[Mailman-Users] no outgoing mail with postfix

[Tamara Yoggev]

Thanks a lot for your reply.

After going through the FAQ,
I performed the following steps and the problem was solved:

1) started the qrunner. (A bit embarrassing, don't know how it was stopped)
2) In mm_cfg.py, added SMTPHOST=<my ip address>
3) In /etc/nsswitch.conf switched:
    hosts: files nis 
   to:
   hosts: dns files nis

and that solved all my problems.

Thanks again,
Tamara
----- Original Message ----- 
From: "Jim Tittsler" <jwt at onjapan.net>
To: "Tamara Yoggev" <tyoggev at 013.net>
Cc: <mailman-users at python.org>
Sent: Wednesday, April 13, 2005 10:46 AM
Subject: Re: [Mailman-Users] no outgoing mail with postfix


> On Apr 12, 2005, at 02:55, Tamara Yoggev wrote:
>> relay host, I can accept emails, but I can't seem to send any emails, 
>> but I get NO error in the log file. so I am totally clueless as to 
>> what the problem is.
> 
> Meaning there is no error in either your Postfix logs or your Mailman 
> logs?
> 
> Did you try check the troubleshooting points suggested by the FAQ?
>   <http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.014.htp>
> 
>> Everything seems fine! except the message doesn't get posted to all 
>> the list members!
> 
> Are the messages collecting in the Mailman qfiles/in (did you remember 
> to start mailman?) or qfiles/shunt (check Mailman's error log again)?
> 
> -- 
> Jim Tittsler     http://www.OnJapan.net/      GPG: 0x01159DB6
> Python Starship  http://Starship.Python.net/crew/jwt/
> Mailman IRC      irc://irc.freenode.net/#mailman
>