[Mailman-Users] master-qrunner.pid

[Jon Carnes]

I've never seen this before, but I have seen in the code that some of
the daemons are set to stop themselves if it's taking too long to run a
process.  I suggest that you look at the virtual server and see if you
are getting enough cycles while Mailman is running.

The daemon that is most sensitive to these time considerations is the
archiver.

Not much help, but it gives you something to look at...

Jon Carnes

On Tue, 2003-02-04 at 13:27, VLists.Net Support wrote:
> Someone asked about the content of the qrunner log and another some other
> questions about processes and such, as well as the status of the archives.
> 
> The archives are a bit behind.  The last seven messages to the list have
> yet to appear in the archive pages.  In fact, I notice a huge time lag
> between the last message date and the last archive time, as shown at the
> bottom of the archive page when sorted by date.
> 
> Last message date: Sun Feb 2 19:39:42 GMT 2003
> Archived on: Sun Feb 2 21:28:56 GMT 2003
> 
> Here's the qrunner log for the date that it apparantly last shut down and
> required a manual start...
> 
> Jan 10 00:00:21 2003 (74407) CommandRunner qrunner started.
> Jan 29 06:06:47 2003 (74386) ArchRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:06:47 2003 (74386) ArchRunner qrunner exiting.
> Jan 29 06:06:47 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74386, sig: None, sts: 15, class: ArchRunner, slice: 1/1) 
> Jan 29 06:06:54 2003 (74397) OutgoingRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:06:54 2003 (74397) OutgoingRunner qrunner exiting.
> Jan 29 06:06:55 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74397, sig: None, sts: 15, class: OutgoingRunner, slice: 1/1) 
> Jan 29 06:07:02 2003 (74388) IncomingRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:07:02 2003 (74388) IncomingRunner qrunner exiting.
> Jan 29 06:07:02 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74388, sig: None, sts: 15, class: IncomingRunner, slice: 1/1) 
> Jan 29 06:07:10 2003 (74407) CommandRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:07:10 2003 (74407) CommandRunner qrunner exiting.
> Jan 29 06:07:10 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74407, sig: None, sts: 15, class: CommandRunner, slice: 1/1) 
> Jan 29 06:07:23 2003 (74387) BounceRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:07:23 2003 (74387) BounceRunner qrunner exiting.
> Jan 29 06:07:23 2003 (97045) Master watcher caught SIGTERM.  Exiting.
> Jan 29 06:07:23 2003 (74405) VirginRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:07:23 2003 (74405) VirginRunner qrunner exiting.
> Jan 29 06:07:23 2003 (74395) NewsRunner qrunner caught SIGTERM.  Stopping.
> Jan 29 06:07:23 2003 (74395) NewsRunner qrunner exiting.
> Jan 29 06:07:24 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74387, sig: None, sts: 15, class: BounceRunner, slice: 1/1) 
> Jan 29 06:07:24 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74395, sig: None, sts: 15, class: NewsRunner, slice: 1/1) 
> Jan 29 06:07:24 2003 (97045) Master qrunner detected subprocess exit
> (pid: 74405, sig: None, sts: 15, class: VirginRunner, slice: 1/1) 
> Feb 02 04:37:14 2003 (87886) BounceRunner qrunner started.
> 
> As for the process into, here's the output from a top command, which should
> take care of that...
> 
> Jan 09 07:00:46 2003 (82843) NewsRunner qrunner exiting.
> Jan 09 07:00:46 2003 (82837) Master qrunner detected subprocess exit
> (pid: 82845, sig: None, sts: 15, class: VirginRunner, slice: 1/1)   
> Jan 09 07:00:46 2003 (82837) Master qrunner detected subprocess exit
> 
> last pid: 671506432;  load averag 0.16,  0.35,  0.470.49
>           up 24+18:50:21  01:53:03
> 25 processes:  1 running, 24 sleeping
> CPU states:  0.4% user,  0.0% nice,  0.8% system,  0.0% interrupt, 98.8% idle
> Mem: 613M Active, 146M Inact, 154M Wired, 48M Cache, 112M Buf, 44M Free
> Swap: 1024M Total, 30M Used, 994M Free, 2% Inuse
> 
> It should be noted that this is a virtual server. 
> 
> 
> 
> ------------------------------------------------------
> Mailman-Users mailing list
> Mailman-Users at python.org
> http://mail.python.org/mailman/listinfo/mailman-users
> Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
> Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
> 
> This message was sent to: jonc at nc.rr.com
> Unsubscribe or change your options at
> http://mail.python.org/mailman/options/mailman-users/jonc%40nc.rr.com