[Mailman-Users] Mailman Web interface disappeared after upgrade to Jessie

Hedy Dargère hedy.dargere at spheerys.fr
Thu Mar 24 09:18:12 EDT 2016


Hi Mark,

Thank you for your answer :)

I followed your suggestions but nothing change.
I always have in my apache log :

78.xx.yyy.zzz - - [24/Mar/2016:14:17:36 +0100] "GET /listinfo HTTP/1.1" 404 504 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Firefox/45.0"


Here my file /etc/apache2/sites-enabled/mailman :

####################################
####################################

# Sample configuration for Debian mailman with Apache

# We can find mailman here:
#ScriptAlias /cgi-bin/mailman/ /usr/lib/cgi-bin/mailman/
# And the public archives:
Alias /pipermail/ /var/lib/mailman/archives/public/
# Logos:
Alias /images/mailman/ /usr/share/images/mailman/

# Use this if you don't want the "cgi-bin" component in your URL:
# In case you want to access mailman through a shorter URL you should enable
# this:
#ScriptAlias /mailman/ /usr/lib/cgi-bin/mailman/
ScriptAlias / /usr/lib/cgi-bin/mailman/
# In this case you need to set the DEFAULT_URL_PATTERN in
# /etc/mailman/mm_cfg.py to http://%s/mailman/ for the cookie
# authentication code to work.  Note that you need to change the base
# URL for all the already-created lists as well.

<Directory /usr/lib/cgi-bin/mailman/>
    AllowOverride None
    Options ExecCGI  FollowSymLinks
    AddHandler cgi-script .cgi
#    Order allow,deny
#    Allow from all
    Require all granted
</Directory>
<Directory /var/lib/mailman/archives/public/>
    Options FollowSymlinks
    AllowOverride None
#    Order allow,deny
#    Allow from all
    Require all granted
</Directory>
<Directory /usr/share/images/mailman/>
    AllowOverride None
#    Order allow,deny
#    Allow from all
    Require all granted
</Directory>


## The following describes how to configure mailman on
## a dedicated virtual host, courtesy Marco d'Itri.

# Add these lines in /etc/mailman/mm_cfg.py:
#DEFAULT_EMAIL_HOST = 'lists.example.net'
#DEFAULT_URL_HOST = 'lists.example.net'
#DEFAULT_URL_PATTERN = 'http://%s/'

#<VirtualHost *>
<VirtualHost *:80 *:443>
  ServerName listes.np11.org
  DocumentRoot /var/www/lists
  ErrorLog /var/log/apache2/lists-error.log
  CustomLog /var/log/apache2/lists-access.log combined

  <Directory /var/lib/mailman/archives/>
    Options FollowSymLinks
    AllowOverride None
  </Directory>




Alias /pipermail/ /var/lib/mailman/archives/public/
Alias /images/mailman/ /usr/share/images/mailman/
ScriptAlias /admin /usr/lib/cgi-bin/mailman/admin
ScriptAlias /admindb /usr/lib/cgi-bin/mailman/admindb
ScriptAlias /confirm /usr/lib/cgi-bin/mailman/confirm
ScriptAlias /create /usr/lib/cgi-bin/mailman/create
ScriptAlias /edithtml /usr/lib/cgi-bin/mailman/edithtml
ScriptAlias /listinfo /usr/lib/cgi-bin/mailman/listinfo
ScriptAlias /options /usr/lib/cgi-bin/mailman/options
ScriptAlias /private /usr/lib/cgi-bin/mailman/private
ScriptAlias /rmlist /usr/lib/cgi-bin/mailman/rmlist
ScriptAlias /roster /usr/lib/cgi-bin/mailman/roster
ScriptAlias /subscribe /usr/lib/cgi-bin/mailman/subscribe
ScriptAlias /mailman/ /usr/lib/cgi-bin/mailman/
ScriptAlias / /usr/lib/cgi-bin/mailman/listinfo

<IfModule mod_rewrite.c>
RewriteEngine on

# Redirect to SSL if available

    <IfModule mod_ssl.c>
      RewriteCond %{HTTPS} !^on$ [NC]
      RewriteRule . https://%{HTTP_HOST}%{REQUEST_URI}  [L]
    </IfModule>

# Redirect root access to mailman list

RewriteRule ^$ /listinfo [R=permanent,L]
RewriteRule ^/$ /listinfo [R=permanent,L]

</IfModule>


</VirtualHost>

####################################
####################################




And now my /etc/apache2/apache2.conf     :


 
####################################
####################################
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#	/etc/apache2/
#	|-- apache2.conf
#	|	`--  ports.conf
#	|-- mods-enabled
#	|	|-- *.load
#	|	`-- *.conf
#	|-- conf-enabled
#	|	`-- *.conf
# 	`-- sites-enabled
#	 	`-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
Mutex file:${APACHE_LOCK_DIR} default

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
	Options FollowSymLinks
	AllowOverride None
	Require all denied
</Directory>

<Directory /usr/share>
	AllowOverride None
	Require all granted
</Directory>

<Directory /var/www/>
	Options Indexes FollowSymLinks
	AllowOverride None
	Require all granted
</Directory>

#<Directory /srv/>
#	Options Indexes FollowSymLinks
#	AllowOverride None
#	Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
	Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet


####################################
####################################

And finally my /etc/mailman/mm_cfg.py :

####################################
####################################
# -*- python -*-

# Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software 
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 USA


"""This is the module which takes your site-specific settings.

From a raw distribution it should be copied to mm_cfg.py.  If you
already have an mm_cfg.py, be careful to add in only the new settings
you want.  The complete set of distributed defaults, with annotation,
are in ./Defaults.  In mm_cfg, override only those you want to
change, after the

  from Defaults import *

line (see below).

Note that these are just default settings - many can be overridden via the
admin and user interfaces on a per-list or per-user basis.

Note also that some of the settings are resolved against the active list
setting by using the value as a format string against the
list-instance-object's dictionary - see the distributed value of
DEFAULT_MSG_FOOTER for an example."""


#######################################################
#    Here's where we get the distributed defaults.    #

from Defaults import *

##############################################################
# Put YOUR site-specific configuration below, in mm_cfg.py . #
# See Defaults.py for explanations of the values.            #

#-------------------------------------------------------------
# The name of the list Mailman uses to send password reminders
# and similar. Don't change if you want mailman-owner to be
# a valid local part.
MAILMAN_SITE_LIST = 'mailman'

#-------------------------------------------------------------
# If you change these, you have to configure your http server
# accordingly (Alias and ScriptAlias directives in most httpds)
#DEFAULT_URL_PATTERN = 'http://%s/cgi-bin/mailman/'
DEFAULT_URL_PATTERN = 'http://%s/'
IMAGE_LOGOS         = '/images/mailman/'

#-------------------------------------------------------------
# Default domain for email addresses of newly created MLs
DEFAULT_EMAIL_HOST = 'listes.np11.org'
#-------------------------------------------------------------
# Default host for web interface of newly created MLs
DEFAULT_URL_HOST   = 'listes.np11.org'
#-------------------------------------------------------------
# Required when setting any of its arguments.
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)

#-------------------------------------------------------------
# The default language for this server.
DEFAULT_SERVER_LANGUAGE = 'fr'

#-------------------------------------------------------------
# Iirc this was used in pre 2.1, leave it for now
USE_ENVELOPE_SENDER    = 0              # Still used?

#-------------------------------------------------------------
# Unset send_reminders on newly created lists
DEFAULT_SEND_REMINDERS = 0

#-------------------------------------------------------------
# Uncomment this if you configured your MTA such that it
# automatically recognizes newly created lists.
# (see /usr/share/doc/mailman/README.Exim4.Debian or
# /usr/share/mailman/postfix-to-mailman.py)
# MTA=None   # Misnomer, suppresses alias output on newlist

#-------------------------------------------------------------
# Uncomment if you use Postfix virtual domains (but not
# postfix-to-mailman.py), but be sure to see
# /usr/share/doc/mailman/README.Debian first.
MTA='Postfix'

#-------------------------------------------------------------
# Uncomment if you want to filter mail with SpamAssassin. For
# more information please visit this website:
# http://www.jamesh.id.au/articles/mailman-spamassassin/
# GLOBAL_PIPELINE.insert(1, 'SpamAssassin')

# Note - if you're looking for something that is imported from mm_cfg, but you
# didn't find it above, it's probably in /usr/lib/mailman/Mailman/Defaults.py.




More information about the Mailman-Users mailing list