Andrew >>> >>> On 02/01/2014, at 4:12 PM, Richard Jones wrote: >>> >>> > Yes! There will be an informal pub meetup next Monday. Who's in? Venue >>> (CBD-ish) to be determined. Could be closer to Victoria Gardens, depending >>> on the actual participants :) >>> > >>> > >>> > Richard >>> > >>> > >>> > On 1 January 2014 17:50, Andrew Walker wrote: >>> > Was there a final decision on whether there would be an informal MPUG >>> pub night? >>> > >>> > I think it would a nice idea to catch up early. >>> > >>> > Andrew >>> > >>> > >>> > On 21/12/2013, at 9:49 PM, Richard Jones wrote: >>> > >>> > > We've tended to not bother with a Jan meeting around the usual time, >>> though there has sometimes been a less formal gathering at a pub some time >>> around mid Jan when people are slightly more likely to be around. I might >>> put forward a date for that so I can actually turn up given my inability to >>> make it to recent meetings :) >>> > > >>> > > >>> > > Richard >>> > > >>> > > >>> > > On 21 December 2013 20:36, Bianca Gibson < >>> bianca.rachel.gibson at gmail.com> wrote: >>> > > Hi everyone, >>> > > Are we having a January meeting? The first Monday of the month (6th >>> of Jan) is during linux.conf.au, so probably not a good date. >>> > > >>> > > Cheers, >>> > > Bianca >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > > >>> > > >>> > > _______________________________________________ >>> > > melbourne-pug mailing list >>> > > melbourne-pug at python.org >>> > > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> > e-mail: walker.ab at gmail.com >>> > mob: 0409 994 810 >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> > >>> > _______________________________________________ >>> > melbourne-pug mailing list >>> > melbourne-pug at python.org >>> > https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> Dr Andrew Walker PhD BEng. (Hons) BApp. Sci. QS >>> e-mail: walker.ab at gmail.com >>> mob: 0409 994 810 >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >> >> > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tleeuwenburg at gmail.com Mon Jan 13 10:42:50 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 13 Jan 2014 20:42:50 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app Message-ID: Hey, A question for the peanut gallery... I'm writing a flask/bootstrap web app (not open sourced as yet) for doing some scientific processing in a pipeline data processing methodology. I want to write an example pipeline, but then have the app be deployable in user space and use either a configured directory or a dot-prefix directory for the data of that particular instance of the app. I had imagined this could be like a "layer" over the top of the core application layer, so that users could have their projects side-by-side with the core application examples. I'm now thinking maybe that's a bad idea, and it would be better just to copy the sample projects into the users workspace. In fact I think I've pretty much convinced myself given it took just one sentence to say and seems immediately clear. Are there any other paradigms in web apps for managing the application state (other than packing everything into a database)? The data here exists naturally in a fundamentally file-based paradigm, so I think it makes sense to continue that mainly. Cheers, -Tennessee -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From dalan.miller at gmail.com Mon Jan 13 10:48:13 2014 From: dalan.miller at gmail.com (Daniel Alan Miller) Date: Mon, 13 Jan 2014 20:18:13 +1030 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: Given a specified folfer hierarchy why not just use the files you already have for the data, if I'm understanding correctly? An instance of your application can run and anything within the directory path supplied when you run the application that fits the specification be (Monitored? Used? Consumed?) by the application. On Jan 13, 2014 8:13 PM, "Tennessee Leeuwenburg" wrote: > Hey, > > A question for the peanut gallery... > > I'm writing a flask/bootstrap web app (not open sourced as yet) for doing > some scientific processing in a pipeline data processing methodology. I > want to write an example pipeline, but then have the app be deployable in > user space and use either a configured directory or a dot-prefix directory > for the data of that particular instance of the app. I had imagined this > could be like a "layer" over the top of the core application layer, so that > users could have their projects side-by-side with the core application > examples. > > I'm now thinking maybe that's a bad idea, and it would be better just to > copy the sample projects into the users workspace. > > In fact I think I've pretty much convinced myself given it took just one > sentence to say and seems immediately clear. > > Are there any other paradigms in web apps for managing the application > state (other than packing everything into a database)? The data here exists > naturally in a fundamentally file-based paradigm, so I think it makes sense > to continue that mainly. > > Cheers, > -Tennessee > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tleeuwenburg at gmail.com Mon Jan 13 10:52:21 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 13 Jan 2014 20:52:21 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: I imagine wanting to supply multiple data paths, and want a lazy way to write something that just munges them together into a single list of available projects. Ideally. Falling back to only allowing one configurable directory is reasonable. I can just make it easy to deploy the demo files into a new workspace rather than having them included by the code directly. On Mon, Jan 13, 2014 at 8:48 PM, Daniel Alan Miller wrote: > Given a specified folfer hierarchy why not just use the files you already > have for the data, if I'm understanding correctly? > > An instance of your application can run and anything within the directory > path supplied when you run the application that fits the specification be > (Monitored? Used? Consumed?) by the application. > On Jan 13, 2014 8:13 PM, "Tennessee Leeuwenburg" > wrote: > >> Hey, >> >> A question for the peanut gallery... >> >> I'm writing a flask/bootstrap web app (not open sourced as yet) for doing >> some scientific processing in a pipeline data processing methodology. I >> want to write an example pipeline, but then have the app be deployable in >> user space and use either a configured directory or a dot-prefix directory >> for the data of that particular instance of the app. I had imagined this >> could be like a "layer" over the top of the core application layer, so that >> users could have their projects side-by-side with the core application >> examples. >> >> I'm now thinking maybe that's a bad idea, and it would be better just to >> copy the sample projects into the users workspace. >> >> In fact I think I've pretty much convinced myself given it took just one >> sentence to say and seems immediately clear. >> >> Are there any other paradigms in web apps for managing the application >> state (other than packing everything into a database)? The data here exists >> naturally in a fundamentally file-based paradigm, so I think it makes sense >> to continue that mainly. >> >> Cheers, >> -Tennessee >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From tleeuwenburg at gmail.com Mon Jan 13 10:54:10 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 13 Jan 2014 20:54:10 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: e.g, In an ideal world, I'd like something like /application/example_data/ --> example_one --> example_two ~/.application/data --> project_one --> project_two To look like data/ --> example_one (read only) --> example_two (read only) --> project_one --> project_two But I'm thinking it's a bad concept now. On Mon, Jan 13, 2014 at 8:52 PM, Tennessee Leeuwenburg < tleeuwenburg at gmail.com> wrote: > I imagine wanting to supply multiple data paths, and want a lazy way to > write something that just munges them together into a single list of > available projects. Ideally. Falling back to only allowing one configurable > directory is reasonable. I can just make it easy to deploy the demo files > into a new workspace rather than having them included by the code directly. > > > On Mon, Jan 13, 2014 at 8:48 PM, Daniel Alan Miller < > dalan.miller at gmail.com> wrote: > >> Given a specified folfer hierarchy why not just use the files you already >> have for the data, if I'm understanding correctly? >> >> An instance of your application can run and anything within the directory >> path supplied when you run the application that fits the specification be >> (Monitored? Used? Consumed?) by the application. >> On Jan 13, 2014 8:13 PM, "Tennessee Leeuwenburg" >> wrote: >> >>> Hey, >>> >>> A question for the peanut gallery... >>> >>> I'm writing a flask/bootstrap web app (not open sourced as yet) for >>> doing some scientific processing in a pipeline data processing methodology. >>> I want to write an example pipeline, but then have the app be deployable in >>> user space and use either a configured directory or a dot-prefix directory >>> for the data of that particular instance of the app. I had imagined this >>> could be like a "layer" over the top of the core application layer, so that >>> users could have their projects side-by-side with the core application >>> examples. >>> >>> I'm now thinking maybe that's a bad idea, and it would be better just to >>> copy the sample projects into the users workspace. >>> >>> In fact I think I've pretty much convinced myself given it took just one >>> sentence to say and seems immediately clear. >>> >>> Are there any other paradigms in web apps for managing the application >>> state (other than packing everything into a database)? The data here exists >>> naturally in a fundamentally file-based paradigm, so I think it makes sense >>> to continue that mainly. >>> >>> Cheers, >>> -Tennessee >>> >>> -- >>> -------------------------------------------------- >>> Tennessee Leeuwenburg >>> http://myownhat.blogspot.com/ >>> "Don't believe everything you think" >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From tleeuwenburg at gmail.com Mon Jan 13 10:54:31 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Mon, 13 Jan 2014 20:54:31 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: Oh, and thanks for the reply :) My brain was all business... On Mon, Jan 13, 2014 at 8:54 PM, Tennessee Leeuwenburg < tleeuwenburg at gmail.com> wrote: > e.g, In an ideal world, I'd like something like > > /application/example_data/ > --> example_one > --> example_two > > ~/.application/data > --> project_one > --> project_two > > > To look like > > data/ > --> example_one (read only) > --> example_two (read only) > --> project_one > --> project_two > > But I'm thinking it's a bad concept now. > > > On Mon, Jan 13, 2014 at 8:52 PM, Tennessee Leeuwenburg < > tleeuwenburg at gmail.com> wrote: > >> I imagine wanting to supply multiple data paths, and want a lazy way to >> write something that just munges them together into a single list of >> available projects. Ideally. Falling back to only allowing one configurable >> directory is reasonable. I can just make it easy to deploy the demo files >> into a new workspace rather than having them included by the code directly. >> >> >> On Mon, Jan 13, 2014 at 8:48 PM, Daniel Alan Miller < >> dalan.miller at gmail.com> wrote: >> >>> Given a specified folfer hierarchy why not just use the files you >>> already have for the data, if I'm understanding correctly? >>> >>> An instance of your application can run and anything within the >>> directory path supplied when you run the application that fits the >>> specification be (Monitored? Used? Consumed?) by the application. >>> On Jan 13, 2014 8:13 PM, "Tennessee Leeuwenburg" >>> wrote: >>> >>>> Hey, >>>> >>>> A question for the peanut gallery... >>>> >>>> I'm writing a flask/bootstrap web app (not open sourced as yet) for >>>> doing some scientific processing in a pipeline data processing methodology. >>>> I want to write an example pipeline, but then have the app be deployable in >>>> user space and use either a configured directory or a dot-prefix directory >>>> for the data of that particular instance of the app. I had imagined this >>>> could be like a "layer" over the top of the core application layer, so that >>>> users could have their projects side-by-side with the core application >>>> examples. >>>> >>>> I'm now thinking maybe that's a bad idea, and it would be better just >>>> to copy the sample projects into the users workspace. >>>> >>>> In fact I think I've pretty much convinced myself given it took just >>>> one sentence to say and seems immediately clear. >>>> >>>> Are there any other paradigms in web apps for managing the application >>>> state (other than packing everything into a database)? The data here exists >>>> naturally in a fundamentally file-based paradigm, so I think it makes sense >>>> to continue that mainly. >>>> >>>> Cheers, >>>> -Tennessee >>>> >>>> -- >>>> -------------------------------------------------- >>>> Tennessee Leeuwenburg >>>> http://myownhat.blogspot.com/ >>>> "Don't believe everything you think" >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> > > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From rasjidw at openminddev.net Tue Jan 14 01:29:34 2014 From: rasjidw at openminddev.net (Rasjid Wilcox) Date: Tue, 14 Jan 2014 11:29:34 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: <52D484EE.3060508@openminddev.net> How is you app being deployed? Is it being run behind a standard webserver (eg, Apache), or within a Python based WSGI web-server? If the latter, I would normally just pass in a command line paramater pointing either to a config file or perhaps directly to the project directory in your case. On 13/01/2014 8:42 PM, Tennessee Leeuwenburg wrote: > Hey, > > A question for the peanut gallery... > > I'm writing a flask/bootstrap web app (not open sourced as yet) for > doing some scientific processing in a pipeline data processing > methodology. I want to write an example pipeline, but then have the > app be deployable in user space and use either a configured directory > or a dot-prefix directory for the data of that particular instance of > the app. I had imagined this could be like a "layer" over the top of > the core application layer, so that users could have their projects > side-by-side with the core application examples. > > I'm now thinking maybe that's a bad idea, and it would be better just > to copy the sample projects into the users workspace. > > In fact I think I've pretty much convinced myself given it took just > one sentence to say and seems immediately clear. > > Are there any other paradigms in web apps for managing the application > state (other than packing everything into a database)? The data here > exists naturally in a fundamentally file-based paradigm, so I think it > makes sense to continue that mainly. > > Cheers, > -Tennessee > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug -------------- next part -------------- An HTML attachment was scrubbed... URL: From dcrisp at netspace.net.au Wed Jan 15 01:39:42 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Wed, 15 Jan 2014 11:39:42 +1100 (EST) Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package Message-ID: Hello, I have been looking around for the last hour or so for a PyQT 5.2 Python 2.7 32bit windows package and I havent been able to find one at all. I can find a PyQt 5.2 for Python 3 but not 2.7 Does anybody know where I could find said package? I tried the unofficial windows python binaries site but they only have QtPy 4.9.6 Or do I just need to search harder? Regards, David From tim at growthpath.com.au Wed Jan 15 03:22:36 2014 From: tim at growthpath.com.au (Tim Richardson) Date: Wed, 15 Jan 2014 13:22:36 +1100 Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: Message-ID: "As of this writing, there are no compiled versions supplied on the Riverbanks website as the author is, and I quote ?doing my bit to encourage people to move to Py3? " On Wed, Jan 15, 2014 at 11:39 AM, David Crisp wrote: > Hello, > > I have been looking around for the last hour or so for a PyQT 5.2 Python > 2.7 32bit windows package and I havent been able to find one at all. I can > find a PyQt 5.2 for Python 3 but not 2.7 > > Does anybody know where I could find said package? I tried the > unofficial windows python binaries site but they only have QtPy 4.9.6 > > Or do I just need to search harder? > > Regards, > David > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -- *Tim Richardson, Director* GrowthPath, Data-driven profit growth Mobile: +61 423 091 732 Office: +61 3 8678 1850 I tweet useful business & IT tips at growthpath_au GrowthPath Pty Ltd ABN 76 133 733 963 -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim at growthpath.com.au Wed Jan 15 03:25:10 2014 From: tim at growthpath.com.au (Tim Richardson) Date: Wed, 15 Jan 2014 13:25:10 +1100 Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: Message-ID: Sorry, forgot the link: http://abstractfactory.io/blog/pyqt5-1-1-for-python-2-7/ On Wed, Jan 15, 2014 at 11:39 AM, David Crisp wrote: > Hello, > > I have been looking around for the last hour or so for a PyQT 5.2 Python > 2.7 32bit windows package and I havent been able to find one at all. I can > find a PyQt 5.2 for Python 3 but not 2.7 > > Does anybody know where I could find said package? I tried the > unofficial windows python binaries site but they only have QtPy 4.9.6 > > Or do I just need to search harder? > > Regards, > David > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -- *Tim Richardson, Director* GrowthPath, Data-driven profit growth Mobile: +61 423 091 732 Office: +61 3 8678 1850 I tweet useful business & IT tips at growthpath_au GrowthPath Pty Ltd ABN 76 133 733 963 -------------- next part -------------- An HTML attachment was scrubbed... URL: From dcrisp at netspace.net.au Wed Jan 15 03:45:43 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Wed, 15 Jan 2014 13:45:43 +1100 (EST) Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: Message-ID: THank you for that link, Tim. Interesting reading. That crashing grinding noise you just heard was the sound of the project grinding to a halt... I'm not quite ready to migrate to Python 3 at the moment :( ANd I CERTAINLY dont have the tools or experience to compile PYQT for myself :( On Wed, 15 Jan 2014, Tim Richardson wrote: > "As of this writing, there are no compiled versions supplied on the > Riverbanks website as the author is, and I quote ?doing my bit to encourage > people to move to > Py3? > " > > > On Wed, Jan 15, 2014 at 11:39 AM, David Crisp wrote: > >> Hello, >> >> I have been looking around for the last hour or so for a PyQT 5.2 Python >> 2.7 32bit windows package and I havent been able to find one at all. I can >> find a PyQt 5.2 for Python 3 but not 2.7 >> >> Does anybody know where I could find said package? I tried the >> unofficial windows python binaries site but they only have QtPy 4.9.6 >> >> Or do I just need to search harder? >> >> Regards, >> David >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > > > From miked at dewhirst.com.au Wed Jan 15 07:13:26 2014 From: miked at dewhirst.com.au (Mike Dewhirst) Date: Wed, 15 Jan 2014 17:13:26 +1100 Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: Message-ID: <52D62706.50000@dewhirst.com.au> On 15/01/2014 11:39am, David Crisp wrote: > Hello, > > I have been looking around for the last hour or so for a PyQT 5.2 Python > 2.7 32bit windows package and I havent been able to find one at all. I > can find a PyQt 5.2 for Python 3 but not 2.7 Try http://www.lfd.uci.edu/~gohlke/pythonlibs/ Fabulous resource for Windows ... I get all my stuff which needs to be compiled from there. Mike > > Does anybody know where I could find said package? I tried the > unofficial windows python binaries site but they only have QtPy 4.9.6 > > Or do I just need to search harder? > > Regards, > David > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From dcrisp at netspace.net.au Wed Jan 15 11:42:48 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Wed, 15 Jan 2014 21:42:48 +1100 (EST) Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: <52D62706.50000@dewhirst.com.au> References: <52D62706.50000@dewhirst.com.au> Message-ID: Thanks Mike... thats actually the site I mentioned in paragraph two :) They dont have 5.2 only 4.9.6 :( Thats usually where I go for all my libraries.. this is my first fail :( On Wed, 15 Jan 2014, Mike Dewhirst wrote: > On 15/01/2014 11:39am, David Crisp wrote: >> Hello, >> >> I have been looking around for the last hour or so for a PyQT 5.2 Python >> 2.7 32bit windows package and I havent been able to find one at all. I >> can find a PyQt 5.2 for Python 3 but not 2.7 > > Try http://www.lfd.uci.edu/~gohlke/pythonlibs/ > > Fabulous resource for Windows ... I get all my stuff which needs to be > compiled from there. > > Mike > > >> >> Does anybody know where I could find said package? I tried the >> unofficial windows python binaries site but they only have QtPy 4.9.6 >> >> Or do I just need to search harder? >> >> Regards, >> David >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From miked at dewhirst.com.au Wed Jan 15 22:33:49 2014 From: miked at dewhirst.com.au (Mike Dewhirst) Date: Thu, 16 Jan 2014 08:33:49 +1100 Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: <52D62706.50000@dewhirst.com.au> Message-ID: <52D6FEBD.7040006@dewhirst.com.au> On 15/01/2014 9:42pm, David Crisp wrote: > Thanks Mike... thats actually the site I mentioned in paragraph two :) > They dont have 5.2 only 4.9.6 :( Sorry - I misread PyQt for PyQwt which (obviously coincidentally) is version 5.2.1 Compiling on Windows sucks Mike > > Thats usually where I go for all my libraries.. this is my first fail :( > > > > On Wed, 15 Jan 2014, Mike Dewhirst wrote: > >> On 15/01/2014 11:39am, David Crisp wrote: >>> Hello, >>> >>> I have been looking around for the last hour or so for a PyQT 5.2 Python >>> 2.7 32bit windows package and I havent been able to find one at all. I >>> can find a PyQt 5.2 for Python 3 but not 2.7 >> >> Try http://www.lfd.uci.edu/~gohlke/pythonlibs/ >> >> Fabulous resource for Windows ... I get all my stuff which needs to be >> compiled from there. >> >> Mike >> >> >>> >>> Does anybody know where I could find said package? I tried the >>> unofficial windows python binaries site but they only have QtPy 4.9.6 >>> >>> Or do I just need to search harder? >>> >>> Regards, >>> David >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From tleeuwenburg at gmail.com Thu Jan 16 04:40:05 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Thu, 16 Jan 2014 14:40:05 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: <52D484EE.3060508@openminddev.net> References: <52D484EE.3060508@openminddev.net> Message-ID: Being a massive web app n00b, I am currently just using the builtin web server in Flask to develop for. In terms of operational use, I have free choice of web server, and I haven't yet tried to determine what would be most appropriate. Advice would be appreciated! ... it will be an internal server only, but I'd still like to Do It Right even if it's a simple setup. The main interest for me is to make it really easy to install. I was considering trying to write a deploy script to simplify the process for the user, but I'm not sure if there's a best recommended way for simplifying deployment. I thought the application code could be installed into the Python environment, with a deploy script to create a new workspace and generate an appropriate web server config snippet as well as the command to use the Flask built-in server for development and testing purposes. I'm probably asking some slightly odd questions since this is my first signifiant web app and I don't have much experience with web app architecture. Cheers, -T On Tue, Jan 14, 2014 at 11:29 AM, Rasjid Wilcox wrote: > How is you app being deployed? Is it being run behind a standard > webserver (eg, Apache), or within a Python based WSGI web-server? If the > latter, I would normally just pass in a command line paramater pointing > either to a config file or perhaps directly to the project directory in > your case. > > > On 13/01/2014 8:42 PM, Tennessee Leeuwenburg wrote: > > Hey, > > A question for the peanut gallery... > > I'm writing a flask/bootstrap web app (not open sourced as yet) for doing > some scientific processing in a pipeline data processing methodology. I > want to write an example pipeline, but then have the app be deployable in > user space and use either a configured directory or a dot-prefix directory > for the data of that particular instance of the app. I had imagined this > could be like a "layer" over the top of the core application layer, so that > users could have their projects side-by-side with the core application > examples. > > I'm now thinking maybe that's a bad idea, and it would be better just to > copy the sample projects into the users workspace. > > In fact I think I've pretty much convinced myself given it took just one > sentence to say and seems immediately clear. > > Are there any other paradigms in web apps for managing the application > state (other than packing everything into a database)? The data here exists > naturally in a fundamentally file-based paradigm, so I think it makes sense > to continue that mainly. > > Cheers, > -Tennessee > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > > _______________________________________________ > melbourne-pug mailing listmelbourne-pug at python.orghttps://mail.python.org/mailman/listinfo/melbourne-pug > > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From rasjidw at openminddev.net Thu Jan 16 05:06:53 2014 From: rasjidw at openminddev.net (Rasjid Wilcox) Date: Thu, 16 Jan 2014 15:06:53 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: <52D484EE.3060508@openminddev.net> Message-ID: <52D75ADD.1020108@openminddev.net> Hi Tennessee, Not exactly 'sexy', but I am currently deploying a Bottle app (very similar to Flask) using CherryPy's WSGI server. Note that I'm not using the CherryPy framework, just its WSGI server. Works well on both Windows and Linux. Under Windows I usually deploy with Py2Exe, and Linux I usually deploy by running under Supervisor. There are ways of 'freezing' your app for Linux, but I've never tried them. I had issues running the CherryPy server as a Windows service - which I worked around using a subprocess, but it doesn't sound like you will need to go to that level for what you want. Cheers, Rasjid. On 16/01/2014 2:40 PM, Tennessee Leeuwenburg wrote: > Being a massive web app n00b, I am currently just using the builtin > web server in Flask to develop for. In terms of operational use, I > have free choice of web server, and I haven't yet tried to determine > what would be most appropriate. Advice would be appreciated! ... it > will be an internal server only, but I'd still like to Do It Right > even if it's a simple setup. > > The main interest for me is to make it really easy to install. I was > considering trying to write a deploy script to simplify the process > for the user, but I'm not sure if there's a best recommended way for > simplifying deployment. I thought the application code could be > installed into the Python environment, with a deploy script to create > a new workspace and generate an appropriate web server config snippet > as well as the command to use the Flask built-in server for > development and testing purposes. > > I'm probably asking some slightly odd questions since this is my first > signifiant web app and I don't have much experience with web app > architecture. > > Cheers, > -T > > > On Tue, Jan 14, 2014 at 11:29 AM, Rasjid Wilcox > > wrote: > > How is you app being deployed? Is it being run behind a standard > webserver (eg, Apache), or within a Python based WSGI web-server? > If the latter, I would normally just pass in a command line > paramater pointing either to a config file or perhaps directly to > the project directory in your case. > > > On 13/01/2014 8:42 PM, Tennessee Leeuwenburg wrote: >> Hey, >> >> A question for the peanut gallery... >> >> I'm writing a flask/bootstrap web app (not open sourced as yet) >> for doing some scientific processing in a pipeline data >> processing methodology. I want to write an example pipeline, but >> then have the app be deployable in user space and use either a >> configured directory or a dot-prefix directory for the data of >> that particular instance of the app. I had imagined this could be >> like a "layer" over the top of the core application layer, so >> that users could have their projects side-by-side with the core >> application examples. >> >> I'm now thinking maybe that's a bad idea, and it would be better >> just to copy the sample projects into the users workspace. >> >> In fact I think I've pretty much convinced myself given it took >> just one sentence to say and seems immediately clear. >> >> Are there any other paradigms in web apps for managing the >> application state (other than packing everything into a >> database)? The data here exists naturally in a fundamentally >> file-based paradigm, so I think it makes sense to continue that >> mainly. >> >> Cheers, >> -Tennessee >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug -------------- next part -------------- An HTML attachment was scrubbed... URL: From miked at dewhirst.com.au Thu Jan 16 08:22:34 2014 From: miked at dewhirst.com.au (Mike Dewhirst) Date: Thu, 16 Jan 2014 18:22:34 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: <52D484EE.3060508@openminddev.net> Message-ID: <52D788BA.1020601@dewhirst.com.au> On 16/01/2014 2:40pm, Tennessee Leeuwenburg wrote: > Being a massive web app n00b, Having been there myself well within living memory I think the best advice I can give is to judge the choice of webserver and framework by the quality of the available user support. The most important factor is the documentation. Running a close second is the friendliness and competence of the existing users who answer questions on the mailing lists. Based solely on that I chose Apache and Django. Good luck Mike From noonslists at gmail.com Fri Jan 17 12:12:41 2014 From: noonslists at gmail.com (Noon Silk) Date: Fri, 17 Jan 2014 12:12:41 +0100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: Message-ID: > But I'm thinking it's a bad concept now. I agree that it seems like a bad concept; notably if you just copy the examples over when the user is set up, they can later delete them at their convenience, etc, and they won't be impacted by random changes that you make to the 'core' examples (i.e. they could always go back to the central listing of example projects, and make another copy of it.) You may already know, but the sage cloud has a similar workflow for examples: - https://cloud.sagemath.com/help On Mon, Jan 13, 2014 at 10:54 AM, Tennessee Leeuwenburg < tleeuwenburg at gmail.com> wrote: > e.g, In an ideal world, I'd like something like > > /application/example_data/ > --> example_one > --> example_two > > ~/.application/data > --> project_one > --> project_two > > > To look like > > data/ > --> example_one (read only) > --> example_two (read only) > --> project_one > --> project_two > > But I'm thinking it's a bad concept now. > > > On Mon, Jan 13, 2014 at 8:52 PM, Tennessee Leeuwenburg < > tleeuwenburg at gmail.com> wrote: > >> I imagine wanting to supply multiple data paths, and want a lazy way to >> write something that just munges them together into a single list of >> available projects. Ideally. Falling back to only allowing one configurable >> directory is reasonable. I can just make it easy to deploy the demo files >> into a new workspace rather than having them included by the code directly. >> >> >> On Mon, Jan 13, 2014 at 8:48 PM, Daniel Alan Miller < >> dalan.miller at gmail.com> wrote: >> >>> Given a specified folfer hierarchy why not just use the files you >>> already have for the data, if I'm understanding correctly? >>> >>> An instance of your application can run and anything within the >>> directory path supplied when you run the application that fits the >>> specification be (Monitored? Used? Consumed?) by the application. >>> On Jan 13, 2014 8:13 PM, "Tennessee Leeuwenburg" >>> wrote: >>> >>>> Hey, >>>> >>>> A question for the peanut gallery... >>>> >>>> I'm writing a flask/bootstrap web app (not open sourced as yet) for >>>> doing some scientific processing in a pipeline data processing methodology. >>>> I want to write an example pipeline, but then have the app be deployable in >>>> user space and use either a configured directory or a dot-prefix directory >>>> for the data of that particular instance of the app. I had imagined this >>>> could be like a "layer" over the top of the core application layer, so that >>>> users could have their projects side-by-side with the core application >>>> examples. >>>> >>>> I'm now thinking maybe that's a bad idea, and it would be better just >>>> to copy the sample projects into the users workspace. >>>> >>>> In fact I think I've pretty much convinced myself given it took just >>>> one sentence to say and seems immediately clear. >>>> >>>> Are there any other paradigms in web apps for managing the application >>>> state (other than packing everything into a database)? The data here exists >>>> naturally in a fundamentally file-based paradigm, so I think it makes sense >>>> to continue that mainly. >>>> >>>> Cheers, >>>> -Tennessee >>>> >>>> -- >>>> -------------------------------------------------- >>>> Tennessee Leeuwenburg >>>> http://myownhat.blogspot.com/ >>>> "Don't believe everything you think" >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> > > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy ? the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim at growthpath.com.au Fri Jan 17 14:01:51 2014 From: tim at growthpath.com.au (Tim Richardson) Date: Sat, 18 Jan 2014 00:01:51 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: References: <52D484EE.3060508@openminddev.net> Message-ID: hi, have a look at web2py. it comes distributed as a windows installer, bundling a python distribution, a python web server (rocket) and the highly productive web2py framework. Most people move onto a source distribution and another web server but you can go a long way with the install bundle. On 16/01/2014 2:40 pm, "Tennessee Leeuwenburg" wrote: > Being a massive web app n00b, I am currently just using the builtin web > server in Flask to develop for. In terms of operational use, I have free > choice of web server, and I haven't yet tried to determine what would be > most appropriate. Advice would be appreciated! ... it will be an internal > server only, but I'd still like to Do It Right even if it's a simple setup. > > The main interest for me is to make it really easy to install. I was > considering trying to write a deploy script to simplify the process for the > user, but I'm not sure if there's a best recommended way for simplifying > deployment. I thought the application code could be installed into the > Python environment, with a deploy script to create a new workspace and > generate an appropriate web server config snippet as well as the command to > use the Flask built-in server for development and testing purposes. > > I'm probably asking some slightly odd questions since this is my first > signifiant web app and I don't have much experience with web app > architecture. > > Cheers, > -T > > > On Tue, Jan 14, 2014 at 11:29 AM, Rasjid Wilcox wrote: > >> How is you app being deployed? Is it being run behind a standard >> webserver (eg, Apache), or within a Python based WSGI web-server? If the >> latter, I would normally just pass in a command line paramater pointing >> either to a config file or perhaps directly to the project directory in >> your case. >> >> >> On 13/01/2014 8:42 PM, Tennessee Leeuwenburg wrote: >> >> Hey, >> >> A question for the peanut gallery... >> >> I'm writing a flask/bootstrap web app (not open sourced as yet) for >> doing some scientific processing in a pipeline data processing methodology. >> I want to write an example pipeline, but then have the app be deployable in >> user space and use either a configured directory or a dot-prefix directory >> for the data of that particular instance of the app. I had imagined this >> could be like a "layer" over the top of the core application layer, so that >> users could have their projects side-by-side with the core application >> examples. >> >> I'm now thinking maybe that's a bad idea, and it would be better just >> to copy the sample projects into the users workspace. >> >> In fact I think I've pretty much convinced myself given it took just >> one sentence to say and seems immediately clear. >> >> Are there any other paradigms in web apps for managing the application >> state (other than packing everything into a database)? The data here exists >> naturally in a fundamentally file-based paradigm, so I think it makes sense >> to continue that mainly. >> >> Cheers, >> -Tennessee >> >> -- >> -------------------------------------------------- >> Tennessee Leeuwenburg >> http://myownhat.blogspot.com/ >> "Don't believe everything you think" >> >> >> _______________________________________________ >> melbourne-pug mailing listmelbourne-pug at python.orghttps://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rasjid at familywilcox.net Fri Jan 17 00:57:00 2014 From: rasjid at familywilcox.net (Rasjid Wilcox) Date: Fri, 17 Jan 2014 10:57:00 +1100 Subject: [melbourne-pug] How to go about an aspect of a web app In-Reply-To: <52D788BA.1020601@dewhirst.com.au> References: <52D484EE.3060508@openminddev.net> <52D788BA.1020601@dewhirst.com.au> Message-ID: <52D871CC.9000006@familywilcox.net> On 16/01/2014 6:22 PM, Mike Dewhirst wrote: > On 16/01/2014 2:40pm, Tennessee Leeuwenburg wrote: >> Being a massive web app n00b, > > Having been there myself well within living memory I think the best > advice I can give is to judge the choice of webserver and framework by > the quality of the available user support. The most important factor > is the documentation. Running a close second is the friendliness and > competence of the existing users who answer questions on the mailing > lists. > > Based solely on that I chose Apache and Django. > That is fair enough for a 'traditional' web-application, although I personally abandoned Django since it's ORM is (still) not able to work with multi-part keys. However, with the rise of Single Page Web Applications and frameworks like AngularJS, if you are doing a SPA,I would see micro-frameworks like Flask and Bottle as being better fits. I think we need more information from Tennessee as to what style of web application it is to give better feedback. He has said however, that it is not really database backed, so I think Django would be a poor fit in this case. Cheers, Rasjid. From chrisjrn at gmail.com Mon Jan 20 00:37:03 2014 From: chrisjrn at gmail.com (Chris Neugebauer) Date: Mon, 20 Jan 2014 10:37:03 +1100 Subject: [melbourne-pug] PyCon Australia 2014 is seeking launch sponsors Message-ID: Hi There! It's definitely early days still, but we're seeking launch sponsors (those lucky companies whose name appears on the website from the moment we launch our CFP) for PyCon Australia 2014, which is being held in Brisbane, in early August. Having a broad range of sponsors is what helps us to make our conference as awesome as it is. This year, we have a special "Contributor" package for individuals and small businesses, at AU$800 (vs. ~$450 for a full "Professional" ticket), and packages with full sponsor benefits start at AU$1500. All packages come with complimentary "Professional" tickets to the conference. For full details of everything we're doing this year, and our sponsorship packages, see our prospectus: http://tinyurl.com/pycon-au-2014-prospectus ? it's designed to be printed off as a shiny colour booklet that you can give to your boss. If you're not in a position to commit to sponsorship, we're also happy to get early expressions of interest, so that we can contact you again in the next few months. If you're interested, shoot me an e-mail at sponsorship at pycon-au.org ? I'm also more than happy to help develop and put a business case if you need that. Just let me know! I look forward to hearing from you! --Chris Director of Sponsorship PyCon Australia: Brisbane 2014 P.S. Last year, I wrote up this blog post explaining what we do with our sponsorship money: http://chris.neugebauer.id.au/2012/10/03/pycon-australia-2013-needs-sponsors/ -- --Christopher Neugebauer Jabber: chrisjrn at gmail.com -- IRC: chrisjrn on irc.freenode.net -- AIM: chrisjrn157 -- MSN: chris at neugebauer.id.au -- WWW: http://chris.neugebauer.id.au -- Twitter/Identi.ca: @chrisjrn From javier at candeira.com Mon Jan 20 05:24:03 2014 From: javier at candeira.com (Javier Candeira) Date: Mon, 20 Jan 2014 15:24:03 +1100 Subject: [melbourne-pug] February session: Request for Presentations Message-ID: Hi everyone. February 3 is a Monday, two weeks from now, and we still don't have any confirmed presentations! Suggestions: maybe one of you has a talk they'd like to give, or maybe you've discovered something cool that you're using for work (or for your hobby) and can give a brief tutorial. Thanks, Javier From dcrisp at netspace.net.au Mon Jan 20 05:47:53 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Mon, 20 Jan 2014 15:47:53 +1100 (EST) Subject: [melbourne-pug] Inserting images into MSSQL using Python Message-ID: Using Python, What is the best method for reading a small PNG file from disk then writing it to a MS SQL database (2008) and then retrieiving the binary data and writing it out to disk as a valid png file. THis is for writing VERY small (700 byte) monocrhome PNG file to the database. The prefered Python MSSQL engine Im using is PYMSSQL. its the one I have used for the rest of the text so its the one I need to use for the binary data. I have fiddled with the PIL / PILLOW library I think my problem is im looking in the wrong directions! How do other people do this? Regards, David From jni.soma at gmail.com Mon Jan 20 06:03:52 2014 From: jni.soma at gmail.com (Juan Nunez-Iglesias) Date: Mon, 20 Jan 2014 16:03:52 +1100 Subject: [melbourne-pug] Inserting images into MSSQL using Python In-Reply-To: References: Message-ID: Hey David, Look at scikit-image (API documentation). You can read a png into a numpy array, which can be easily abstracted as a (shape, data) tuple. (shape is itself a tuple, containing height and width.) I don't know anything about databases, but assuming a write(db, row, col, data) function that writes binary data to the db: >>> from skimage import io >>> im = io.imread('file.png') >>> write(db, row, col, im.data) >>> write(db, row, 'png-width', im.shape[0]) >>> write(db, row, 'png-height', im.shape[1]) Then, if you want to get the png back out again (and again assuming a read(db, ...) function): >>> import numpy as np >>> data, width, height = read(db, row, col), read(db, row, 'png-width'), read(db, row, 'png-height') >>> im = np.array(data, dtype=np.uint8).reshape((width, height)) >>> io.imsave('file-out.png', im) Note that your image may be 16-bit grayscale, in which case you'll need to use dtype=np.uint16. Hope that helps and that I'm not being too naive about the db procedures... Juan. On Mon, Jan 20, 2014 at 3:47 PM, David Crisp wrote: > Using Python, What is the best method for reading a small PNG file from > disk then writing it to a MS SQL database (2008) and then retrieiving the > binary data and writing it out to disk as a valid png file. > > THis is for writing VERY small (700 byte) monocrhome PNG file to the > database. > > The prefered Python MSSQL engine Im using is PYMSSQL. its the one I have > used for the rest of the text so its the one I need to use for the binary > data. > > I have fiddled with the PIL / PILLOW library > > I think my problem is im looking in the wrong directions! > > How do other people do this? > Regards, > David > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -------------- next part -------------- An HTML attachment was scrubbed... URL: From hartror at gmail.com Mon Jan 20 06:06:37 2014 From: hartror at gmail.com (Rory Hart) Date: Mon, 20 Jan 2014 16:06:37 +1100 Subject: [melbourne-pug] February session: Request for Presentations In-Reply-To: References: Message-ID: I have a travelling salesman solver I wrote for my own amusement using numpy and matplotlib. The python is nothing exciting right now but the algorithm is interesting and the visualisation is nice. A demo/tutorial on the algo and code would be suitable for either a 5 minute or 15 minute talk. On 20 January 2014 15:24, Javier Candeira wrote: > Hi everyone. February 3 is a Monday, two weeks from now, and we still > don't have any confirmed presentations! > > Suggestions: maybe one of you has a talk they'd like to give, or maybe > you've discovered something cool that you're using for work (or for > your hobby) and can give a brief tutorial. > > Thanks, > > Javier > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave at hopest.net Mon Jan 20 06:22:30 2014 From: dave at hopest.net (Dave Collins) Date: Mon, 20 Jan 2014 16:22:30 +1100 Subject: [melbourne-pug] Inserting images into MSSQL using Python In-Reply-To: References: Message-ID: <1390195350.2521.4.camel@gfedev21.bom.gov.au> David, What data type are using using in the database? You should not need PIL to read or write data in from disk and put into a database. dave On Mon, 2014-01-20 at 15:47 +1100, David Crisp wrote: > Using Python, What is the best method for reading a small PNG file from > disk then writing it to a MS SQL database (2008) and then retrieiving > the binary data and writing it out to disk as a valid png file. > > THis is for writing VERY small (700 byte) monocrhome PNG file to the > database. > > The prefered Python MSSQL engine Im using is PYMSSQL. its the one I have > used for the rest of the text so its the one I need to use for the binary > data. > > I have fiddled with the PIL / PILLOW library > > I think my problem is im looking in the wrong directions! > > How do other people do this? > Regards, > David > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug From dcrisp at netspace.net.au Mon Jan 20 06:44:00 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Mon, 20 Jan 2014 16:44:00 +1100 (EST) Subject: [melbourne-pug] Inserting images into MSSQL using Python In-Reply-To: <1390195350.2521.4.camel@gfedev21.bom.gov.au> References: <1390195350.2521.4.camel@gfedev21.bom.gov.au> Message-ID: Dave, Pil was just an example of the tools i had been playing with at the time I was trying to work out the DB insertts. On Mon, 20 Jan 2014, Dave Collins wrote: > David, > What data type are using using in the database? > > You should not need PIL to read or write data in from disk and put into > a database. > > dave > > > On Mon, 2014-01-20 at 15:47 +1100, David Crisp wrote: >> Using Python, What is the best method for reading a small PNG file from >> disk then writing it to a MS SQL database (2008) and then retrieiving >> the binary data and writing it out to disk as a valid png file. >> >> THis is for writing VERY small (700 byte) monocrhome PNG file to the >> database. >> >> The prefered Python MSSQL engine Im using is PYMSSQL. its the one I have >> used for the rest of the text so its the one I need to use for the binary >> data. >> >> I have fiddled with the PIL / PILLOW library >> >> I think my problem is im looking in the wrong directions! >> >> How do other people do this? >> Regards, >> David >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From javier at candeira.com Mon Jan 20 07:13:02 2014 From: javier at candeira.com (Javier Candeira) Date: Mon, 20 Jan 2014 17:13:02 +1100 Subject: [melbourne-pug] February session: Request for Presentations In-Reply-To: References: Message-ID: Hi, Rory. Thanks, that sounds great. Can you please write yourself up on the wiki? http://wiki.python.org/moin/MelbournePUG J On Mon, Jan 20, 2014 at 4:06 PM, Rory Hart wrote: > I have a travelling salesman solver I wrote for my own amusement using numpy > and matplotlib. The python is nothing exciting right now but the algorithm > is interesting and the visualisation is nice. > > A demo/tutorial on the algo and code would be suitable for either a 5 minute > or 15 minute talk. > > > On 20 January 2014 15:24, Javier Candeira wrote: >> >> Hi everyone. February 3 is a Monday, two weeks from now, and we still >> don't have any confirmed presentations! >> >> Suggestions: maybe one of you has a talk they'd like to give, or maybe >> you've discovered something cool that you're using for work (or for >> your hobby) and can give a brief tutorial. >> >> Thanks, >> >> Javier >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug > > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From javier at candeira.com Mon Jan 27 21:51:57 2014 From: javier at candeira.com (Javier Candeira) Date: Tue, 28 Jan 2014 07:51:57 +1100 Subject: [melbourne-pug] February MPUG Meeting: Python-Future, Metahuristics. Monday 3 February, 6PM, Inspire 9, 41 Stewart St Richmond Message-ID: Dear Melbourne Pythonistas, A week from now, Monday 3, we'll hold the February meeting of the Melbourne Python Users Group. Time: 6pm Venue: Inspire 9, 41 Stewart St. Richmond. 50m from Richmond Train Station. Program: * Ed Schofield -- Update on Python-Future for Python 2/3 compatibility * Rory Hart -- Metaheuristics and Python As usual, we'll order pizza, with a $10 contribution required. Drinks are BYO. If you have a tip to share, or want to give a short presentation on a library you've been using lately, please just come forward at the start of the meeting. With much appreciation to Inspire 9 for the donation of the use of the venue, The MPUG organisers From noonslists at gmail.com Thu Jan 30 01:56:48 2014 From: noonslists at gmail.com (Noon Silk) Date: Thu, 30 Jan 2014 11:56:48 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? Message-ID: Hello, So I'm interested in a python-based wiki that I can write arbitrary python code in; perhaps with a view to: 1) Creating specific templates, 2) Arbitrarily querying the list of pages, 3) Obtaining specific "bits" of pages (Perhaps I mark a section in the template as "json", then I'd want to grab the json from pages A, B, X, Y Anyone know of something out there that does this? At the moment all I can think of is MoinMoin [1]. [1] http://moinmo.in/MoinMoinWiki -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy -- the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: From miked at dewhirst.com.au Thu Jan 30 02:17:25 2014 From: miked at dewhirst.com.au (Mike Dewhirst) Date: Thu, 30 Jan 2014 12:17:25 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: Message-ID: <52E9A825.7060400@dewhirst.com.au> On 30/01/2014 11:56am, Noon Silk wrote: > Hello, > > So I'm interested in a python-based wiki that I can write arbitrary > python code in; perhaps with a view to: > 1) Creating specific templates, > 2) Arbitrarily querying the list of pages, > 3) Obtaining specific "bits" of pages (Perhaps I mark a section in > the template as "json", then I'd want to grab the json from pages A, B, X, Y > > Anyone know of something out there that does this? There is Django snippets ... https://djangosnippets.org and Pastebin ... http://pastebin.com/ Also, have you looked at the Trac wiki? Most people would use it for the ticketing but it also has useful wiki with markup permitting code. Mike At the moment all > I can think of is MoinMoin [1]. > > [1] http://moinmo.in/MoinMoinWiki > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy ? the joy > of being this signature." > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From noonslists at gmail.com Thu Jan 30 03:36:07 2014 From: noonslists at gmail.com (Noon Silk) Date: Thu, 30 Jan 2014 13:36:07 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: <52E9A825.7060400@dewhirst.com.au> References: <52E9A825.7060400@dewhirst.com.au> Message-ID: > There is Django snippets ... https://djangosnippets.org > and Pastebin ... http://pastebin.com/ ..., these are both websites. I'm looking for something to customise myself. > Also, have you looked at the Trac wiki? Most people would use it for > the ticketing but it also has useful wiki with markup permitting code. I hadn't considered Trac for this, thanks for reminding me about it. I'm not sure it's right, though. On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst wrote: > On 30/01/2014 11:56am, Noon Silk wrote: > >> Hello, >> >> So I'm interested in a python-based wiki that I can write arbitrary >> python code in; perhaps with a view to: >> 1) Creating specific templates, >> 2) Arbitrarily querying the list of pages, >> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >> the template as "json", then I'd want to grab the json from pages A, B, >> X, Y >> >> Anyone know of something out there that does this? >> > > There is Django snippets ... https://djangosnippets.org > and Pastebin ... http://pastebin.com/ > > Also, have you looked at the Trac wiki? Most people would use it for the > ticketing but it also has useful wiki with markup permitting code. > > Mike > > At the moment all > >> I can think of is MoinMoin [1]. >> >> [1] http://moinmo.in/MoinMoinWiki >> -- >> Noon Silk >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> of being this signature." >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy -- the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: From anthony.briggs at gmail.com Thu Jan 30 04:23:23 2014 From: anthony.briggs at gmail.com (Anthony Briggs) Date: Thu, 30 Jan 2014 14:23:23 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: Trac is pretty painful to set up, from memory. It might help if you gave us some more detail about what you're trying to do, rather than a list of features. eg. The iPython notebook will let you execute arbitrary code, but I don't know whether it can introspect and pull bits of other pages in the same notebook. Failling that, it might be relatively easy to roll your own, either with Django or some combination of Flask/Peewee/Jinja/similar. Anthony On 30 January 2014 13:36, Noon Silk wrote: > > There is Django snippets ... https://djangosnippets.org > > and Pastebin ... http://pastebin.com/ > > ..., these are both websites. I'm looking for something to customise > myself. > > > > Also, have you looked at the Trac wiki? Most people would use it for > > the ticketing but it also has useful wiki with markup permitting code. > > I hadn't considered Trac for this, thanks for reminding me about it. I'm > not sure it's right, though. > > > > On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst wrote: > >> On 30/01/2014 11:56am, Noon Silk wrote: >> >>> Hello, >>> >>> So I'm interested in a python-based wiki that I can write arbitrary >>> python code in; perhaps with a view to: >>> 1) Creating specific templates, >>> 2) Arbitrarily querying the list of pages, >>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >>> the template as "json", then I'd want to grab the json from pages A, B, >>> X, Y >>> >>> Anyone know of something out there that does this? >>> >> >> There is Django snippets ... https://djangosnippets.org >> and Pastebin ... http://pastebin.com/ >> >> Also, have you looked at the Trac wiki? Most people would use it for the >> ticketing but it also has useful wiki with markup permitting code. >> >> Mike >> >> At the moment all >> >>> I can think of is MoinMoin [1]. >>> >>> [1] http://moinmo.in/MoinMoinWiki >>> -- >>> Noon Silk >>> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>> >>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>> of being this signature." >>> >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy -- the joy > of being this signature." > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From noonslists at gmail.com Thu Jan 30 04:53:20 2014 From: noonslists at gmail.com (Noon Silk) Date: Thu, 30 Jan 2014 14:53:20 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: > It might help if you gave us some more detail about what you're trying to > do, rather than a list of features. eg. The iPython notebook will let you > execute arbitrary code, but I don't know whether it can introspect and > pull bits of other pages in the same notebook. I want a Wiki - community editable, versionable, trivial setup, with some customisability to query the pages that the wiki has, and obtain bits of the pages - say I create a template page and it always contains sections "Description, Example, Json" and then I want to obtain each "Example" from each "page" that I have queried and do things with it; like perhaps create a graph. Something very similar to FindStat.org, really - http://www.findstat.org/(which uses MoinMoin). Note that while this looks like it makes a lot of use of MoinMoin, infact almost all the work is done through MoinMoin "macros", written in Python. I want to re-use as much of the wiki as possible. On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs wrote: > Trac is pretty painful to set up, from memory. > > It might help if you gave us some more detail about what you're trying to > do, rather than a list of features. eg. The iPython notebook will let you > execute arbitrary code, but I don't know whether it can introspect and pull > bits of other pages in the same notebook. > > Failling that, it might be relatively easy to roll your own, either with > Django or some combination of Flask/Peewee/Jinja/similar. > > Anthony > > > > On 30 January 2014 13:36, Noon Silk wrote: > >> > There is Django snippets ... https://djangosnippets.org >> > and Pastebin ... http://pastebin.com/ >> >> ..., these are both websites. I'm looking for something to customise >> myself. >> >> >> > Also, have you looked at the Trac wiki? Most people would use it for >> > the ticketing but it also has useful wiki with markup permitting code. >> >> I hadn't considered Trac for this, thanks for reminding me about it. I'm >> not sure it's right, though. >> >> >> >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst wrote: >> >>> On 30/01/2014 11:56am, Noon Silk wrote: >>> >>>> Hello, >>>> >>>> So I'm interested in a python-based wiki that I can write arbitrary >>>> python code in; perhaps with a view to: >>>> 1) Creating specific templates, >>>> 2) Arbitrarily querying the list of pages, >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >>>> the template as "json", then I'd want to grab the json from pages A, B, >>>> X, Y >>>> >>>> Anyone know of something out there that does this? >>>> >>> >>> There is Django snippets ... https://djangosnippets.org >>> and Pastebin ... http://pastebin.com/ >>> >>> Also, have you looked at the Trac wiki? Most people would use it for the >>> ticketing but it also has useful wiki with markup permitting code. >>> >>> Mike >>> >>> At the moment all >>> >>>> I can think of is MoinMoin [1]. >>>> >>>> [1] http://moinmo.in/MoinMoinWiki >>>> -- >>>> Noon Silk >>>> >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>> >>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>> of being this signature." >>>> >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >> >> >> >> -- >> Noon Silk >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> of being this signature." >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy -- the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: From anthony.briggs at gmail.com Thu Jan 30 05:11:37 2014 From: anthony.briggs at gmail.com (Anthony Briggs) Date: Thu, 30 Jan 2014 15:11:37 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: I don't know of anything like that off of the top of my head, but from a quick search there are a few lightweight wikis around which might be possible to hack on, eg. https://pypi.python.org/pypi/djiki and https://pypi.python.org/pypi/valet. Perhaps they might get you further than MoinMoin? On 30 January 2014 14:53, Noon Silk wrote: > > It might help if you gave us some more detail about what you're trying > to > > do, rather than a list of features. eg. The iPython notebook will let > you > > execute arbitrary code, but I don't know whether it can introspect and > > pull bits of other pages in the same notebook. > > I want a Wiki - community editable, versionable, trivial setup, with some > customisability to query the pages that the wiki has, and obtain bits of > the pages - say I create a template page and it always contains sections > "Description, Example, Json" and then I want to obtain each "Example" from > each "page" that I have queried and do things with it; like perhaps create > a graph. > > Something very similar to FindStat.org, really - http://www.findstat.org/(which uses MoinMoin). Note that while this looks like it makes a lot of > use of MoinMoin, infact almost all the work is done through MoinMoin > "macros", written in Python. I want to re-use as much of the wiki as > possible. > > > > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs wrote: > >> Trac is pretty painful to set up, from memory. >> >> It might help if you gave us some more detail about what you're trying to >> do, rather than a list of features. eg. The iPython notebook will let you >> execute arbitrary code, but I don't know whether it can introspect and pull >> bits of other pages in the same notebook. >> >> Failling that, it might be relatively easy to roll your own, either with >> Django or some combination of Flask/Peewee/Jinja/similar. >> >> Anthony >> >> >> >> On 30 January 2014 13:36, Noon Silk wrote: >> >>> > There is Django snippets ... https://djangosnippets.org >>> > and Pastebin ... http://pastebin.com/ >>> >>> ..., these are both websites. I'm looking for something to customise >>> myself. >>> >>> >>> > Also, have you looked at the Trac wiki? Most people would use it for >>> > the ticketing but it also has useful wiki with markup permitting code. >>> >>> I hadn't considered Trac for this, thanks for reminding me about it. I'm >>> not sure it's right, though. >>> >>> >>> >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst wrote: >>> >>>> On 30/01/2014 11:56am, Noon Silk wrote: >>>> >>>>> Hello, >>>>> >>>>> So I'm interested in a python-based wiki that I can write arbitrary >>>>> python code in; perhaps with a view to: >>>>> 1) Creating specific templates, >>>>> 2) Arbitrarily querying the list of pages, >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >>>>> the template as "json", then I'd want to grab the json from pages A, >>>>> B, X, Y >>>>> >>>>> Anyone know of something out there that does this? >>>>> >>>> >>>> There is Django snippets ... https://djangosnippets.org >>>> and Pastebin ... http://pastebin.com/ >>>> >>>> Also, have you looked at the Trac wiki? Most people would use it for >>>> the ticketing but it also has useful wiki with markup permitting code. >>>> >>>> Mike >>>> >>>> At the moment all >>>> >>>>> I can think of is MoinMoin [1]. >>>>> >>>>> [1] http://moinmo.in/MoinMoinWiki >>>>> -- >>>>> Noon Silk >>>>> >>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>> >>>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>>> of being this signature." >>>>> >>>>> >>>>> _______________________________________________ >>>>> melbourne-pug mailing list >>>>> melbourne-pug at python.org >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>> >>>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>> >>> >>> >>> -- >>> Noon Silk >>> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>> >>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>> of being this signature." >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy -- the joy > of being this signature." > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim at growthpath.com.au Thu Jan 30 05:32:08 2014 From: tim at growthpath.com.au (Tim Richardson) Date: Thu, 30 Jan 2014 15:32:08 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: web2py has a built-in wiki. Have a look at the docs and see if it's interesting. On Thu, Jan 30, 2014 at 3:11 PM, Anthony Briggs wrote: > I don't know of anything like that off of the top of my head, but from a > quick search there are a few lightweight wikis around which might be > possible to hack on, eg. https://pypi.python.org/pypi/djiki and > https://pypi.python.org/pypi/valet. Perhaps they might get you further > than MoinMoin? > > > On 30 January 2014 14:53, Noon Silk wrote: > >> > It might help if you gave us some more detail about what you're trying >> to >> > do, rather than a list of features. eg. The iPython notebook will let >> you >> > execute arbitrary code, but I don't know whether it can introspect and >> > pull bits of other pages in the same notebook. >> >> I want a Wiki - community editable, versionable, trivial setup, with some >> customisability to query the pages that the wiki has, and obtain bits of >> the pages - say I create a template page and it always contains sections >> "Description, Example, Json" and then I want to obtain each "Example" from >> each "page" that I have queried and do things with it; like perhaps create >> a graph. >> >> Something very similar to FindStat.org, really - http://www.findstat.org/(which uses MoinMoin). Note that while this looks like it makes a lot of >> use of MoinMoin, infact almost all the work is done through MoinMoin >> "macros", written in Python. I want to re-use as much of the wiki as >> possible. >> >> >> >> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs > > wrote: >> >>> Trac is pretty painful to set up, from memory. >>> >>> It might help if you gave us some more detail about what you're trying >>> to do, rather than a list of features. eg. The iPython notebook will let >>> you execute arbitrary code, but I don't know whether it can introspect and >>> pull bits of other pages in the same notebook. >>> >>> Failling that, it might be relatively easy to roll your own, either with >>> Django or some combination of Flask/Peewee/Jinja/similar. >>> >>> Anthony >>> >>> >>> >>> On 30 January 2014 13:36, Noon Silk wrote: >>> >>>> > There is Django snippets ... https://djangosnippets.org >>>> > and Pastebin ... http://pastebin.com/ >>>> >>>> ..., these are both websites. I'm looking for something to customise >>>> myself. >>>> >>>> >>>> > Also, have you looked at the Trac wiki? Most people would use it for >>>> > the ticketing but it also has useful wiki with markup permitting code. >>>> >>>> I hadn't considered Trac for this, thanks for reminding me about it. >>>> I'm not sure it's right, though. >>>> >>>> >>>> >>>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst wrote: >>>> >>>>> On 30/01/2014 11:56am, Noon Silk wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> So I'm interested in a python-based wiki that I can write arbitrary >>>>>> python code in; perhaps with a view to: >>>>>> 1) Creating specific templates, >>>>>> 2) Arbitrarily querying the list of pages, >>>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >>>>>> the template as "json", then I'd want to grab the json from pages A, >>>>>> B, X, Y >>>>>> >>>>>> Anyone know of something out there that does this? >>>>>> >>>>> >>>>> There is Django snippets ... https://djangosnippets.org >>>>> and Pastebin ... http://pastebin.com/ >>>>> >>>>> Also, have you looked at the Trac wiki? Most people would use it for >>>>> the ticketing but it also has useful wiki with markup permitting code. >>>>> >>>>> Mike >>>>> >>>>> At the moment all >>>>> >>>>>> I can think of is MoinMoin [1]. >>>>>> >>>>>> [1] http://moinmo.in/MoinMoinWiki >>>>>> -- >>>>>> Noon Silk >>>>>> >>>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>>> >>>>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>>>> of being this signature." >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> melbourne-pug mailing list >>>>>> melbourne-pug at python.org >>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> melbourne-pug mailing list >>>>> melbourne-pug at python.org >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>> >>>> >>>> >>>> >>>> -- >>>> Noon Silk >>>> >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>> >>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>> of being this signature." >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> >> -- >> Noon Silk >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> of being this signature." >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- *Tim Richardson, Director* GrowthPath, Data-driven profit growth Mobile: +61 423 091 732 Office: +61 3 8678 1850 I tweet useful business & IT tips at growthpath_au GrowthPath Pty Ltd ABN 76 133 733 963 -------------- next part -------------- An HTML attachment was scrubbed... URL: From kiran.busi at gmail.com Thu Jan 30 05:35:04 2014 From: kiran.busi at gmail.com (Kiran Busi) Date: Thu, 30 Jan 2014 15:35:04 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 19 In-Reply-To: References: Message-ID: +1 to MoinMoin. I use it myself as a personal wiki. >From a hack-ability perspective, it is straightforward to hack and create your macros. Templates and Access Control Lists come out of the box. On Thu, Jan 30, 2014 at 3:11 PM, wrote: > Send melbourne-pug mailing list submissions to > melbourne-pug at python.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://mail.python.org/mailman/listinfo/melbourne-pug > or, via email, send a message with subject or body 'help' to > melbourne-pug-request at python.org > > You can reach the person managing the list at > melbourne-pug-owner at python.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of melbourne-pug digest..." > > > Today's Topics: > > 1. Re: python-based wiki with nice query-/template-ability? > (Noon Silk) > 2. Re: python-based wiki with nice query-/template-ability? > (Anthony Briggs) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 30 Jan 2014 14:53:20 +1100 > From: Noon Silk > To: Melbourne Python Users Group > Subject: Re: [melbourne-pug] python-based wiki with nice > query-/template-ability? > Message-ID: > < > CADt_azb8M9eBdeoq2L8UuWHvNj8hcxaaE+4tKGe+RaDXTQsi6w at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > It might help if you gave us some more detail about what you're trying to > > do, rather than a list of features. eg. The iPython notebook will let you > > execute arbitrary code, but I don't know whether it can introspect and > > pull bits of other pages in the same notebook. > > I want a Wiki - community editable, versionable, trivial setup, with some > customisability to query the pages that the wiki has, and obtain bits of > the pages - say I create a template page and it always contains sections > "Description, Example, Json" and then I want to obtain each "Example" from > each "page" that I have queried and do things with it; like perhaps create > a graph. > > Something very similar to FindStat.org, really - > http://www.findstat.org/(which uses MoinMoin). Note that while this > looks like it makes a lot of > use of MoinMoin, infact almost all the work is done through MoinMoin > "macros", written in Python. I want to re-use as much of the wiki as > possible. > > > > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs >wrote: > > > Trac is pretty painful to set up, from memory. > > > > It might help if you gave us some more detail about what you're trying to > > do, rather than a list of features. eg. The iPython notebook will let you > > execute arbitrary code, but I don't know whether it can introspect and > pull > > bits of other pages in the same notebook. > > > > Failling that, it might be relatively easy to roll your own, either with > > Django or some combination of Flask/Peewee/Jinja/similar. > > > > Anthony > > > > > > > > On 30 January 2014 13:36, Noon Silk wrote: > > > >> > There is Django snippets ... https://djangosnippets.org > >> > and Pastebin ... http://pastebin.com/ > >> > >> ..., these are both websites. I'm looking for something to customise > >> myself. > >> > >> > >> > Also, have you looked at the Trac wiki? Most people would use it for > >> > the ticketing but it also has useful wiki with markup permitting code. > >> > >> I hadn't considered Trac for this, thanks for reminding me about it. I'm > >> not sure it's right, though. > >> > >> > >> > >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst >wrote: > >> > >>> On 30/01/2014 11:56am, Noon Silk wrote: > >>> > >>>> Hello, > >>>> > >>>> So I'm interested in a python-based wiki that I can write arbitrary > >>>> python code in; perhaps with a view to: > >>>> 1) Creating specific templates, > >>>> 2) Arbitrarily querying the list of pages, > >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in > >>>> the template as "json", then I'd want to grab the json from pages A, > B, > >>>> X, Y > >>>> > >>>> Anyone know of something out there that does this? > >>>> > >>> > >>> There is Django snippets ... https://djangosnippets.org > >>> and Pastebin ... http://pastebin.com/ > >>> > >>> Also, have you looked at the Trac wiki? Most people would use it for > the > >>> ticketing but it also has useful wiki with markup permitting code. > >>> > >>> Mike > >>> > >>> At the moment all > >>> > >>>> I can think of is MoinMoin [1]. > >>>> > >>>> [1] http://moinmo.in/MoinMoinWiki > >>>> -- > >>>> Noon Silk > >>>> > >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >>>> > >>>> "Every morning when I wake up, I experience an exquisite joy -- the > joy > >>>> of being this signature." > >>>> > >>>> > >>>> _______________________________________________ > >>>> melbourne-pug mailing list > >>>> melbourne-pug at python.org > >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >> > >> > >> > >> -- > >> Noon Silk > >> > >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> > >> "Every morning when I wake up, I experience an exquisite joy -- the joy > >> of being this signature." > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy -- the joy > of being this signature." > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/619b8947/attachment-0001.html > > > > ------------------------------ > > Message: 2 > Date: Thu, 30 Jan 2014 15:11:37 +1100 > From: Anthony Briggs > To: Melbourne Python Users Group > Subject: Re: [melbourne-pug] python-based wiki with nice > query-/template-ability? > Message-ID: > < > CAO4-38_ea+ass4aeochGy6UgogXN70g5L5YBwrGoWCuw+yhLHQ at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I don't know of anything like that off of the top of my head, but from a > quick search there are a few lightweight wikis around which might be > possible to hack on, eg. https://pypi.python.org/pypi/djiki and > https://pypi.python.org/pypi/valet. Perhaps they might get you further > than > MoinMoin? > > > On 30 January 2014 14:53, Noon Silk wrote: > > > > It might help if you gave us some more detail about what you're trying > > to > > > do, rather than a list of features. eg. The iPython notebook will let > > you > > > execute arbitrary code, but I don't know whether it can introspect and > > > pull bits of other pages in the same notebook. > > > > I want a Wiki - community editable, versionable, trivial setup, with some > > customisability to query the pages that the wiki has, and obtain bits of > > the pages - say I create a template page and it always contains sections > > "Description, Example, Json" and then I want to obtain each "Example" > from > > each "page" that I have queried and do things with it; like perhaps > create > > a graph. > > > > Something very similar to FindStat.org, really - > http://www.findstat.org/(which uses MoinMoin). Note that while this looks > like it makes a lot of > > use of MoinMoin, infact almost all the work is done through MoinMoin > > "macros", written in Python. I want to re-use as much of the wiki as > > possible. > > > > > > > > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < > anthony.briggs at gmail.com>wrote: > > > >> Trac is pretty painful to set up, from memory. > >> > >> It might help if you gave us some more detail about what you're trying > to > >> do, rather than a list of features. eg. The iPython notebook will let > you > >> execute arbitrary code, but I don't know whether it can introspect and > pull > >> bits of other pages in the same notebook. > >> > >> Failling that, it might be relatively easy to roll your own, either with > >> Django or some combination of Flask/Peewee/Jinja/similar. > >> > >> Anthony > >> > >> > >> > >> On 30 January 2014 13:36, Noon Silk wrote: > >> > >>> > There is Django snippets ... https://djangosnippets.org > >>> > and Pastebin ... http://pastebin.com/ > >>> > >>> ..., these are both websites. I'm looking for something to customise > >>> myself. > >>> > >>> > >>> > Also, have you looked at the Trac wiki? Most people would use it for > >>> > the ticketing but it also has useful wiki with markup permitting > code. > >>> > >>> I hadn't considered Trac for this, thanks for reminding me about it. > I'm > >>> not sure it's right, though. > >>> > >>> > >>> > >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst >wrote: > >>> > >>>> On 30/01/2014 11:56am, Noon Silk wrote: > >>>> > >>>>> Hello, > >>>>> > >>>>> So I'm interested in a python-based wiki that I can write > arbitrary > >>>>> python code in; perhaps with a view to: > >>>>> 1) Creating specific templates, > >>>>> 2) Arbitrarily querying the list of pages, > >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in > >>>>> the template as "json", then I'd want to grab the json from pages A, > >>>>> B, X, Y > >>>>> > >>>>> Anyone know of something out there that does this? > >>>>> > >>>> > >>>> There is Django snippets ... https://djangosnippets.org > >>>> and Pastebin ... http://pastebin.com/ > >>>> > >>>> Also, have you looked at the Trac wiki? Most people would use it for > >>>> the ticketing but it also has useful wiki with markup permitting code. > >>>> > >>>> Mike > >>>> > >>>> At the moment all > >>>> > >>>>> I can think of is MoinMoin [1]. > >>>>> > >>>>> [1] http://moinmo.in/MoinMoinWiki > >>>>> -- > >>>>> Noon Silk > >>>>> > >>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >>>>> > >>>>> "Every morning when I wake up, I experience an exquisite joy -- the > joy > >>>>> of being this signature." > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> melbourne-pug mailing list > >>>>> melbourne-pug at python.org > >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>>> > >>>>> > >>>> _______________________________________________ > >>>> melbourne-pug mailing list > >>>> melbourne-pug at python.org > >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>> > >>> > >>> > >>> -- > >>> Noon Silk > >>> > >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >>> > >>> "Every morning when I wake up, I experience an exquisite joy -- the joy > >>> of being this signature." > >>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >>> > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > > > > > > -- > > Noon Silk > > > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > > > "Every morning when I wake up, I experience an exquisite joy -- the joy > > of being this signature." > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a667f201/attachment.html > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > ------------------------------ > > End of melbourne-pug Digest, Vol 91, Issue 19 > ********************************************* > -------------- next part -------------- An HTML attachment was scrubbed... URL: From noonslists at gmail.com Thu Jan 30 06:26:45 2014 From: noonslists at gmail.com (Noon Silk) Date: Thu, 30 Jan 2014 16:26:45 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 19 In-Reply-To: References: Message-ID: > +1 to MoinMoin. > I use it myself as a personal wiki. > From a hack-ability perspective, it is straightforward to hack and create your macros. > Templates and Access Control Lists come out of the box. Cheers yeah, I also found it really easy to do that. I was concerned it didn't have a way to query it's list of pages though; but indeed it does. I've not tried it out, but it at least looks acceptable (i.e. not as bad as walking the filesystem to find them all). I'm just not sure how well it would support looking easily for particular bits of the pages; but maybe I can store it as metadata somehow; I don't know, but at least is looking a bit promising. On Thu, Jan 30, 2014 at 3:35 PM, Kiran Busi wrote: > +1 to MoinMoin. > I use it myself as a personal wiki. > From a hack-ability perspective, it is straightforward to hack and create > your macros. > Templates and Access Control Lists come out of the box. > > > > > On Thu, Jan 30, 2014 at 3:11 PM, wrote: > >> Send melbourne-pug mailing list submissions to >> melbourne-pug at python.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> https://mail.python.org/mailman/listinfo/melbourne-pug >> or, via email, send a message with subject or body 'help' to >> melbourne-pug-request at python.org >> >> You can reach the person managing the list at >> melbourne-pug-owner at python.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of melbourne-pug digest..." >> >> >> Today's Topics: >> >> 1. Re: python-based wiki with nice query-/template-ability? >> (Noon Silk) >> 2. Re: python-based wiki with nice query-/template-ability? >> (Anthony Briggs) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Thu, 30 Jan 2014 14:53:20 +1100 >> From: Noon Silk >> To: Melbourne Python Users Group >> Subject: Re: [melbourne-pug] python-based wiki with nice >> query-/template-ability? >> Message-ID: >> < >> CADt_azb8M9eBdeoq2L8UuWHvNj8hcxaaE+4tKGe+RaDXTQsi6w at mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> > It might help if you gave us some more detail about what you're trying >> to >> > do, rather than a list of features. eg. The iPython notebook will let >> you >> > execute arbitrary code, but I don't know whether it can introspect and >> > pull bits of other pages in the same notebook. >> >> I want a Wiki - community editable, versionable, trivial setup, with some >> customisability to query the pages that the wiki has, and obtain bits of >> the pages - say I create a template page and it always contains sections >> "Description, Example, Json" and then I want to obtain each "Example" from >> each "page" that I have queried and do things with it; like perhaps create >> a graph. >> >> Something very similar to FindStat.org, really - >> http://www.findstat.org/(which uses MoinMoin). Note that while this >> looks like it makes a lot of >> use of MoinMoin, infact almost all the work is done through MoinMoin >> "macros", written in Python. I want to re-use as much of the wiki as >> possible. >> >> >> >> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs > >wrote: >> >> > Trac is pretty painful to set up, from memory. >> > >> > It might help if you gave us some more detail about what you're trying >> to >> > do, rather than a list of features. eg. The iPython notebook will let >> you >> > execute arbitrary code, but I don't know whether it can introspect and >> pull >> > bits of other pages in the same notebook. >> > >> > Failling that, it might be relatively easy to roll your own, either with >> > Django or some combination of Flask/Peewee/Jinja/similar. >> > >> > Anthony >> > >> > >> > >> > On 30 January 2014 13:36, Noon Silk wrote: >> > >> >> > There is Django snippets ... https://djangosnippets.org >> >> > and Pastebin ... http://pastebin.com/ >> >> >> >> ..., these are both websites. I'm looking for something to customise >> >> myself. >> >> >> >> >> >> > Also, have you looked at the Trac wiki? Most people would use it for >> >> > the ticketing but it also has useful wiki with markup permitting >> code. >> >> >> >> I hadn't considered Trac for this, thanks for reminding me about it. >> I'm >> >> not sure it's right, though. >> >> >> >> >> >> >> >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst > >wrote: >> >> >> >>> On 30/01/2014 11:56am, Noon Silk wrote: >> >>> >> >>>> Hello, >> >>>> >> >>>> So I'm interested in a python-based wiki that I can write >> arbitrary >> >>>> python code in; perhaps with a view to: >> >>>> 1) Creating specific templates, >> >>>> 2) Arbitrarily querying the list of pages, >> >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >> >>>> the template as "json", then I'd want to grab the json from pages A, >> B, >> >>>> X, Y >> >>>> >> >>>> Anyone know of something out there that does this? >> >>>> >> >>> >> >>> There is Django snippets ... https://djangosnippets.org >> >>> and Pastebin ... http://pastebin.com/ >> >>> >> >>> Also, have you looked at the Trac wiki? Most people would use it for >> the >> >>> ticketing but it also has useful wiki with markup permitting code. >> >>> >> >>> Mike >> >>> >> >>> At the moment all >> >>> >> >>>> I can think of is MoinMoin [1]. >> >>>> >> >>>> [1] http://moinmo.in/MoinMoinWiki >> >>>> -- >> >>>> Noon Silk >> >>>> >> >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >>>> >> >>>> "Every morning when I wake up, I experience an exquisite joy -- the >> joy >> >>>> of being this signature." >> >>>> >> >>>> >> >>>> _______________________________________________ >> >>>> melbourne-pug mailing list >> >>>> melbourne-pug at python.org >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >>>> >> >>>> >> >>> _______________________________________________ >> >>> melbourne-pug mailing list >> >>> melbourne-pug at python.org >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >>> >> >> >> >> >> >> >> >> -- >> >> Noon Silk >> >> >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> >> of being this signature." >> >> >> >> _______________________________________________ >> >> melbourne-pug mailing list >> >> melbourne-pug at python.org >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > >> >> >> -- >> Noon Silk >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> of being this signature." >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: < >> http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/619b8947/attachment-0001.html >> > >> >> ------------------------------ >> >> Message: 2 >> Date: Thu, 30 Jan 2014 15:11:37 +1100 >> From: Anthony Briggs >> To: Melbourne Python Users Group >> Subject: Re: [melbourne-pug] python-based wiki with nice >> query-/template-ability? >> Message-ID: >> < >> CAO4-38_ea+ass4aeochGy6UgogXN70g5L5YBwrGoWCuw+yhLHQ at mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> I don't know of anything like that off of the top of my head, but from a >> quick search there are a few lightweight wikis around which might be >> possible to hack on, eg. https://pypi.python.org/pypi/djiki and >> https://pypi.python.org/pypi/valet. Perhaps they might get you further >> than >> MoinMoin? >> >> >> On 30 January 2014 14:53, Noon Silk wrote: >> >> > > It might help if you gave us some more detail about what you're trying >> > to >> > > do, rather than a list of features. eg. The iPython notebook will let >> > you >> > > execute arbitrary code, but I don't know whether it can introspect and >> > > pull bits of other pages in the same notebook. >> > >> > I want a Wiki - community editable, versionable, trivial setup, with >> some >> > customisability to query the pages that the wiki has, and obtain bits of >> > the pages - say I create a template page and it always contains sections >> > "Description, Example, Json" and then I want to obtain each "Example" >> from >> > each "page" that I have queried and do things with it; like perhaps >> create >> > a graph. >> > >> > Something very similar to FindStat.org, really - >> http://www.findstat.org/(which uses MoinMoin). Note that while this >> looks like it makes a lot of >> > use of MoinMoin, infact almost all the work is done through MoinMoin >> > "macros", written in Python. I want to re-use as much of the wiki as >> > possible. >> > >> > >> > >> > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < >> anthony.briggs at gmail.com>wrote: >> > >> >> Trac is pretty painful to set up, from memory. >> >> >> >> It might help if you gave us some more detail about what you're trying >> to >> >> do, rather than a list of features. eg. The iPython notebook will let >> you >> >> execute arbitrary code, but I don't know whether it can introspect and >> pull >> >> bits of other pages in the same notebook. >> >> >> >> Failling that, it might be relatively easy to roll your own, either >> with >> >> Django or some combination of Flask/Peewee/Jinja/similar. >> >> >> >> Anthony >> >> >> >> >> >> >> >> On 30 January 2014 13:36, Noon Silk wrote: >> >> >> >>> > There is Django snippets ... https://djangosnippets.org >> >>> > and Pastebin ... http://pastebin.com/ >> >>> >> >>> ..., these are both websites. I'm looking for something to customise >> >>> myself. >> >>> >> >>> >> >>> > Also, have you looked at the Trac wiki? Most people would use it for >> >>> > the ticketing but it also has useful wiki with markup permitting >> code. >> >>> >> >>> I hadn't considered Trac for this, thanks for reminding me about it. >> I'm >> >>> not sure it's right, though. >> >>> >> >>> >> >>> >> >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < >> miked at dewhirst.com.au>wrote: >> >>> >> >>>> On 30/01/2014 11:56am, Noon Silk wrote: >> >>>> >> >>>>> Hello, >> >>>>> >> >>>>> So I'm interested in a python-based wiki that I can write >> arbitrary >> >>>>> python code in; perhaps with a view to: >> >>>>> 1) Creating specific templates, >> >>>>> 2) Arbitrarily querying the list of pages, >> >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section >> in >> >>>>> the template as "json", then I'd want to grab the json from pages A, >> >>>>> B, X, Y >> >>>>> >> >>>>> Anyone know of something out there that does this? >> >>>>> >> >>>> >> >>>> There is Django snippets ... https://djangosnippets.org >> >>>> and Pastebin ... http://pastebin.com/ >> >>>> >> >>>> Also, have you looked at the Trac wiki? Most people would use it for >> >>>> the ticketing but it also has useful wiki with markup permitting >> code. >> >>>> >> >>>> Mike >> >>>> >> >>>> At the moment all >> >>>> >> >>>>> I can think of is MoinMoin [1]. >> >>>>> >> >>>>> [1] http://moinmo.in/MoinMoinWiki >> >>>>> -- >> >>>>> Noon Silk >> >>>>> >> >>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >>>>> >> >>>>> "Every morning when I wake up, I experience an exquisite joy -- the >> joy >> >>>>> of being this signature." >> >>>>> >> >>>>> >> >>>>> _______________________________________________ >> >>>>> melbourne-pug mailing list >> >>>>> melbourne-pug at python.org >> >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >>>>> >> >>>>> >> >>>> _______________________________________________ >> >>>> melbourne-pug mailing list >> >>>> melbourne-pug at python.org >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >>>> >> >>> >> >>> >> >>> >> >>> -- >> >>> Noon Silk >> >>> >> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >>> >> >>> "Every morning when I wake up, I experience an exquisite joy -- the >> joy >> >>> of being this signature." >> >>> >> >>> _______________________________________________ >> >>> melbourne-pug mailing list >> >>> melbourne-pug at python.org >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >>> >> >>> >> >> >> >> _______________________________________________ >> >> melbourne-pug mailing list >> >> melbourne-pug at python.org >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> >> > >> > >> > -- >> > Noon Silk >> > >> > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> > >> > "Every morning when I wake up, I experience an exquisite joy -- the joy >> > of being this signature." >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: < >> http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a667f201/attachment.html >> > >> >> ------------------------------ >> >> Subject: Digest Footer >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> ------------------------------ >> >> End of melbourne-pug Digest, Vol 91, Issue 19 >> ********************************************* >> > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy -- the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: From lars at yencken.org Thu Jan 30 06:38:45 2014 From: lars at yencken.org (Lars Yencken) Date: Thu, 30 Jan 2014 16:38:45 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: I recall Nicole Harris gave a talk on Mezzanine at our meetup last year: http://mezzanine.jupo.org/ It's billed as a CMS, not a wiki, but if your users are trusted staff it might be just fine. On 30 January 2014 15:32, Tim Richardson wrote: > web2py has a built-in wiki. Have a look at the docs and see if it's > interesting. > > > On Thu, Jan 30, 2014 at 3:11 PM, Anthony Briggs wrote: > >> I don't know of anything like that off of the top of my head, but from a >> quick search there are a few lightweight wikis around which might be >> possible to hack on, eg. https://pypi.python.org/pypi/djiki and >> https://pypi.python.org/pypi/valet. Perhaps they might get you further >> than MoinMoin? >> >> >> On 30 January 2014 14:53, Noon Silk wrote: >> >>> > It might help if you gave us some more detail about what you're trying >>> to >>> > do, rather than a list of features. eg. The iPython notebook will let >>> you >>> > execute arbitrary code, but I don't know whether it can introspect and >>> > pull bits of other pages in the same notebook. >>> >>> I want a Wiki - community editable, versionable, trivial setup, with >>> some customisability to query the pages that the wiki has, and obtain bits >>> of the pages - say I create a template page and it always contains sections >>> "Description, Example, Json" and then I want to obtain each "Example" from >>> each "page" that I have queried and do things with it; like perhaps create >>> a graph. >>> >>> Something very similar to FindStat.org, really - >>> http://www.findstat.org/ (which uses MoinMoin). Note that while this >>> looks like it makes a lot of use of MoinMoin, infact almost all the work is >>> done through MoinMoin "macros", written in Python. I want to re-use as much >>> of the wiki as possible. >>> >>> >>> >>> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < >>> anthony.briggs at gmail.com> wrote: >>> >>>> Trac is pretty painful to set up, from memory. >>>> >>>> It might help if you gave us some more detail about what you're trying >>>> to do, rather than a list of features. eg. The iPython notebook will let >>>> you execute arbitrary code, but I don't know whether it can introspect and >>>> pull bits of other pages in the same notebook. >>>> >>>> Failling that, it might be relatively easy to roll your own, either >>>> with Django or some combination of Flask/Peewee/Jinja/similar. >>>> >>>> Anthony >>>> >>>> >>>> >>>> On 30 January 2014 13:36, Noon Silk wrote: >>>> >>>>> > There is Django snippets ... https://djangosnippets.org >>>>> > and Pastebin ... http://pastebin.com/ >>>>> >>>>> ..., these are both websites. I'm looking for something to customise >>>>> myself. >>>>> >>>>> >>>>> > Also, have you looked at the Trac wiki? Most people would use it >>>>> for >>>>> > the ticketing but it also has useful wiki with markup permitting >>>>> code. >>>>> >>>>> I hadn't considered Trac for this, thanks for reminding me about it. >>>>> I'm not sure it's right, though. >>>>> >>>>> >>>>> >>>>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst >>>> > wrote: >>>>> >>>>>> On 30/01/2014 11:56am, Noon Silk wrote: >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> So I'm interested in a python-based wiki that I can write >>>>>>> arbitrary >>>>>>> python code in; perhaps with a view to: >>>>>>> 1) Creating specific templates, >>>>>>> 2) Arbitrarily querying the list of pages, >>>>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section in >>>>>>> the template as "json", then I'd want to grab the json from pages A, >>>>>>> B, X, Y >>>>>>> >>>>>>> Anyone know of something out there that does this? >>>>>>> >>>>>> >>>>>> There is Django snippets ... https://djangosnippets.org >>>>>> and Pastebin ... http://pastebin.com/ >>>>>> >>>>>> Also, have you looked at the Trac wiki? Most people would use it for >>>>>> the ticketing but it also has useful wiki with markup permitting code. >>>>>> >>>>>> Mike >>>>>> >>>>>> At the moment all >>>>>> >>>>>>> I can think of is MoinMoin [1]. >>>>>>> >>>>>>> [1] http://moinmo.in/MoinMoinWiki >>>>>>> -- >>>>>>> Noon Silk >>>>>>> >>>>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>>>> >>>>>>> "Every morning when I wake up, I experience an exquisite joy ? the >>>>>>> joy >>>>>>> of being this signature." >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> melbourne-pug mailing list >>>>>>> melbourne-pug at python.org >>>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> melbourne-pug mailing list >>>>>> melbourne-pug at python.org >>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Noon Silk >>>>> >>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>> >>>>> "Every morning when I wake up, I experience an exquisite joy ? the joy >>>>> of being this signature." >>>>> >>>>> _______________________________________________ >>>>> melbourne-pug mailing list >>>>> melbourne-pug at python.org >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> >>> >>> -- >>> Noon Silk >>> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>> >>> "Every morning when I wake up, I experience an exquisite joy ? the joy >>> of being this signature." >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > > -- > > > > *Tim Richardson, Director* > GrowthPath, Data-driven profit growth > > Mobile: +61 423 091 732 > Office: +61 3 8678 1850 > I tweet useful business & IT tips at growthpath_au > > GrowthPath Pty Ltd > ABN 76 133 733 963 > > > > > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From miked at dewhirst.com.au Thu Jan 30 07:17:39 2014 From: miked at dewhirst.com.au (Mike Dewhirst) Date: Thu, 30 Jan 2014 17:17:39 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 19 In-Reply-To: References: Message-ID: <52E9EE83.2020302@dewhirst.com.au> On 30/01/2014 4:26pm, Noon Silk wrote: > > +1 to MoinMoin. > > I use it myself as a personal wiki. > > From a hack-ability perspective, it is straightforward to hack and > create your macros. > > Templates and Access Control Lists come out of the box. > > Cheers yeah, I also found it really easy to do that. I was concerned it > didn't have a way to query it's list of pages though; but indeed it > does. I've not tried it out, but it at least looks acceptable (i.e. not > as bad as walking the filesystem to find them all). I'm just not sure > how well it would support looking easily for particular bits of the > pages; but maybe I can store it as metadata somehow; I don't know, but > at least is looking a bit promising. Check out pss. It apparently does all its work in a library with an API. http://eli.thegreenplace.net/2011/10/14/announcing-pss-a-tool-for-searching-inside-source-code/ > > > > > On Thu, Jan 30, 2014 at 3:35 PM, Kiran Busi > wrote: > > +1 to MoinMoin. > I use it myself as a personal wiki. > From a hack-ability perspective, it is straightforward to hack and > create your macros. > Templates and Access Control Lists come out of the box. > > > > > On Thu, Jan 30, 2014 at 3:11 PM, > wrote: > > Send melbourne-pug mailing list submissions to > melbourne-pug at python.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://mail.python.org/mailman/listinfo/melbourne-pug > or, via email, send a message with subject or body 'help' to > melbourne-pug-request at python.org > > > You can reach the person managing the list at > melbourne-pug-owner at python.org > > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of melbourne-pug digest..." > > > Today's Topics: > > 1. Re: python-based wiki with nice query-/template-ability? > (Noon Silk) > 2. Re: python-based wiki with nice query-/template-ability? > (Anthony Briggs) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 30 Jan 2014 14:53:20 +1100 > From: Noon Silk > > To: Melbourne Python Users Group > > Subject: Re: [melbourne-pug] python-based wiki with nice > query-/template-ability? > Message-ID: > > > > Content-Type: text/plain; charset="iso-8859-1" > > > It might help if you gave us some more detail about what > you're trying to > > do, rather than a list of features. eg. The iPython notebook > will let you > > execute arbitrary code, but I don't know whether it can > introspect and > > pull bits of other pages in the same notebook. > > I want a Wiki - community editable, versionable, trivial setup, > with some > customisability to query the pages that the wiki has, and obtain > bits of > the pages - say I create a template page and it always contains > sections > "Description, Example, Json" and then I want to obtain each > "Example" from > each "page" that I have queried and do things with it; like > perhaps create > a graph. > > Something very similar to FindStat.org, really - > http://www.findstat.org/(which uses MoinMoin). Note that while this > looks like it makes a lot of > use of MoinMoin, infact almost all the work is done through MoinMoin > "macros", written in Python. I want to re-use as much of the wiki as > possible. > > > > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs > >wrote: > > > Trac is pretty painful to set up, from memory. > > > > It might help if you gave us some more detail about what > you're trying to > > do, rather than a list of features. eg. The iPython notebook > will let you > > execute arbitrary code, but I don't know whether it can > introspect and pull > > bits of other pages in the same notebook. > > > > Failling that, it might be relatively easy to roll your own, > either with > > Django or some combination of Flask/Peewee/Jinja/similar. > > > > Anthony > > > > > > > > On 30 January 2014 13:36, Noon Silk > wrote: > > > >> > There is Django snippets ... https://djangosnippets.org > >> > and Pastebin ... http://pastebin.com/ > >> > >> ..., these are both websites. I'm looking for something to > customise > >> myself. > >> > >> > >> > Also, have you looked at the Trac wiki? Most people would > use it for > >> > the ticketing but it also has useful wiki with markup > permitting code. > >> > >> I hadn't considered Trac for this, thanks for reminding me > about it. I'm > >> not sure it's right, though. > >> > >> > >> > >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst > >wrote: > >> > >>> On 30/01/2014 11:56am, Noon Silk wrote: > >>> > >>>> Hello, > >>>> > >>>> So I'm interested in a python-based wiki that I can > write arbitrary > >>>> python code in; perhaps with a view to: > >>>> 1) Creating specific templates, > >>>> 2) Arbitrarily querying the list of pages, > >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a > section in > >>>> the template as "json", then I'd want to grab the json > from pages A, B, > >>>> X, Y > >>>> > >>>> Anyone know of something out there that does this? > >>>> > >>> > >>> There is Django snippets ... https://djangosnippets.org > >>> and Pastebin ... http://pastebin.com/ > >>> > >>> Also, have you looked at the Trac wiki? Most people would > use it for the > >>> ticketing but it also has useful wiki with markup > permitting code. > >>> > >>> Mike > >>> > >>> At the moment all > >>> > >>>> I can think of is MoinMoin [1]. > >>>> > >>>> [1] http://moinmo.in/MoinMoinWiki > >>>> -- > >>>> Noon Silk > >>>> > >>>> Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > >>>> > >>>> "Every morning when I wake up, I experience an exquisite > joy -- the joy > >>>> of being this signature." > >>>> > >>>> > >>>> _______________________________________________ > >>>> melbourne-pug mailing list > >>>> melbourne-pug at python.org > >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >> > >> > >> > >> -- > >> Noon Silk > >> > >> Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > >> > >> "Every morning when I wake up, I experience an exquisite joy > -- the joy > >> of being this signature." > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy -- > the joy > of being this signature." > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > > ------------------------------ > > Message: 2 > Date: Thu, 30 Jan 2014 15:11:37 +1100 > From: Anthony Briggs > > To: Melbourne Python Users Group > > Subject: Re: [melbourne-pug] python-based wiki with nice > query-/template-ability? > Message-ID: > > > > Content-Type: text/plain; charset="iso-8859-1" > > I don't know of anything like that off of the top of my head, > but from a > quick search there are a few lightweight wikis around which might be > possible to hack on, eg. https://pypi.python.org/pypi/djiki and > https://pypi.python.org/pypi/valet. Perhaps they might get you > further than > MoinMoin? > > > On 30 January 2014 14:53, Noon Silk > wrote: > > > > It might help if you gave us some more detail about what > you're trying > > to > > > do, rather than a list of features. eg. The iPython > notebook will let > > you > > > execute arbitrary code, but I don't know whether it can > introspect and > > > pull bits of other pages in the same notebook. > > > > I want a Wiki - community editable, versionable, trivial > setup, with some > > customisability to query the pages that the wiki has, and > obtain bits of > > the pages - say I create a template page and it always > contains sections > > "Description, Example, Json" and then I want to obtain each > "Example" from > > each "page" that I have queried and do things with it; like > perhaps create > > a graph. > > > > Something very similar to FindStat.org, really - > http://www.findstat.org/(which uses MoinMoin). Note that while > this looks like it makes a lot of > > use of MoinMoin, infact almost all the work is done through > MoinMoin > > "macros", written in Python. I want to re-use as much of the > wiki as > > possible. > > > > > > > > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs > >wrote: > > > >> Trac is pretty painful to set up, from memory. > >> > >> It might help if you gave us some more detail about what > you're trying to > >> do, rather than a list of features. eg. The iPython notebook > will let you > >> execute arbitrary code, but I don't know whether it can > introspect and pull > >> bits of other pages in the same notebook. > >> > >> Failling that, it might be relatively easy to roll your own, > either with > >> Django or some combination of Flask/Peewee/Jinja/similar. > >> > >> Anthony > >> > >> > >> > >> On 30 January 2014 13:36, Noon Silk > wrote: > >> > >>> > There is Django snippets ... https://djangosnippets.org > >>> > and Pastebin ... http://pastebin.com/ > >>> > >>> ..., these are both websites. I'm looking for something to > customise > >>> myself. > >>> > >>> > >>> > Also, have you looked at the Trac wiki? Most people would > use it for > >>> > the ticketing but it also has useful wiki with markup > permitting code. > >>> > >>> I hadn't considered Trac for this, thanks for reminding me > about it. I'm > >>> not sure it's right, though. > >>> > >>> > >>> > >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst > >wrote: > >>> > >>>> On 30/01/2014 11:56am, Noon Silk wrote: > >>>> > >>>>> Hello, > >>>>> > >>>>> So I'm interested in a python-based wiki that I can > write arbitrary > >>>>> python code in; perhaps with a view to: > >>>>> 1) Creating specific templates, > >>>>> 2) Arbitrarily querying the list of pages, > >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark > a section in > >>>>> the template as "json", then I'd want to grab the json > from pages A, > >>>>> B, X, Y > >>>>> > >>>>> Anyone know of something out there that does this? > >>>>> > >>>> > >>>> There is Django snippets ... https://djangosnippets.org > >>>> and Pastebin ... http://pastebin.com/ > >>>> > >>>> Also, have you looked at the Trac wiki? Most people would > use it for > >>>> the ticketing but it also has useful wiki with markup > permitting code. > >>>> > >>>> Mike > >>>> > >>>> At the moment all > >>>> > >>>>> I can think of is MoinMoin [1]. > >>>>> > >>>>> [1] http://moinmo.in/MoinMoinWiki > >>>>> -- > >>>>> Noon Silk > >>>>> > >>>>> Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > >>>>> > >>>>> "Every morning when I wake up, I experience an exquisite > joy -- the joy > >>>>> of being this signature." > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> melbourne-pug mailing list > >>>>> melbourne-pug at python.org > >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>>> > >>>>> > >>>> _______________________________________________ > >>>> melbourne-pug mailing list > >>>> melbourne-pug at python.org > >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>>> > >>> > >>> > >>> > >>> -- > >>> Noon Silk > >>> > >>> Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > >>> > >>> "Every morning when I wake up, I experience an exquisite > joy -- the joy > >>> of being this signature." > >>> > >>> _______________________________________________ > >>> melbourne-pug mailing list > >>> melbourne-pug at python.org > >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >>> > >>> > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > > > > > > -- > > Noon Silk > > > > Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > > > > "Every morning when I wake up, I experience an exquisite joy > -- the joy > > of being this signature." > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > ------------------------------ > > End of melbourne-pug Digest, Vol 91, Issue 19 > ********************************************* > > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy ? the joy > of being this signature." > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From tim at growthpath.com.au Thu Jan 30 08:18:42 2014 From: tim at growthpath.com.au (Tim Richardson) Date: Thu, 30 Jan 2014 18:18:42 +1100 Subject: [melbourne-pug] python-based wiki with nice query-/template-ability? In-Reply-To: References: <52E9A825.7060400@dewhirst.com.au> Message-ID: I should have provided a link too: This is the web2py book on the built-in wiki: http://www.web2py.com/books/default/chapter/29/03/overview?search=wiki#The-built-in-web2py-wiki web2py is a "Free open source full-stack framework for rapid development of fast, scalable, secureand portable database-driven web-based applications. Written and programmable in Python ." or in other words it's a high-level general purpose web development platform which has a reasonable wiki built-in. There are binary distributions with potted python if you want to have a quick look. On Thu, Jan 30, 2014 at 4:38 PM, Lars Yencken wrote: > I recall Nicole Harris gave a talk on Mezzanine at our meetup last year: > > http://mezzanine.jupo.org/ > > It's billed as a CMS, not a wiki, but if your users are trusted staff it > might be just fine. > > > On 30 January 2014 15:32, Tim Richardson wrote: > >> web2py has a built-in wiki. Have a look at the docs and see if it's >> interesting. >> >> >> On Thu, Jan 30, 2014 at 3:11 PM, Anthony Briggs > > wrote: >> >>> I don't know of anything like that off of the top of my head, but from a >>> quick search there are a few lightweight wikis around which might be >>> possible to hack on, eg. https://pypi.python.org/pypi/djiki and >>> https://pypi.python.org/pypi/valet. Perhaps they might get you further >>> than MoinMoin? >>> >>> >>> On 30 January 2014 14:53, Noon Silk wrote: >>> >>>> > It might help if you gave us some more detail about what you're >>>> trying to >>>> > do, rather than a list of features. eg. The iPython notebook will let >>>> you >>>> > execute arbitrary code, but I don't know whether it can introspect >>>> and >>>> > pull bits of other pages in the same notebook. >>>> >>>> I want a Wiki - community editable, versionable, trivial setup, with >>>> some customisability to query the pages that the wiki has, and obtain bits >>>> of the pages - say I create a template page and it always contains sections >>>> "Description, Example, Json" and then I want to obtain each "Example" from >>>> each "page" that I have queried and do things with it; like perhaps create >>>> a graph. >>>> >>>> Something very similar to FindStat.org, really - >>>> http://www.findstat.org/ (which uses MoinMoin). Note that while this >>>> looks like it makes a lot of use of MoinMoin, infact almost all the work is >>>> done through MoinMoin "macros", written in Python. I want to re-use as much >>>> of the wiki as possible. >>>> >>>> >>>> >>>> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < >>>> anthony.briggs at gmail.com> wrote: >>>> >>>>> Trac is pretty painful to set up, from memory. >>>>> >>>>> It might help if you gave us some more detail about what you're trying >>>>> to do, rather than a list of features. eg. The iPython notebook will let >>>>> you execute arbitrary code, but I don't know whether it can introspect and >>>>> pull bits of other pages in the same notebook. >>>>> >>>>> Failling that, it might be relatively easy to roll your own, either >>>>> with Django or some combination of Flask/Peewee/Jinja/similar. >>>>> >>>>> Anthony >>>>> >>>>> >>>>> >>>>> On 30 January 2014 13:36, Noon Silk wrote: >>>>> >>>>>> > There is Django snippets ... https://djangosnippets.org >>>>>> > and Pastebin ... http://pastebin.com/ >>>>>> >>>>>> ..., these are both websites. I'm looking for something to customise >>>>>> myself. >>>>>> >>>>>> >>>>>> > Also, have you looked at the Trac wiki? Most people would use it >>>>>> for >>>>>> > the ticketing but it also has useful wiki with markup permitting >>>>>> code. >>>>>> >>>>>> I hadn't considered Trac for this, thanks for reminding me about it. >>>>>> I'm not sure it's right, though. >>>>>> >>>>>> >>>>>> >>>>>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < >>>>>> miked at dewhirst.com.au> wrote: >>>>>> >>>>>>> On 30/01/2014 11:56am, Noon Silk wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> So I'm interested in a python-based wiki that I can write >>>>>>>> arbitrary >>>>>>>> python code in; perhaps with a view to: >>>>>>>> 1) Creating specific templates, >>>>>>>> 2) Arbitrarily querying the list of pages, >>>>>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section >>>>>>>> in >>>>>>>> the template as "json", then I'd want to grab the json from pages >>>>>>>> A, B, X, Y >>>>>>>> >>>>>>>> Anyone know of something out there that does this? >>>>>>>> >>>>>>> >>>>>>> There is Django snippets ... https://djangosnippets.org >>>>>>> and Pastebin ... http://pastebin.com/ >>>>>>> >>>>>>> Also, have you looked at the Trac wiki? Most people would use it for >>>>>>> the ticketing but it also has useful wiki with markup permitting code. >>>>>>> >>>>>>> Mike >>>>>>> >>>>>>> At the moment all >>>>>>> >>>>>>>> I can think of is MoinMoin [1]. >>>>>>>> >>>>>>>> [1] http://moinmo.in/MoinMoinWiki >>>>>>>> -- >>>>>>>> Noon Silk >>>>>>>> >>>>>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>>>>> >>>>>>>> "Every morning when I wake up, I experience an exquisite joy -- the >>>>>>>> joy >>>>>>>> of being this signature." >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> melbourne-pug mailing list >>>>>>>> melbourne-pug at python.org >>>>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> melbourne-pug mailing list >>>>>>> melbourne-pug at python.org >>>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Noon Silk >>>>>> >>>>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>>>> >>>>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>>>> of being this signature." >>>>>> >>>>>> _______________________________________________ >>>>>> melbourne-pug mailing list >>>>>> melbourne-pug at python.org >>>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> melbourne-pug mailing list >>>>> melbourne-pug at python.org >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>>> >>>>> >>>> >>>> >>>> -- >>>> Noon Silk >>>> >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >>>> >>>> "Every morning when I wake up, I experience an exquisite joy -- the joy >>>> of being this signature." >>>> >>>> _______________________________________________ >>>> melbourne-pug mailing list >>>> melbourne-pug at python.org >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >>>> >>>> >>> >>> _______________________________________________ >>> melbourne-pug mailing list >>> melbourne-pug at python.org >>> https://mail.python.org/mailman/listinfo/melbourne-pug >>> >>> >> >> >> -- >> >> >> >> *Tim Richardson, Director* >> GrowthPath, Data-driven profit growth >> >> Mobile: +61 423 091 732 >> Office: +61 3 8678 1850 >> I tweet useful business & IT tips at growthpath_au >> >> GrowthPath Pty Ltd >> ABN 76 133 733 963 >> >> >> >> >> >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- *Tim Richardson, Director* GrowthPath, Data-driven profit growth Mobile: +61 423 091 732 Office: +61 3 8678 1850 I tweet useful business & IT tips at growthpath_au GrowthPath Pty Ltd ABN 76 133 733 963 -------------- next part -------------- An HTML attachment was scrubbed... URL: From kiran.busi at gmail.com Thu Jan 30 06:31:21 2014 From: kiran.busi at gmail.com (Kiran Busi) Date: Thu, 30 Jan 2014 16:31:21 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 21 In-Reply-To: References: Message-ID: >I'm just not sure how well it would support looking easily for particular bits of the pages You can search by titles or text. To look for bits of the page, you'd start with text search. So far I haven't had much use for the search as organization of my wiki seems more reliable way to find what i need. I've considered moinmoin 2.0 but it seems bit far ready from production use. On Thu, Jan 30, 2014 at 4:26 PM, wrote: > Send melbourne-pug mailing list submissions to > melbourne-pug at python.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://mail.python.org/mailman/listinfo/melbourne-pug > or, via email, send a message with subject or body 'help' to > melbourne-pug-request at python.org > > You can reach the person managing the list at > melbourne-pug-owner at python.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of melbourne-pug digest..." > > > Today's Topics: > > 1. Re: melbourne-pug Digest, Vol 91, Issue 19 (Noon Silk) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 30 Jan 2014 16:26:45 +1100 > From: Noon Silk > To: Melbourne Python Users Group > Subject: Re: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 19 > Message-ID: > < > CADt_azbZMzJqMQJ8AkED_YnOVnu2zMzB-tsk3iqeuDujViYprA at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > +1 to MoinMoin. > > I use it myself as a personal wiki. > > From a hack-ability perspective, it is straightforward to hack and create > your macros. > > Templates and Access Control Lists come out of the box. > > Cheers yeah, I also found it really easy to do that. I was concerned it > didn't have a way to query it's list of pages though; but indeed it does. > I've not tried it out, but it at least looks acceptable (i.e. not as bad as > walking the filesystem to find them all). I'm just not sure how well it > would support looking easily for particular bits of the pages; but maybe I > can store it as metadata somehow; I don't know, but at least is looking a > bit promising. > > > > > On Thu, Jan 30, 2014 at 3:35 PM, Kiran Busi wrote: > > > +1 to MoinMoin. > > I use it myself as a personal wiki. > > From a hack-ability perspective, it is straightforward to hack and create > > your macros. > > Templates and Access Control Lists come out of the box. > > > > > > > > > > On Thu, Jan 30, 2014 at 3:11 PM, > wrote: > > > >> Send melbourne-pug mailing list submissions to > >> melbourne-pug at python.org > >> > >> To subscribe or unsubscribe via the World Wide Web, visit > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> or, via email, send a message with subject or body 'help' to > >> melbourne-pug-request at python.org > >> > >> You can reach the person managing the list at > >> melbourne-pug-owner at python.org > >> > >> When replying, please edit your Subject line so it is more specific > >> than "Re: Contents of melbourne-pug digest..." > >> > >> > >> Today's Topics: > >> > >> 1. Re: python-based wiki with nice query-/template-ability? > >> (Noon Silk) > >> 2. Re: python-based wiki with nice query-/template-ability? > >> (Anthony Briggs) > >> > >> > >> ---------------------------------------------------------------------- > >> > >> Message: 1 > >> Date: Thu, 30 Jan 2014 14:53:20 +1100 > >> From: Noon Silk > >> To: Melbourne Python Users Group > >> Subject: Re: [melbourne-pug] python-based wiki with nice > >> query-/template-ability? > >> Message-ID: > >> < > >> CADt_azb8M9eBdeoq2L8UuWHvNj8hcxaaE+4tKGe+RaDXTQsi6w at mail.gmail.com> > >> Content-Type: text/plain; charset="iso-8859-1" > >> > >> > It might help if you gave us some more detail about what you're trying > >> to > >> > do, rather than a list of features. eg. The iPython notebook will let > >> you > >> > execute arbitrary code, but I don't know whether it can introspect and > >> > pull bits of other pages in the same notebook. > >> > >> I want a Wiki - community editable, versionable, trivial setup, with > some > >> customisability to query the pages that the wiki has, and obtain bits of > >> the pages - say I create a template page and it always contains sections > >> "Description, Example, Json" and then I want to obtain each "Example" > from > >> each "page" that I have queried and do things with it; like perhaps > create > >> a graph. > >> > >> Something very similar to FindStat.org, really - > >> http://www.findstat.org/(which uses MoinMoin). Note that while this > >> looks like it makes a lot of > >> use of MoinMoin, infact almost all the work is done through MoinMoin > >> "macros", written in Python. I want to re-use as much of the wiki as > >> possible. > >> > >> > >> > >> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < > anthony.briggs at gmail.com > >> >wrote: > >> > >> > Trac is pretty painful to set up, from memory. > >> > > >> > It might help if you gave us some more detail about what you're trying > >> to > >> > do, rather than a list of features. eg. The iPython notebook will let > >> you > >> > execute arbitrary code, but I don't know whether it can introspect and > >> pull > >> > bits of other pages in the same notebook. > >> > > >> > Failling that, it might be relatively easy to roll your own, either > with > >> > Django or some combination of Flask/Peewee/Jinja/similar. > >> > > >> > Anthony > >> > > >> > > >> > > >> > On 30 January 2014 13:36, Noon Silk wrote: > >> > > >> >> > There is Django snippets ... https://djangosnippets.org > >> >> > and Pastebin ... http://pastebin.com/ > >> >> > >> >> ..., these are both websites. I'm looking for something to customise > >> >> myself. > >> >> > >> >> > >> >> > Also, have you looked at the Trac wiki? Most people would use it > for > >> >> > the ticketing but it also has useful wiki with markup permitting > >> code. > >> >> > >> >> I hadn't considered Trac for this, thanks for reminding me about it. > >> I'm > >> >> not sure it's right, though. > >> >> > >> >> > >> >> > >> >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < > miked at dewhirst.com.au > >> >wrote: > >> >> > >> >>> On 30/01/2014 11:56am, Noon Silk wrote: > >> >>> > >> >>>> Hello, > >> >>>> > >> >>>> So I'm interested in a python-based wiki that I can write > >> arbitrary > >> >>>> python code in; perhaps with a view to: > >> >>>> 1) Creating specific templates, > >> >>>> 2) Arbitrarily querying the list of pages, > >> >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section > in > >> >>>> the template as "json", then I'd want to grab the json from pages > A, > >> B, > >> >>>> X, Y > >> >>>> > >> >>>> Anyone know of something out there that does this? > >> >>>> > >> >>> > >> >>> There is Django snippets ... https://djangosnippets.org > >> >>> and Pastebin ... http://pastebin.com/ > >> >>> > >> >>> Also, have you looked at the Trac wiki? Most people would use it for > >> the > >> >>> ticketing but it also has useful wiki with markup permitting code. > >> >>> > >> >>> Mike > >> >>> > >> >>> At the moment all > >> >>> > >> >>>> I can think of is MoinMoin [1]. > >> >>>> > >> >>>> [1] http://moinmo.in/MoinMoinWiki > >> >>>> -- > >> >>>> Noon Silk > >> >>>> > >> >>>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> >>>> > >> >>>> "Every morning when I wake up, I experience an exquisite joy -- the > >> joy > >> >>>> of being this signature." > >> >>>> > >> >>>> > >> >>>> _______________________________________________ > >> >>>> melbourne-pug mailing list > >> >>>> melbourne-pug at python.org > >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >>>> > >> >>>> > >> >>> _______________________________________________ > >> >>> melbourne-pug mailing list > >> >>> melbourne-pug at python.org > >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >>> > >> >> > >> >> > >> >> > >> >> -- > >> >> Noon Silk > >> >> > >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> >> > >> >> "Every morning when I wake up, I experience an exquisite joy -- the > joy > >> >> of being this signature." > >> >> > >> >> _______________________________________________ > >> >> melbourne-pug mailing list > >> >> melbourne-pug at python.org > >> >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >> > >> >> > >> > > >> > _______________________________________________ > >> > melbourne-pug mailing list > >> > melbourne-pug at python.org > >> > https://mail.python.org/mailman/listinfo/melbourne-pug > >> > > >> > > >> > >> > >> -- > >> Noon Silk > >> > >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> > >> "Every morning when I wake up, I experience an exquisite joy -- the joy > >> of being this signature." > >> -------------- next part -------------- > >> An HTML attachment was scrubbed... > >> URL: < > >> > http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/619b8947/attachment-0001.html > >> > > >> > >> ------------------------------ > >> > >> Message: 2 > >> Date: Thu, 30 Jan 2014 15:11:37 +1100 > >> From: Anthony Briggs > >> To: Melbourne Python Users Group > >> Subject: Re: [melbourne-pug] python-based wiki with nice > >> query-/template-ability? > >> Message-ID: > >> < > >> CAO4-38_ea+ass4aeochGy6UgogXN70g5L5YBwrGoWCuw+yhLHQ at mail.gmail.com> > >> Content-Type: text/plain; charset="iso-8859-1" > >> > >> I don't know of anything like that off of the top of my head, but from a > >> quick search there are a few lightweight wikis around which might be > >> possible to hack on, eg. https://pypi.python.org/pypi/djiki and > >> https://pypi.python.org/pypi/valet. Perhaps they might get you further > >> than > >> MoinMoin? > >> > >> > >> On 30 January 2014 14:53, Noon Silk wrote: > >> > >> > > It might help if you gave us some more detail about what you're > trying > >> > to > >> > > do, rather than a list of features. eg. The iPython notebook will > let > >> > you > >> > > execute arbitrary code, but I don't know whether it can introspect > and > >> > > pull bits of other pages in the same notebook. > >> > > >> > I want a Wiki - community editable, versionable, trivial setup, with > >> some > >> > customisability to query the pages that the wiki has, and obtain bits > of > >> > the pages - say I create a template page and it always contains > sections > >> > "Description, Example, Json" and then I want to obtain each "Example" > >> from > >> > each "page" that I have queried and do things with it; like perhaps > >> create > >> > a graph. > >> > > >> > Something very similar to FindStat.org, really - > >> http://www.findstat.org/(which uses MoinMoin). Note that while this > >> looks like it makes a lot of > >> > use of MoinMoin, infact almost all the work is done through MoinMoin > >> > "macros", written in Python. I want to re-use as much of the wiki as > >> > possible. > >> > > >> > > >> > > >> > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < > >> anthony.briggs at gmail.com>wrote: > >> > > >> >> Trac is pretty painful to set up, from memory. > >> >> > >> >> It might help if you gave us some more detail about what you're > trying > >> to > >> >> do, rather than a list of features. eg. The iPython notebook will let > >> you > >> >> execute arbitrary code, but I don't know whether it can introspect > and > >> pull > >> >> bits of other pages in the same notebook. > >> >> > >> >> Failling that, it might be relatively easy to roll your own, either > >> with > >> >> Django or some combination of Flask/Peewee/Jinja/similar. > >> >> > >> >> Anthony > >> >> > >> >> > >> >> > >> >> On 30 January 2014 13:36, Noon Silk wrote: > >> >> > >> >>> > There is Django snippets ... https://djangosnippets.org > >> >>> > and Pastebin ... http://pastebin.com/ > >> >>> > >> >>> ..., these are both websites. I'm looking for something to customise > >> >>> myself. > >> >>> > >> >>> > >> >>> > Also, have you looked at the Trac wiki? Most people would use it > for > >> >>> > the ticketing but it also has useful wiki with markup permitting > >> code. > >> >>> > >> >>> I hadn't considered Trac for this, thanks for reminding me about it. > >> I'm > >> >>> not sure it's right, though. > >> >>> > >> >>> > >> >>> > >> >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < > >> miked at dewhirst.com.au>wrote: > >> >>> > >> >>>> On 30/01/2014 11:56am, Noon Silk wrote: > >> >>>> > >> >>>>> Hello, > >> >>>>> > >> >>>>> So I'm interested in a python-based wiki that I can write > >> arbitrary > >> >>>>> python code in; perhaps with a view to: > >> >>>>> 1) Creating specific templates, > >> >>>>> 2) Arbitrarily querying the list of pages, > >> >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a section > >> in > >> >>>>> the template as "json", then I'd want to grab the json from pages > A, > >> >>>>> B, X, Y > >> >>>>> > >> >>>>> Anyone know of something out there that does this? > >> >>>>> > >> >>>> > >> >>>> There is Django snippets ... https://djangosnippets.org > >> >>>> and Pastebin ... http://pastebin.com/ > >> >>>> > >> >>>> Also, have you looked at the Trac wiki? Most people would use it > for > >> >>>> the ticketing but it also has useful wiki with markup permitting > >> code. > >> >>>> > >> >>>> Mike > >> >>>> > >> >>>> At the moment all > >> >>>> > >> >>>>> I can think of is MoinMoin [1]. > >> >>>>> > >> >>>>> [1] http://moinmo.in/MoinMoinWiki > >> >>>>> -- > >> >>>>> Noon Silk > >> >>>>> > >> >>>>> Fancy a quantum lunch? > https://sites.google.com/site/quantumlunch/ > >> >>>>> > >> >>>>> "Every morning when I wake up, I experience an exquisite joy -- > the > >> joy > >> >>>>> of being this signature." > >> >>>>> > >> >>>>> > >> >>>>> _______________________________________________ > >> >>>>> melbourne-pug mailing list > >> >>>>> melbourne-pug at python.org > >> >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >>>>> > >> >>>>> > >> >>>> _______________________________________________ > >> >>>> melbourne-pug mailing list > >> >>>> melbourne-pug at python.org > >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >>>> > >> >>> > >> >>> > >> >>> > >> >>> -- > >> >>> Noon Silk > >> >>> > >> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> >>> > >> >>> "Every morning when I wake up, I experience an exquisite joy -- the > >> joy > >> >>> of being this signature." > >> >>> > >> >>> _______________________________________________ > >> >>> melbourne-pug mailing list > >> >>> melbourne-pug at python.org > >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >>> > >> >>> > >> >> > >> >> _______________________________________________ > >> >> melbourne-pug mailing list > >> >> melbourne-pug at python.org > >> >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> >> > >> >> > >> > > >> > > >> > -- > >> > Noon Silk > >> > > >> > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > >> > > >> > "Every morning when I wake up, I experience an exquisite joy -- the > joy > >> > of being this signature." > >> > > >> > _______________________________________________ > >> > melbourne-pug mailing list > >> > melbourne-pug at python.org > >> > https://mail.python.org/mailman/listinfo/melbourne-pug > >> > > >> > > >> -------------- next part -------------- > >> An HTML attachment was scrubbed... > >> URL: < > >> > http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a667f201/attachment.html > >> > > >> > >> ------------------------------ > >> > >> Subject: Digest Footer > >> > >> _______________________________________________ > >> melbourne-pug mailing list > >> melbourne-pug at python.org > >> https://mail.python.org/mailman/listinfo/melbourne-pug > >> > >> > >> ------------------------------ > >> > >> End of melbourne-pug Digest, Vol 91, Issue 19 > >> ********************************************* > >> > > > > > > _______________________________________________ > > melbourne-pug mailing list > > melbourne-pug at python.org > > https://mail.python.org/mailman/listinfo/melbourne-pug > > > > > > > -- > Noon Silk > > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ > > "Every morning when I wake up, I experience an exquisite joy -- the joy > of being this signature." > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a88551cd/attachment.html > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > > ------------------------------ > > End of melbourne-pug Digest, Vol 91, Issue 21 > ********************************************* > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dcrisp at netspace.net.au Fri Jan 31 01:28:37 2014 From: dcrisp at netspace.net.au (David Crisp) Date: Fri, 31 Jan 2014 11:28:37 +1100 (EST) Subject: [melbourne-pug] PyQT 5.2 for Python 2.7 32bit Windows package In-Reply-To: References: Message-ID: I bit the bullet and migrated my application to Python 3.3. Was surprisingly easy. The only thing I was using that was not Python3 compatible was the print statements. 2to3.py fixed those up in no time and hey presto a python3 app. Luckily the libraries I need all support pYthon3 as well so.. Pain level was... 0!!!! :) I still dont entirely understand WHY they had to move from print "" to print("") (I have to type two whole charcters more!! over my whole applcation thats a couple of thousand key strokes!!! How dare they! :P..) Actually, my only problem is muscle memory at this point. When I type print i instinctivly press space and type a ". I havent started on PYQT yet but when I do my App is ready. On Wed, 15 Jan 2014, Tim Richardson wrote: > "As of this writing, there are no compiled versions supplied on the > Riverbanks website as the author is, and I quote ?doing my bit to encourage > people to move to > Py3? > " > > > On Wed, Jan 15, 2014 at 11:39 AM, David Crisp wrote: > >> Hello, >> >> I have been looking around for the last hour or so for a PyQT 5.2 Python >> 2.7 32bit windows package and I havent been able to find one at all. I can >> find a PyQt 5.2 for Python 3 but not 2.7 >> >> Does anybody know where I could find said package? I tried the >> unofficial windows python binaries site but they only have QtPy 4.9.6 >> >> Or do I just need to search harder? >> >> Regards, >> David >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> > > > > From tleeuwenburg at gmail.com Fri Jan 31 01:48:26 2014 From: tleeuwenburg at gmail.com (Tennessee Leeuwenburg) Date: Fri, 31 Jan 2014 11:48:26 +1100 Subject: [melbourne-pug] Monday night Message-ID: Looks like I'll be able to make it. I have something I can present if there's time and/or interest. It would take 30 minutes to get through I think, but involve much discussion not just be a data dump. -- -------------------------------------------------- Tennessee Leeuwenburg http://myownhat.blogspot.com/ "Don't believe everything you think" -------------- next part -------------- An HTML attachment was scrubbed... URL: From javier at candeira.com Fri Jan 31 01:52:26 2014 From: javier at candeira.com (Javier Candeira) Date: Fri, 31 Jan 2014 11:52:26 +1100 Subject: [melbourne-pug] Monday night In-Reply-To: References: Message-ID: Hi, Tennessee, It will be great to see you. Please write yourself up on the wiki! J On Fri, Jan 31, 2014 at 11:48 AM, Tennessee Leeuwenburg wrote: > Looks like I'll be able to make it. I have something I can present if > there's time and/or interest. It would take 30 minutes to get through I > think, but involve much discussion not just be a data dump. > > -- > -------------------------------------------------- > Tennessee Leeuwenburg > http://myownhat.blogspot.com/ > "Don't believe everything you think" > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > From noonslists at gmail.com Fri Jan 31 07:56:44 2014 From: noonslists at gmail.com (Noon Silk) Date: Fri, 31 Jan 2014 17:56:44 +1100 Subject: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 21 In-Reply-To: References: Message-ID: > I've considered moinmoin 2.0 but it seems bit far ready from > production use. Any more detail here? Seems like moin2 might be a bit nicer ... Do you mind sharing what problems you found? On Thu, Jan 30, 2014 at 4:31 PM, Kiran Busi wrote: > >I'm just not sure how well it would support looking easily for particular > bits of the pages > You can search by titles or text. To look for bits of the page, you'd > start with text search. > So far I haven't had much use for the search as organization of my wiki > seems more reliable way to find what i need. > I've considered moinmoin 2.0 but it seems bit far ready from production > use. > > On Thu, Jan 30, 2014 at 4:26 PM, wrote: > >> Send melbourne-pug mailing list submissions to >> melbourne-pug at python.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> https://mail.python.org/mailman/listinfo/melbourne-pug >> or, via email, send a message with subject or body 'help' to >> melbourne-pug-request at python.org >> >> You can reach the person managing the list at >> melbourne-pug-owner at python.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of melbourne-pug digest..." >> >> >> Today's Topics: >> >> 1. Re: melbourne-pug Digest, Vol 91, Issue 19 (Noon Silk) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Thu, 30 Jan 2014 16:26:45 +1100 >> From: Noon Silk >> To: Melbourne Python Users Group >> Subject: Re: [melbourne-pug] melbourne-pug Digest, Vol 91, Issue 19 >> Message-ID: >> < >> CADt_azbZMzJqMQJ8AkED_YnOVnu2zMzB-tsk3iqeuDujViYprA at mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> > +1 to MoinMoin. >> > I use it myself as a personal wiki. >> > From a hack-ability perspective, it is straightforward to hack and >> create >> your macros. >> > Templates and Access Control Lists come out of the box. >> >> Cheers yeah, I also found it really easy to do that. I was concerned it >> didn't have a way to query it's list of pages though; but indeed it does. >> I've not tried it out, but it at least looks acceptable (i.e. not as bad >> as >> walking the filesystem to find them all). I'm just not sure how well it >> would support looking easily for particular bits of the pages; but maybe I >> can store it as metadata somehow; I don't know, but at least is looking a >> bit promising. >> >> >> >> >> On Thu, Jan 30, 2014 at 3:35 PM, Kiran Busi wrote: >> >> > +1 to MoinMoin. >> > I use it myself as a personal wiki. >> > From a hack-ability perspective, it is straightforward to hack and >> create >> > your macros. >> > Templates and Access Control Lists come out of the box. >> > >> > >> > >> > >> > On Thu, Jan 30, 2014 at 3:11 PM, >> wrote: >> > >> >> Send melbourne-pug mailing list submissions to >> >> melbourne-pug at python.org >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> or, via email, send a message with subject or body 'help' to >> >> melbourne-pug-request at python.org >> >> >> >> You can reach the person managing the list at >> >> melbourne-pug-owner at python.org >> >> >> >> When replying, please edit your Subject line so it is more specific >> >> than "Re: Contents of melbourne-pug digest..." >> >> >> >> >> >> Today's Topics: >> >> >> >> 1. Re: python-based wiki with nice query-/template-ability? >> >> (Noon Silk) >> >> 2. Re: python-based wiki with nice query-/template-ability? >> >> (Anthony Briggs) >> >> >> >> >> >> ---------------------------------------------------------------------- >> >> >> >> Message: 1 >> >> Date: Thu, 30 Jan 2014 14:53:20 +1100 >> >> From: Noon Silk >> >> To: Melbourne Python Users Group >> >> Subject: Re: [melbourne-pug] python-based wiki with nice >> >> query-/template-ability? >> >> Message-ID: >> >> < >> >> CADt_azb8M9eBdeoq2L8UuWHvNj8hcxaaE+4tKGe+RaDXTQsi6w at mail.gmail.com> >> >> Content-Type: text/plain; charset="iso-8859-1" >> >> >> >> > It might help if you gave us some more detail about what you're >> trying >> >> to >> >> > do, rather than a list of features. eg. The iPython notebook will let >> >> you >> >> > execute arbitrary code, but I don't know whether it can introspect >> and >> >> > pull bits of other pages in the same notebook. >> >> >> >> I want a Wiki - community editable, versionable, trivial setup, with >> some >> >> customisability to query the pages that the wiki has, and obtain bits >> of >> >> the pages - say I create a template page and it always contains >> sections >> >> "Description, Example, Json" and then I want to obtain each "Example" >> from >> >> each "page" that I have queried and do things with it; like perhaps >> create >> >> a graph. >> >> >> >> Something very similar to FindStat.org, really - >> >> http://www.findstat.org/(which uses MoinMoin). Note that while this >> >> looks like it makes a lot of >> >> use of MoinMoin, infact almost all the work is done through MoinMoin >> >> "macros", written in Python. I want to re-use as much of the wiki as >> >> possible. >> >> >> >> >> >> >> >> On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < >> anthony.briggs at gmail.com >> >> >wrote: >> >> >> >> > Trac is pretty painful to set up, from memory. >> >> > >> >> > It might help if you gave us some more detail about what you're >> trying >> >> to >> >> > do, rather than a list of features. eg. The iPython notebook will let >> >> you >> >> > execute arbitrary code, but I don't know whether it can introspect >> and >> >> pull >> >> > bits of other pages in the same notebook. >> >> > >> >> > Failling that, it might be relatively easy to roll your own, either >> with >> >> > Django or some combination of Flask/Peewee/Jinja/similar. >> >> > >> >> > Anthony >> >> > >> >> > >> >> > >> >> > On 30 January 2014 13:36, Noon Silk wrote: >> >> > >> >> >> > There is Django snippets ... https://djangosnippets.org >> >> >> > and Pastebin ... http://pastebin.com/ >> >> >> >> >> >> ..., these are both websites. I'm looking for something to customise >> >> >> myself. >> >> >> >> >> >> >> >> >> > Also, have you looked at the Trac wiki? Most people would use it >> for >> >> >> > the ticketing but it also has useful wiki with markup permitting >> >> code. >> >> >> >> >> >> I hadn't considered Trac for this, thanks for reminding me about it. >> >> I'm >> >> >> not sure it's right, though. >> >> >> >> >> >> >> >> >> >> >> >> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < >> miked at dewhirst.com.au >> >> >wrote: >> >> >> >> >> >>> On 30/01/2014 11:56am, Noon Silk wrote: >> >> >>> >> >> >>>> Hello, >> >> >>>> >> >> >>>> So I'm interested in a python-based wiki that I can write >> >> arbitrary >> >> >>>> python code in; perhaps with a view to: >> >> >>>> 1) Creating specific templates, >> >> >>>> 2) Arbitrarily querying the list of pages, >> >> >>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a >> section in >> >> >>>> the template as "json", then I'd want to grab the json from pages >> A, >> >> B, >> >> >>>> X, Y >> >> >>>> >> >> >>>> Anyone know of something out there that does this? >> >> >>>> >> >> >>> >> >> >>> There is Django snippets ... https://djangosnippets.org >> >> >>> and Pastebin ... http://pastebin.com/ >> >> >>> >> >> >>> Also, have you looked at the Trac wiki? Most people would use it >> for >> >> the >> >> >>> ticketing but it also has useful wiki with markup permitting code. >> >> >>> >> >> >>> Mike >> >> >>> >> >> >>> At the moment all >> >> >>> >> >> >>>> I can think of is MoinMoin [1]. >> >> >>>> >> >> >>>> [1] http://moinmo.in/MoinMoinWiki >> >> >>>> -- >> >> >>>> Noon Silk >> >> >>>> >> >> >>>> Fancy a quantum lunch? >> https://sites.google.com/site/quantumlunch/ >> >> >>>> >> >> >>>> "Every morning when I wake up, I experience an exquisite joy -- >> the >> >> joy >> >> >>>> of being this signature." >> >> >>>> >> >> >>>> >> >> >>>> _______________________________________________ >> >> >>>> melbourne-pug mailing list >> >> >>>> melbourne-pug at python.org >> >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >>>> >> >> >>>> >> >> >>> _______________________________________________ >> >> >>> melbourne-pug mailing list >> >> >>> melbourne-pug at python.org >> >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >>> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> Noon Silk >> >> >> >> >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> >> >> >> >> "Every morning when I wake up, I experience an exquisite joy -- the >> joy >> >> >> of being this signature." >> >> >> >> >> >> _______________________________________________ >> >> >> melbourne-pug mailing list >> >> >> melbourne-pug at python.org >> >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> >> >> >> >> > >> >> > _______________________________________________ >> >> > melbourne-pug mailing list >> >> > melbourne-pug at python.org >> >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > >> >> > >> >> >> >> >> >> -- >> >> Noon Silk >> >> >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> >> of being this signature." >> >> -------------- next part -------------- >> >> An HTML attachment was scrubbed... >> >> URL: < >> >> >> http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/619b8947/attachment-0001.html >> >> > >> >> >> >> ------------------------------ >> >> >> >> Message: 2 >> >> Date: Thu, 30 Jan 2014 15:11:37 +1100 >> >> From: Anthony Briggs >> >> To: Melbourne Python Users Group >> >> Subject: Re: [melbourne-pug] python-based wiki with nice >> >> query-/template-ability? >> >> Message-ID: >> >> < >> >> CAO4-38_ea+ass4aeochGy6UgogXN70g5L5YBwrGoWCuw+yhLHQ at mail.gmail.com> >> >> Content-Type: text/plain; charset="iso-8859-1" >> >> >> >> I don't know of anything like that off of the top of my head, but from >> a >> >> quick search there are a few lightweight wikis around which might be >> >> possible to hack on, eg. https://pypi.python.org/pypi/djiki and >> >> https://pypi.python.org/pypi/valet. Perhaps they might get you further >> >> than >> >> MoinMoin? >> >> >> >> >> >> On 30 January 2014 14:53, Noon Silk wrote: >> >> >> >> > > It might help if you gave us some more detail about what you're >> trying >> >> > to >> >> > > do, rather than a list of features. eg. The iPython notebook will >> let >> >> > you >> >> > > execute arbitrary code, but I don't know whether it can introspect >> and >> >> > > pull bits of other pages in the same notebook. >> >> > >> >> > I want a Wiki - community editable, versionable, trivial setup, with >> >> some >> >> > customisability to query the pages that the wiki has, and obtain >> bits of >> >> > the pages - say I create a template page and it always contains >> sections >> >> > "Description, Example, Json" and then I want to obtain each "Example" >> >> from >> >> > each "page" that I have queried and do things with it; like perhaps >> >> create >> >> > a graph. >> >> > >> >> > Something very similar to FindStat.org, really - >> >> http://www.findstat.org/(which uses MoinMoin). Note that while this >> >> looks like it makes a lot of >> >> > use of MoinMoin, infact almost all the work is done through MoinMoin >> >> > "macros", written in Python. I want to re-use as much of the wiki as >> >> > possible. >> >> > >> >> > >> >> > >> >> > On Thu, Jan 30, 2014 at 2:23 PM, Anthony Briggs < >> >> anthony.briggs at gmail.com>wrote: >> >> > >> >> >> Trac is pretty painful to set up, from memory. >> >> >> >> >> >> It might help if you gave us some more detail about what you're >> trying >> >> to >> >> >> do, rather than a list of features. eg. The iPython notebook will >> let >> >> you >> >> >> execute arbitrary code, but I don't know whether it can introspect >> and >> >> pull >> >> >> bits of other pages in the same notebook. >> >> >> >> >> >> Failling that, it might be relatively easy to roll your own, either >> >> with >> >> >> Django or some combination of Flask/Peewee/Jinja/similar. >> >> >> >> >> >> Anthony >> >> >> >> >> >> >> >> >> >> >> >> On 30 January 2014 13:36, Noon Silk wrote: >> >> >> >> >> >>> > There is Django snippets ... https://djangosnippets.org >> >> >>> > and Pastebin ... http://pastebin.com/ >> >> >>> >> >> >>> ..., these are both websites. I'm looking for something to >> customise >> >> >>> myself. >> >> >>> >> >> >>> >> >> >>> > Also, have you looked at the Trac wiki? Most people would use it >> for >> >> >>> > the ticketing but it also has useful wiki with markup permitting >> >> code. >> >> >>> >> >> >>> I hadn't considered Trac for this, thanks for reminding me about >> it. >> >> I'm >> >> >>> not sure it's right, though. >> >> >>> >> >> >>> >> >> >>> >> >> >>> On Thu, Jan 30, 2014 at 12:17 PM, Mike Dewhirst < >> >> miked at dewhirst.com.au>wrote: >> >> >>> >> >> >>>> On 30/01/2014 11:56am, Noon Silk wrote: >> >> >>>> >> >> >>>>> Hello, >> >> >>>>> >> >> >>>>> So I'm interested in a python-based wiki that I can write >> >> arbitrary >> >> >>>>> python code in; perhaps with a view to: >> >> >>>>> 1) Creating specific templates, >> >> >>>>> 2) Arbitrarily querying the list of pages, >> >> >>>>> 3) Obtaining specific "bits" of pages (Perhaps I mark a >> section >> >> in >> >> >>>>> the template as "json", then I'd want to grab the json from >> pages A, >> >> >>>>> B, X, Y >> >> >>>>> >> >> >>>>> Anyone know of something out there that does this? >> >> >>>>> >> >> >>>> >> >> >>>> There is Django snippets ... https://djangosnippets.org >> >> >>>> and Pastebin ... http://pastebin.com/ >> >> >>>> >> >> >>>> Also, have you looked at the Trac wiki? Most people would use it >> for >> >> >>>> the ticketing but it also has useful wiki with markup permitting >> >> code. >> >> >>>> >> >> >>>> Mike >> >> >>>> >> >> >>>> At the moment all >> >> >>>> >> >> >>>>> I can think of is MoinMoin [1]. >> >> >>>>> >> >> >>>>> [1] http://moinmo.in/MoinMoinWiki >> >> >>>>> -- >> >> >>>>> Noon Silk >> >> >>>>> >> >> >>>>> Fancy a quantum lunch? >> https://sites.google.com/site/quantumlunch/ >> >> >>>>> >> >> >>>>> "Every morning when I wake up, I experience an exquisite joy -- >> the >> >> joy >> >> >>>>> of being this signature." >> >> >>>>> >> >> >>>>> >> >> >>>>> _______________________________________________ >> >> >>>>> melbourne-pug mailing list >> >> >>>>> melbourne-pug at python.org >> >> >>>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >>>>> >> >> >>>>> >> >> >>>> _______________________________________________ >> >> >>>> melbourne-pug mailing list >> >> >>>> melbourne-pug at python.org >> >> >>>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >>>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> -- >> >> >>> Noon Silk >> >> >>> >> >> >>> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> >>> >> >> >>> "Every morning when I wake up, I experience an exquisite joy -- the >> >> joy >> >> >>> of being this signature." >> >> >>> >> >> >>> _______________________________________________ >> >> >>> melbourne-pug mailing list >> >> >>> melbourne-pug at python.org >> >> >>> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >>> >> >> >>> >> >> >> >> >> >> _______________________________________________ >> >> >> melbourne-pug mailing list >> >> >> melbourne-pug at python.org >> >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> >> >> >> >> > >> >> > >> >> > -- >> >> > Noon Silk >> >> > >> >> > Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> > >> >> > "Every morning when I wake up, I experience an exquisite joy -- the >> joy >> >> > of being this signature." >> >> > >> >> > _______________________________________________ >> >> > melbourne-pug mailing list >> >> > melbourne-pug at python.org >> >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> >> > >> >> > >> >> -------------- next part -------------- >> >> An HTML attachment was scrubbed... >> >> URL: < >> >> >> http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a667f201/attachment.html >> >> > >> >> >> >> ------------------------------ >> >> >> >> Subject: Digest Footer >> >> >> >> _______________________________________________ >> >> melbourne-pug mailing list >> >> melbourne-pug at python.org >> >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> >> >> >> ------------------------------ >> >> >> >> End of melbourne-pug Digest, Vol 91, Issue 19 >> >> ********************************************* >> >> >> > >> > >> > _______________________________________________ >> > melbourne-pug mailing list >> > melbourne-pug at python.org >> > https://mail.python.org/mailman/listinfo/melbourne-pug >> > >> > >> >> >> -- >> Noon Silk >> >> Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ >> >> "Every morning when I wake up, I experience an exquisite joy -- the joy >> of being this signature." >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: < >> http://mail.python.org/pipermail/melbourne-pug/attachments/20140130/a88551cd/attachment.html >> > >> >> ------------------------------ >> >> Subject: Digest Footer >> >> _______________________________________________ >> melbourne-pug mailing list >> melbourne-pug at python.org >> https://mail.python.org/mailman/listinfo/melbourne-pug >> >> >> ------------------------------ >> >> End of melbourne-pug Digest, Vol 91, Issue 21 >> ********************************************* >> > > > _______________________________________________ > melbourne-pug mailing list > melbourne-pug at python.org > https://mail.python.org/mailman/listinfo/melbourne-pug > > -- Noon Silk Fancy a quantum lunch? https://sites.google.com/site/quantumlunch/ "Every morning when I wake up, I experience an exquisite joy -- the joy of being this signature." -------------- next part -------------- An HTML attachment was scrubbed... URL: