[Expat-discuss] Am I on the right list?

John.Hockaday at ga.gov.au John.Hockaday at ga.gov.au
Thu Jul 29 03:56:08 CEST 2004


Hi all,

I sent out the email below to this list but no-one has replied.  Am I on the
right list?  If not which list should I subscribe to?  If I am on the right
list is it just that no-one has a Solaris 8 system or does no-one understand
my question? Should I re-phrase my email in some other way?  Do I need to
provide more information?

Thanks.


John

> -----Original Message-----
> From: Hockaday John 
> Sent: Monday, 26 July 2004 1:56 PM
> To: expat-discuss at libexpat.org
> Subject: [Expat-discuss] Problems compiling expat 1.95.8 on 
> Solaris 8platform
> 
> 
> Hi,
> 
> I am having troubles compiling Expat 1.95.8 on a Solaris 8 
> platform using gcc
> 3.4.1.  If I configure with the following options:
> 
> ./configure --prefix=/public/data/asddgate --enable-static
> 
> And "make" there are no compilation errors but if I do a 
> "make check" I get
> the following errors:
> 
> gcc -g -O2 -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions
> -DHAVE_EX
> PAT_CONFIG_H   -I./lib -I. -o tests/runtests.o -c tests/runtests.c
> gcc -g -O2 -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions
> -DHAVE_EX
> PAT_CONFIG_H   -I./lib -I. -o tests/chardata.o -c tests/chardata.c
> gcc -g -O2 -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions
> -DHAVE_EX
> PAT_CONFIG_H   -I./lib -I. -o tests/minicheck.o -c tests/minicheck.c
> /bin/ksh ./libtool --silent --mode=link gcc -g -O2 -Wall 
> -Wmissing-prototypes
> -W
> strict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H   -I./lib -I.  -o
> tests/run
> tests tests/runtests.o tests/chardata.o tests/minicheck.o libexpat.la
> tests/runtests
> Expat version: expat_1.95.4
> make: *** [check] Segmentation Fault (core dumped)
> 
> I noticed that the "configure" command couldn't find check.h.  This is
> probably because check.h is in /public/data/asddgate/include/.  
> 
> I then configured using the following options:
> 
> CPPFLAGS="-I/public/data/asddgate/include" ./configure
> --prefix=/public/data/asddgate --enable-static
> 
> And the configure command found check.h but when I did a make 
> I got the
> following errors:
> 
> /bin/ksh ./libtool --silent --mode=compile gcc -g -O2 -Wall
> -Wmissing-prototypes
>  -Wstrict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H
> -I/public/data/asddgate
> /include -I./lib -I. -o lib/xmlparse.lo -c lib/xmlparse.c
> /bin/ksh ./libtool --silent --mode=compile gcc -g -O2 -Wall
> -Wmissing-prototypes
>  -Wstrict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H
> -I/public/data/asddgate
> /include -I./lib -I. -o lib/xmltok.lo -c lib/xmltok.c
> /bin/ksh ./libtool --silent --mode=compile gcc -g -O2 -Wall
> -Wmissing-prototypes
>  -Wstrict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H
> -I/public/data/asddgate
> /include -I./lib -I. -o lib/xmlrole.lo -c lib/xmlrole.c
> /bin/ksh ./libtool --silent --mode=link gcc -g -O2 -Wall 
> -Wmissing-prototypes
> -W
> strict-prototypes -fexceptions -DHAVE_EXPAT_CONFIG_H
> -I/public/data/asddgate/in
> clude -I./lib -I. -no-undefined -version-info 5:0:5 -rpath
> /public/data/asddgate
> /lib  -o libexpat.la lib/xmlparse.lo lib/xmltok.lo lib/xmlrole.lo
> gcc -g -O2 -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions
> -DHAVE_EX
> PAT_CONFIG_H  -I/public/data/asddgate/include -I./lib -I. -o 
> xmlwf/xmlwf.o -c
> xm
> lwf/xmlwf.c
> xmlwf/xmlwf.c:24: error: parse error before "characterData"
> xmlwf/xmlwf.c:25: warning: return type defaults to `int'
> xmlwf/xmlwf.c:25: warning: no previous prototype for 'characterData'
> xmlwf/xmlwf.c:117: error: parse error before "startElement"
> xmlwf/xmlwf.c:118: warning: return type defaults to `int'
> xmlwf/xmlwf.c:118: warning: no previous prototype for 'startElement'
> xmlwf/xmlwf.c:141: error: parse error before "endElement"
> xmlwf/xmlwf.c:142: warning: return type defaults to `int'
> xmlwf/xmlwf.c:142: warning: no previous prototype for 'endElement'
> xmlwf/xmlwf.c:163: error: parse error before "startElementNS"
> xmlwf/xmlwf.c:164: warning: return type defaults to `int'
> xmlwf/xmlwf.c:164: warning: no previous prototype for 'startElementNS'
> xmlwf/xmlwf.c:212: error: parse error before "endElementNS"
> xmlwf/xmlwf.c:213: warning: return type defaults to `int'
> xmlwf/xmlwf.c:213: warning: no previous prototype for 'endElementNS'
> xmlwf/xmlwf.c:231: error: parse error before "processingInstruction"
> xmlwf/xmlwf.c:233: warning: return type defaults to `int'
> xmlwf/xmlwf.c:233: warning: no previous prototype for 
> 'processingInstruction'
> xmlwf/xmlwf.c:247: error: parse error before "defaultCharacterData"
> xmlwf/xmlwf.c:248: warning: return type defaults to `int'
> xmlwf/xmlwf.c:248: warning: no previous prototype for 
> 'defaultCharacterData'
> xmlwf/xmlwf.c:253: error: parse error before "defaultStartElement"
> xmlwf/xmlwf.c:255: warning: return type defaults to `int'
> xmlwf/xmlwf.c:255: warning: no previous prototype for 
> 'defaultStartElement'
> xmlwf/xmlwf.c:260: error: parse error before "defaultEndElement"
> xmlwf/xmlwf.c:261: warning: return type defaults to `int'
> xmlwf/xmlwf.c:261: warning: no previous prototype for 
> 'defaultEndElement'
> xmlwf/xmlwf.c:266: error: parse error before 
> "defaultProcessingInstruction"
> xmlwf/xmlwf.c:268: warning: return type defaults to `int'
> xmlwf/xmlwf.c:268: warning: no previous prototype for
> 'defaultProcessingInstruct
> ion'
> xmlwf/xmlwf.c:273: error: parse error before "nopCharacterData"
> xmlwf/xmlwf.c:274: warning: return type defaults to `int'
> xmlwf/xmlwf.c:274: warning: no previous prototype for 
> 'nopCharacterData'
> xmlwf/xmlwf.c:278: error: parse error before "nopStartElement"
> xmlwf/xmlwf.c:279: warning: return type defaults to `int'
> xmlwf/xmlwf.c:279: warning: no previous prototype for 
> 'nopStartElement'
> xmlwf/xmlwf.c:283: error: parse error before "nopEndElement"
> xmlwf/xmlwf.c:284: warning: return type defaults to `int'
> xmlwf/xmlwf.c:284: warning: no previous prototype for 'nopEndElement'
> xmlwf/xmlwf.c:288: error: parse error before 
> "nopProcessingInstruction"
> xmlwf/xmlwf.c:290: warning: return type defaults to `int'
> xmlwf/xmlwf.c:290: warning: no previous prototype for
> 'nopProcessingInstruction'
> xmlwf/xmlwf.c:294: error: parse error before "markup"
> xmlwf/xmlwf.c:295: warning: return type defaults to `int'
> xmlwf/xmlwf.c:295: warning: no previous prototype for 'markup'
> xmlwf/xmlwf.c:328: error: parse error before "metaStartElement"
> xmlwf/xmlwf.c:330: warning: return type defaults to `int'
> xmlwf/xmlwf.c:330: warning: no previous prototype for 
> 'metaStartElement'
> xmlwf/xmlwf.c:363: error: parse error before "metaEndElement"
> xmlwf/xmlwf.c:364: warning: return type defaults to `int'
> xmlwf/xmlwf.c:364: warning: no previous prototype for 'metaEndElement'
> xmlwf/xmlwf.c:373: error: parse error before 
> "metaProcessingInstruction"
> xmlwf/xmlwf.c:375: warning: return type defaults to `int'
> xmlwf/xmlwf.c:375: warning: no previous prototype for
> 'metaProcessingInstruction
> '
> xmlwf/xmlwf.c:386: error: parse error before "metaComment"
> xmlwf/xmlwf.c:387: warning: return type defaults to `int'
> xmlwf/xmlwf.c:387: warning: no previous prototype for 'metaComment'
> xmlwf/xmlwf.c:398: error: parse error before "metaStartCdataSection"
> xmlwf/xmlwf.c:399: warning: return type defaults to `int'
> xmlwf/xmlwf.c:399: warning: no previous prototype for 
> 'metaStartCdataSection'
> xmlwf/xmlwf.c:408: error: parse error before "metaEndCdataSection"
> xmlwf/xmlwf.c:409: warning: return type defaults to `int'
> xmlwf/xmlwf.c:409: warning: no previous prototype for 
> 'metaEndCdataSection'
> xmlwf/xmlwf.c:418: error: parse error before "metaCharacterData"
> xmlwf/xmlwf.c:419: warning: return type defaults to `int'
> xmlwf/xmlwf.c:419: warning: no previous prototype for 
> 'metaCharacterData'
> xmlwf/xmlwf.c:430: error: parse error before "metaStartDoctypeDecl"
> xmlwf/xmlwf.c:435: warning: return type defaults to `int'
> xmlwf/xmlwf.c:435: warning: no previous prototype for 
> 'metaStartDoctypeDecl'
> xmlwf/xmlwf.c:444: error: parse error before "metaEndDoctypeDecl"
> xmlwf/xmlwf.c:445: warning: return type defaults to `int'
> xmlwf/xmlwf.c:445: warning: no previous prototype for 
> 'metaEndDoctypeDecl'
> xmlwf/xmlwf.c:454: error: parse error before "metaNotationDecl"
> xmlwf/xmlwf.c:459: warning: return type defaults to `int'
> xmlwf/xmlwf.c:459: warning: no previous prototype for 
> 'metaNotationDecl'
> xmlwf/xmlwf.c:476: error: parse error before "metaEntityDecl"
> xmlwf/xmlwf.c:485: warning: return type defaults to `int'
> xmlwf/xmlwf.c:485: warning: no previous prototype for 'metaEntityDecl'
> xmlwf/xmlwf.c:520: error: parse error before "metaStartNamespaceDecl"
> xmlwf/xmlwf.c:523: warning: return type defaults to `int'
> xmlwf/xmlwf.c:523: warning: no previous prototype for
> 'metaStartNamespaceDecl'
> xmlwf/xmlwf.c:539: error: parse error before "metaEndNamespaceDecl"
> xmlwf/xmlwf.c:540: warning: return type defaults to `int'
> xmlwf/xmlwf.c:540: warning: no previous prototype for 
> 'metaEndNamespaceDecl'
> xmlwf/xmlwf.c:550: error: parse error before "unknownEncodingConvert"
> xmlwf/xmlwf.c:551: warning: return type defaults to `int'
> xmlwf/xmlwf.c:551: warning: no previous prototype for
> 'unknownEncodingConvert'
> xmlwf/xmlwf.c:556: error: parse error before "unknownEncoding"
> xmlwf/xmlwf.c:557: warning: return type defaults to `int'
> xmlwf/xmlwf.c:557: warning: no previous prototype for 
> 'unknownEncoding'
> xmlwf/xmlwf.c:592: error: parse error before "notStandalone"
> xmlwf/xmlwf.c:593: warning: return type defaults to `int'
> xmlwf/xmlwf.c:593: warning: no previous prototype for 'notStandalone'
> xmlwf/xmlwf.c: In function `main':
> xmlwf/xmlwf.c:764: warning: passing arg 2 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:764: warning: passing arg 3 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:765: warning: passing arg 2 of 
> `XML_SetCharacterDataHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:766: warning: passing arg 2 of
> `XML_SetProcessingInstructionHandle
> r' from incompatible pointer type
> xmlwf/xmlwf.c:794: warning: passing arg 2 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:794: warning: passing arg 3 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:795: warning: passing arg 2 of
> `XML_SetProcessingInstructionHandle
> r' from incompatible pointer type
> xmlwf/xmlwf.c:796: warning: passing arg 2 of 
> `XML_SetCommentHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:798: warning: passing arg 2 of 
> `XML_SetCdataSectionHandler'
> from i
> ncompatible pointer type
> xmlwf/xmlwf.c:798: warning: passing arg 3 of 
> `XML_SetCdataSectionHandler'
> from i
> ncompatible pointer type
> xmlwf/xmlwf.c:799: warning: passing arg 2 of 
> `XML_SetCharacterDataHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:801: warning: passing arg 2 of 
> `XML_SetDoctypeDeclHandler' from
> in
> compatible pointer type
> xmlwf/xmlwf.c:801: warning: passing arg 3 of 
> `XML_SetDoctypeDeclHandler' from
> in
> compatible pointer type
> xmlwf/xmlwf.c:802: warning: passing arg 2 of 
> `XML_SetEntityDeclHandler' from
> inc
> ompatible pointer type
> xmlwf/xmlwf.c:803: warning: passing arg 2 of 
> `XML_SetNotationDeclHandler'
> from i
> ncompatible pointer type
> xmlwf/xmlwf.c:805: warning: passing arg 2 of 
> `XML_SetNamespaceDeclHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:805: warning: passing arg 3 of 
> `XML_SetNamespaceDeclHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:810: warning: passing arg 2 of 
> `XML_SetDefaultHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:811: warning: passing arg 2 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:811: warning: passing arg 3 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:812: warning: passing arg 2 of 
> `XML_SetCharacterDataHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:814: warning: passing arg 2 of
> `XML_SetProcessingInstructionHandle
> r' from incompatible pointer type
> xmlwf/xmlwf.c:818: warning: passing arg 2 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:818: warning: passing arg 3 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:820: warning: passing arg 2 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:820: warning: passing arg 3 of 
> `XML_SetElementHandler' from
> incomp
> atible pointer type
> xmlwf/xmlwf.c:821: warning: passing arg 2 of 
> `XML_SetCharacterDataHandler'
> from
> incompatible pointer type
> xmlwf/xmlwf.c:823: warning: passing arg 2 of
> `XML_SetProcessingInstructionHandle
> r' from incompatible pointer type
> make: *** [xmlwf/xmlwf.o] Error 1
> 
> Does anyone know how to fix this problem?
> 
> I also noticed that the configure command couldn't find 
> stdint.h. (checking
> for stdint.h... no).  I can't find stdint.h anywhare on my 
> system.  Could
> this be the problem?
> 
> Thanks in advance for any reply.
> 
> 
> John
> _______________________________________________
> Expat-discuss mailing list
> Expat-discuss at libexpat.org
> http://mail.libexpat.org/mailman/listinfo/expat-discuss
> 


More information about the Expat-discuss mailing list